oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl66.6m-02a 66.6mhz if saw filter 2.88mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl66.6m-02a january 2011 rev a 66.6mhz if saw filter 2.88mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=47nh output l2=82nh source/load impedance 50 ?
oscilent part number 813-sl66.6m-02a january 2011 rev a 66.6mhz if saw filter 2.88mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -5 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 66.5 66.6 66.7 insertion loss at fo db - 12.5 15.0 temperature coefficient ppm/c - -20 - amplitude ripple within fo 0.9 mhz db p-p - 0.1 0.5 group delay variation within fo 0.9 mhz nsec - 23 50 absolute delay at fo sec - 1.38 - bandwidth at ?1.0 db mhz 1.8 2.88 - bandwidth at ?3.0 db mhz - 3.38 - bandwidth at ?40.0 db mhz - 5.36 5.6 ultimate attenuation: - 40 48 -
oscilent part number 813-sl66.6m-02a january 2011 rev a 66.6mhz if saw filter 2.88mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?30.0 db bandwidth at ?40.0
oscilent part number 813-sl66.6m-02a january 2011 rev a 66.6mhz if saw filter 2.88mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo0.9mhz group delay variation fo0.9mhz smith chart
oscilent part number 813-sl66.6m-02a january 2011 rev a 66.6mhz if saw filter 2.88mhz bandwidth product specification p. 5 www.oscilent.com vswr
|