|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ds07-13740-1e fujitsu semiconductor data sheet 16-bit proprietary microcontroller cmos f 2 mc-16lx mb90378 series MB90F378/v378 description the mb90378 series is a line of general-purpose, 16-bit microcontrollers designed for those applications which require high-speed real-time processing. the instruction set is designed to be optimized for controller applications which inheriting the at architecture of f 2 mc-16lx family and allow a wide range of control tasks to be processed efficiently at high speed. a built-in lpc interface, serial irq and ps/2 interface simplifies communication with host cpu and ps/2 devices in computer system. moreover, smbus compliant i 2 c* 2 and a/d converter implements the smart battery control. with these features, the mb90378 series matches itself as keyboard controller with smart battery control. while inheriting the at architecture of the f 2 mc* 1 family, the instruction set for the f 2 mc-16lx cpu core of the mb90378 series incorporates additional instructions for high-level languages, supports extended addressing modes, and contains enhanced multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. in addition, the mb90378 series has an on-chip 32-bit accumulator which enables processing of long-word data. *1 : f 2 mc stands for fujitsu flexible microcontroller, a registered trademark of fujitsu limited. *2 : purchase of fujitsu i 2 c components conveys a license under the philips i 2 c patent rights to use, these components in an i 2 c system provided that the system conforms to the i 2 c standard specification as defined by philips. package 144-pin plastic lqfp (fpt-144p-m12)
mb90378 series 2 features clock ? embedded pll clock multiplication circuit ? operating clock (pll clock) can selected from divided-by-2 of oscillation or one to four times the oscillation (at oscillation of 4 mhz to 20 mhz) ? minimum instruction execution time of 50 ns (at oscillation of 5 mhz, four times the pll clock, operation at v cc of 3.3 v) cpu addressing space of 16 mbytes internal 24-bit addressing instruction set optimized for controller applications ? rich data types (bit, byte, word, long word) ? rich addressing mode (23 types) ? high code efficiency ? enhanced precision calculation realized by the 32-bit accumulator instruction set designed for high level language (c) and multi-task operations ? adoption of system stack pointer ? enhanced pointer indirect instructions ? barrel shift instructions program patch function (2 address pointer) improved execution speed 4-byte instruction queue powerful interrupt function ? priority level programmable : 8 levels ? 32 factors of stronger interrupt function automatic data transmission function independent of cpu operation ? extended intelligent i/o service function (ei 2 os) ? maximum 16 channels low-power consumption (standby) mode ? sleep mode (mode in which cpu operating clock is stopped) ? timebase timer mode (mode in which operations other than timebase timer and watch timer are stopped) ? stop mode (mode in which all oscillations are stopped) ? cpu intermittent operation mode ? watch mode dual operation flash upper and lower banks of flash memory can be used to execute erase/program and read operation concurrently (MB90F378) package lqfp-144 (fpt-144p-m12 : 0.4 mm pitch) process cmos technology mb90378 series 3 product lineup (continued) part number parameter MB90F378mb90v378 classificationflash type rom rom size 128 kbytes (112 kbytes 16 kbytes) dual operation ram size6 kbytes15.6 kbytes cpu function number of instruction : 351 minimum execution time : 50 ns/5 mhz (pll x 4) addressing mode : 23 data bit length : 1, 8, 16 bits maximum memory space : 16 mbytes i/o port i/o port (nch) : 25 i/o port (cmos) : 68 i/o port (cmos with pull-up control) : 32 total : 125 16-bit reload timer reload timer : 6 channels reload mode, single-shot mode or event count mode selectable 8/16-bit ppg timerppg timer : 2 channels (8-bit mode, 4 channels) 16-bit ppg timer ppg timer : 3 channels pwm mode or single-shot mode selectable bit decoderbit decoder : 1 channel parity generator parity generator : 1 channel selectable odd/even parity ps/2 interface ps/2 interface : 3 channels 4 selectable sampling clocks lpc interface lpc bus interface : 1 channel universal peripheral interface : 4 channels ga20 output control : for upi ch 0 only data buffer array : 80 bytes serial irq controller serial irq request : 6 channels lpc clock monitor/control uart with full-duplex double buffer (variable data length) clock asynchronized or clock synchronized transmission (with start and stop bits) can be selectively used i 2 c i 2 c (smbus compliant) : 1 channel support i 2 c bus of philips and the smbus proposed by intel i 2 c bus selectable packet error check timeout detection function multi-address i 2 c multi-address i 2 c (smbus compliant) : 1 channel support i 2 c bus of philips and the smbus proposed by intel i 2 c bus selectable packet error check timeout detection function 6 addresses support alert function mb90378 series 4 (continued) * : varies with conditions such as the operating frequency (see electrical characteristics ). assurance for the mb90v378 is given only for operation with a tool at power supply voltage of 2.7 v to 3.6 v, an operating temperature of 0 c to 25 c, and an operating frequency of 1 mhz to 20 mhz. package and corresponding products : available x : not available note : for more information about each package, see package dimensions . differences among products memory size in evaluation with an evaluation product, note the difference between the evaluation product and the product actually used. the following items must be taken into consideration. ? the mb90v378 does not have an internal rom, however, operations equivalent to chips with an internal rom can be evaluated by using a dedicated development tool, enabling selection of rom size by settings of the development tool. ? in the mb90v378, images from ff4000 h to ffffff h are mapped to bank 00, and ff0000 h to ff3fff h are mapped to bank ff only. (this setting can be changed by the development tool configuration.) ? in the MB90F378, images from ff4000 h to ffffff h are mapped to bank 00, and ff0000 h to ff3fff h are mapped to bank ff only. part number parameter MB90F378mb90v378 bridge circuitthree bus connection routes can be switched by i 2 c/multi-address i 2 c dtp/external interrupt 8 independent channels selectable causes : rise/fall edge, fall edge, l level or h level extended external interrupt 8 multiplex channels 2 set selectable causes : rise/fall edge, fall edge, rise edge or l level key-on wake-up interrupt 8 independent channels causes : l level 8/10-bit a/d converter 8/10-bit resolution : 12 channels conversion time : less than 4.2 s (20 mhz internal clock) 8-bit d/a converter8-bit resolution : 2 channels lcd controller/driver up to 9 seg 4 com selectable lcd output or cmos i/o port low-power consumptionstop mode/sleep mode/cpu intermittent operation mode/watch mode process cmos package lqfp-144 (fpt-144p-m12 : 0.4 mm pitch) pga299 operating voltage2.7 v to 3.6 v at 20 mhz* packageMB90F378mb90v378 fpt-144p-m12 x pga299x mb90378 series 5 pin assignment 1 p40/psck0 2 36 pb2/eei10 p41/psda0 3 p42/psck1 4 p43/psda1 5 p44/psck2 6 p45/psda2 7 p46/clkrun 8 p47/serirq 9 p50/ga20 10 p51/lframe 11 p52/lreset 12 p53/lck 13 p54/lad0 14 p55/lad1 15 p56/lad2 16 p57/lad3 17 rst 18 v cc 19 v ss x0a20 21 x1a 22 pa0/eei0 23 pa1/eei1 24 pa2/eei2 25 pa3/eei3 26 pa4/eei4 27 pa5/eei5 28 pa6/eei6 29 pa7/eei7 30 p83/int6 31 p84/int7 32 p85 33 p86 34 pb0/eei8 35 pb1/eei9 73p82/alert 108p77/ppg1 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 pe0/tin1/seg0 pe1/to1/seg1 pe2/tin2/seg2 pe3/to2/seg3 pe4/tin3/seg4 pe5/to3/seg5 pe6/tin4/seg6 pe7/to4/seg7 pf0/tin5/seg8 * pf1/to5/com0 * pf2/tin6/com1 * pf3/to6/com2 * pf4/com3* pf5/v1* pf6/v2* pf7/v3* v cc v ss pd7/ppg3 p60/int0 p61/int1 p62/int2 p63/int3 p64/int4 p65/int5 p66/uck1 p67/uo1 p70/ui1 p71/uck2 p72/uo2 p73/ui2 p74/uck3 p75/uo3 p76/ui3 lqfp-144 * : heavy current pins (fpt-144p-m12) top view mb90378 series 6 pin description (continued) pin no. pin name i/o circuit pin status during reset function lqfp-144 128,129x0,x1aoscillatingmain oscillation i/o pins. 20,21x0a,x1aaoscillatingsub-clock oscillation i/o pins. 17rst breset inputexternal reset input pin. 58, 57, 56 md0 to md2 cmode input input pin for operation mode specification. connect this pin directly to vcc or vss. 109 to 116 p00 to p07 d port input general-purpose i/o ports. ksi0 to ksi7 can be used as key-on wake-up interrupt input ch 0 to 7. input is enabled when 1 is set in eicr : en0 to 7 in standby mode. 117 to 124p10 to p17egeneral-purpose i/o ports. 125, 130 to 136 p20 to p27egeneral-purpose i/o ports. 137, 138 p30, p31 e general-purpose i/o ports. pg00, pg01 8/16-bit ppg timer output pins. 8-bit x 2 channels mode use : event output from pg00/pg01 16-bit x 1channel mode use : event output from pg00 139, 140 p32, p33 e general-purpose i/o ports. pg10, pg11 8/16-bit ppg timer output pins. 8-bit x 2 channels mode use : event output from pg10/pg11. 16-bit x 1channel mode use : event output from pg10. 141 to 143p34 to p36egeneral-purpose i/o ports. 144 p37 e general-purpose i/o port. adtgexternal trigger input pin (adtg) for the a/d converter. 1 p40 f general-purpose nch open-drain i/o port. psck0 serial clock i/o pin for ps/2 interface ch 0. this function is selected when ps/2 interface ch 0 is enabled. 2 p41 f general-purpose nch open-drain i/o port. psda0 serial data i/o pin for ps/2 interface ch 0. this function is selected when ps/2 interface ch 0 is enabled. 3 p42 f general-purpose nch open-drain i/o port. psck1 serial clock i/o pin for ps/2 interface ch 1. this function is selected when ps/2 interface ch 1 is enabled. 4 p43 f general-purpose nch open-drain i/o port. psda1 serial data i/o pin for ps/2 interface ch 1. this function is selected when ps/2 interface ch 1 is enabled. mb90378 series 7 (continued) pin no. pin name i/o circuit pin status during reset function lqfp-144 5 p44 f port input general-purpose nch open-drain i/o port. psck2 serial clock i/o pin for ps/2 interface ch 2. this function is selected when ps/2 interface ch 2 is enabled. 6 p45 f general-purpose nch open-drain i/o port. psda2 serial data i/o pin for ps/2 interface ch 2. this function is selected when ps/2 interface ch 2 is enabled. 7 p46 g general-purpose nch open-drain i/o port. clkrun lpc clock status / restart request i/o pin for serial irq controller. this function is selected when serial irq and lpc clock restart request is enabled. 8 p47 h general-purpose i/o port. serirq serial irq data i/o pin for serial irq controller. this function is selected when serial irq is enabled. 9 p50 j general-purpose nch open-drain i/o port. ga20 ga20 output for lpc interface. this function is selected when ga20 function is enabled. 10 p51 h general-purpose i/o port. lframe lframe input for lpc interface. this function is selected when lpc interface is enabled. 11 p52 h general-purpose i/o port. lreset reset input for lpc interface. this function is selected when lpc interface is enabled. 12 p53 h general-purpose i/o port. lck clock input for lpc interface. this function is selected when lpc interface is enabled. 13 to 16 p54 to p57 h general-purpose i/o ports. lad0 to lad3 address/data i/o for lpc interface. this function is selected when lpc interface is enabled. 93 to 98 p60 to p65 i general-purpose i/o ports. int0 to int5 can be used as dtp/external interrupt request input ch 0 to 5. input is enabled when 1 is set in enir: en0 to 5 in standby mode. 99 p66 i general-purpose i/o port. uck1 serial clock i/o pin for uart ch 1. this function is enabled when uart ch 1 enables clock output. mb90378 series 8 (continued) pin no. pin name i/o circuit pin status during reset function lqfp-144 100 p67 i port input general-purpose i/o port. uo1 serial data output pin for uart ch 1. this function is enabled when uart ch 1 enables data output. 101 p70 i general-purpose i/o port. ui1 serial data input pin for uart ch 1. while uart ch 1 is operating for input, the input of this pin is used as required and must not be used for any other input. 102 p71 i general-purpose i/o port. uck2 serial clock i/o pin for uart ch 2. this function is enabled when uart ch 2 enables clock output. 103 p72 i general-purpose i/o port. uo2 serial data output pin for uart ch 2. this function is enabled when uart ch 2 enables data output. 104 p73 i general-purpose i/o port. ui2 serial data input pin for uart ch 2. while uart ch 2 is operating for input, the input of this pin is used as required and must not be used for any other input. 105 p74 i general-purpose i/o port. uck3 serial clock i/o pin for uart ch 3. this function is enabled when uart ch 3 enables clock output. 106 p75 i general-purpose i/o port. uo3 serial data output pin for uart ch 3. this function is enabled when uart ch 3 enables data output. 107 p76 i general-purpose i/o port. ui3 serial data input pin for uart ch 3. while uart ch 3 is operating for input, the input of this pin is used as required and must not be used for any other input. 108 p77 i general-purpose i/o port. ppg1 output pin for ppg ch 1.this function is enabled when ppg ch 1 output is enabled. 71 p80 t general-purpose nch open-drain i/o port. scl1serial clock i/o pin for multi-address i 2 c. 72 p81 t general-purpose nch open-drain i/o port. sda1serial data i/o pin for multi-address i 2 c. mb90378 series 9 (continued) pin no. pin name i/o circuit pin status during reset function lqfp-144 73 p82 j port input general-purpose nch open-drain i/o port. alertalert output pin for multi-address i 2 c. 30, 31 p83, p84 i general-purpose i/o ports. int6, int7 can be used as dtp/external interrupt request input ch6, 7. input is enabled when 1 is set in enir: en6, 7 in standby mode. 32p85igeneral-purpose i/o port. 33p86igeneral-purpose i/o port. 65 p90 t general-purpose nch open-drain i/o port. scl2serial clock i/o pin for bridge circuit. 66 p91 t general-purpose nch open-drain i/o port. sda2serial data i/o pin for bridge circuit. 67 p92 t general-purpose nch open-drain i/o port. scl3serial clock i/o pin for bridge circuit. 68 p93 t general-purpose nch open-drain i/o port. sda3serial data i/o pin for bridge circuit. 69 p94 t general-purpose nch open-drain i/o port. scl4serial clock i/o pin for bridge circuit. 70 p95 t general-purpose nch open-drain i/o port. sda4serial data i/o pin for bridge circuit. 22 to 29 pa0 to pa7 i general-purpose i/o ports. eei0 to eei7 external irq input pin for extend external interrupt request ch0 to 7. when irq detect, prepare to the cpu interrupt. (multiplex) 34 to 41 pb0 to pb7 i general-purpose i/o ports. eei8 to eei15 external irq input pin for extend external interrupt request ch8 to 15. when irq detect, prepare to the cpu interrupt. (multiplex) 45 to 52 pc0 to pc7 m a/d input general-purpose i/o ports. an0 to an7 a/d converter analog input pin 0 to 7. this function is enabled when the analog input specification is enabled (ader1). 53, 59 to 61 pd0 to pd3 m general-purpose i/o ports. an8 to an11 a/d converter analog input pin 8 to 11. this function is enabled when the analog input specification is enabled (ader2). mb90378 series 10 (continued) pin no. pin name i/o circuit pin status during reset function lqfp-144 62, 63 pd4, pd5 n port input general-purpose i/o ports. da1, da2 d/a converter analog output 1, 2. this function is selected when d/a converted is enabled. 64, 92 pd6, pd7 h general-purpose i/o ports. ppg2, ppg3 output pin for ppg ch 2, 3. this function is selected when ppg ch 2, 3 output is enabled. 74 pe0 o general-purpose i/o port. seg0 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. tin1external clock input pin for reload timer 1. 75 pe1 o general-purpose i/o port. seg1 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. to1event output pin for reload timer 1. 76 pe2 o general-purpose i/o port. seg2 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. tin2external clock input pin for reload timer 2. 77 pe3 o general-purpose i/o port. seg3 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. to2event output pin for reload timer 2. 78 pe4 o general-purpose i/o port. seg4 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. tin3external clock input pin for reload timer 3. 79 pe5 o general-purpose i/o port. seg5 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. to3event output pin for reload timer 3. 80 pe6 o general-purpose i/o port. seg6 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. tin4external clock input pin for reload timer 4. mb90378 series 11 (continued) pin no. pin name i/o circuit pin status during reset function lqfp-144 81 pe7 o port input general-purpose i/o port. seg7 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. to4event output pin for reload timer 4. 82 pf0 p general-purpose nch open-drain i/o port. seg8 segment output pin for lcd controller/driver. this function is selected when lcd segment output is enabled. tin5external clock input pin for reload timer 5. 83 pf1 p general-purpose nch open-drain i/o port. com0 com output pin for lcd controller/driver. this function is select- ed when lcd com output is enabled. to5event output pin for reload timer 5. 84 pf2 p general-purpose nch open-drain i/o port. com1 com output pin for lcd controller/driver. this function is select- ed when lcd com output is enabled. tin6external clock input pin for reload timer 6. 85 pf3 p general-purpose nch open-drain i/o port. com2 com output pin for lcd controller/driver. this function is select- ed when lcd com output is enabled. to6event output pin for reload timer 6. 86 pf4 p general-purpose nch open-drain i/o port. com3 com output pin for lcd controller/driver. this function is select- ed when lcd com output is enabled. 87 to 89 pf5 to pf7 qpower input general-purpose nch open-drain i/o ports. v1 to v3 power input pin for lcd controller/driver. this function is select- ed when external voltage divider is enabled. 42av cc r power input vcc power input pin for analog circuits. 43avrs vref+ input pin for the a/d converter. this voltage must not exceed vcc. vref- is fixed to av ss . 44av ss rvss power input pin for analog circuits. 19,55,91, 127 v ss C source power input power (0 v) input pin. 18,54,90, 126 v cc C power (3.3 v) input pin. mb90378 series 12 i/o circuit type (continued) typecircuitremarks a main/sub clock (main/sub clock crystal oscillator) ? at an oscillation feedback resistor of approximately 1 m b ? cmos hysteresis input ? pull-up resistor approximately 50 k c ? cmos hysteresis input d ? cmos output ? cmos hysteresis input ? selectable pull-up resistor approximately 50 k ? i ol 4 ma e ? cmos output ? cmos input ? selectable pull-up resistor approximately 50 k ? i ol 4 ma f ? nch open-drain output ? cmos hysteresis input ? i ol 4 ma ? 5 v tolerant xout standby mode control x1/x1a x0/x0a nchpch nch pch r cmos hysteresis input cmos hysteresis inp ut r pch pch nch pout nout pull-up control cmos hysteresis input standby mode control r pch pch nch pout nout pull-up control cmos input standby mode control nch nch nout cmos hysteresis input standby mode control mb90378 series 13 (continued) typecircuitremarks g ? nch open-drain output ? cmos input ? i ol 4 ma h ? cmos output ? cmos input ? i ol 4 ma i ? cmos output ? cmos hysteresis input ? i ol 4 ma j ? nch open-drain output ? cmos input ? i ol 4 ma ? 5 v tolerant m ? cmos output ? cmos input ? a/d analog input ? i ol 4 ma pch nch nout cmos input standby mode control pch nch nout cmos input standby mode control pout pch nch nout cmos hysteresis input standby mode control pout cmos input standby mode control nout nch nch pch nch nout cmos input standby mode control pout analog input mb90378 series 14 (continued) typecircuitremarks n ? cmos output ? cmos input ? d/a analog output ? i ol 4 ma o ? cmos output ? cmos hysteresis input ? segment output ? i ol 4 ma p ? nch open-drain output ? cmos hysteresis input ? segment output ? i ol 12 ma q ? nch open-drain output ? cmos hysteresis input ? lcd driving power supply ? i ol 12 ma pch nch nout cmos input standby mode control pout analog input pch nch nout cmos hysteresis input standby mode control pout segment output r nch nch nout cmos hysteresis input standby mode control segment output r nch nch nout cmos hysteresis input standby mode control lcd driving power supply mb90378 series 15 (continued) typecircuitremarks r ? power supply input protection circuit s ? a/d converter reference voltage (avr) input pin with protection circuit t ? nch open-drain output ? cmos input ? i ol 4 ma ? 5 v tolerant in pch nch in pch nch analog input enable analog input enable cmos input standby mode control nout nch nch mb90378 series 16 handling devices 1.be sure that the maximum rated voltage is not exceeded (latch-up prevention). a latch-up may occur on a cmos ic if a voltage higher than v cc or lower than v ss is applied to an input or output pin other than medium-to-high voltage pins. a latch-up may also occur if a voltage higher than the rating is applied between v cc pin and v ss pin. a latch-up causes a rapid increase in the power supply current, which can result in thermal damage to an element. take utmost care that the maximum rated voltage is not exceeded. when turning the power on or off to analog circuits, be sure that the analog supply voltages (av cc , avr) and analog input voltage do not exceed the digital supply voltage (v cc ). 2.stabilize the supply voltages even within the operation guarantee range of the v cc supply voltage, a malfunction can be caused if the supply voltage undergoes a rapid change. for voltage stabilization guidelines, the v cc ripple fluctuations (p-p value) at commercial frequencies (50 hz to 60 hz) should be suppressed to "10%" or less of the reference v cc value. during a momentary change such as when switching a supply voltage, voltage fluctuations should also be suppressed so that the "transient fluctuation rate" is 0.1 v/ms or less. 3.power-on to prevent a malfunction in the built-in voltage drop circuit, secure "50 s (between 0.2 v and 1.8 v)" or more for the voltage rise time during power-on. 4.treatment of unused input pins an unused input pin may cause a malfunction if it is left open. every unused input pin should be pulled up or down. 5.treatment of a/d converter, and d/a converter power pin when the a/d converter, d/a converter and comparator is not used, connect the pins as follows: av cc v cc , av ss avr v ss . 6. notes on external clock when an external clock is used, the oscillation stabilization wait time is required at power-on reset or at cancel- lation of sub-clock mode or stop mode. as shown in diagram below, when an external clock is used, connect only the x0 pin and leave the x1 pin open. open x1 x0 mb90378 series mb90378 series 17 7.power supply pins when a device has two or more v cc or v ss pins, the pins that should have equal potential are connected within the device in order to prevent a latch-up or other malfunction. to reduce extraneous emission, to prevent a malfunction of the strobe signal due to an increase in the group level, and to maintain the local output current rating, connect all these power supply pins to an external power supply and ground them. the current source should be connected to the v cc and v ss pins of the device with minimum impedance. it is recommended that a bypass capacitor of about 0.1 f be connected near the terminals between v cc and v ss . 8.analog power-on sequence of a/d converter and d/a converter the power to the a/d converter and d/a converter (av cc , avr) and analog inputs (an0 to an11) must be turned on after the power to the digital circuits (v cc ) is turned on. when turning off the power, turn off the power to the digital circuits (v cc ) after turning off the power to the a/d converter, d/a converter and analog inputs. when the power is turned on or off, avr should not exceed av cc . also, when a pin that is used for a/d analog input is also used as an input port, the input voltage should not exceed av cc . (the power to the analog circuits and the power to the digital circuits can be simultaneously turned on or off.) mb90378 series 18 block diagram other pins clock control circuit x0, x0a x1, x1a rst 8 8 8 8 p00/ksi0 to p07/ksi7 p10 to p17 p20 to p27 p30/pg00 to p33/pg11 p34 to p36 p37/adtg p40/psck0 p41/psda0 p42/psck1 p43/psda1 p44/psck2 p45/psda2 p47/serirq p46/clkrun p50/ga20 p51/lframe p52/lreset p53/lck p54/lad0 p55/lad1 p56/lad2 p57/lad3 6 p60/int0 to p65/int5 p66/uck1 p67/uo1 p70/ui1 p71/uck2 p72/uo2 p73/ui2 p74/uck3 p75/uo3 p76/ui3 p77/ppg1 8 6 6 2 7 6 3 3 6 6 8 8 8 8 2 12 2 2 6 6 16 p80/scl1 p81/sda1 p82/alert p90/scl2 p91/sda2 p92/scl3 p93/sda3 p94/scl4 p95/sda4 pa0/eei0 to pa7/eei7 pb0/eei8 to pb7/eei15 p83/int6 p84/int7 p85 p86 pc0/an0 to pc7/an7 pd0/an8 to pd3/an11 pd4/da1 pd5/da2 pd6/ppg2 pd7/ppg3 pe0/tin1/seg0 pe1/to1/seg1 pe2/tin2/seg2 pe3/to2/seg3 pe4/tin3/seg4 pe5/to3/seg5 pe6/tin4/seg6 pe7/to4/seg7 pf0/seg8/tin5* pf1/com0/to5* pf2/com1/tin6* pf3/com2/to6* pf4/com3* pf5/v1* to pf7/v3* reset circuit (watchdog timer) interrupt controller timebase timer cmos i/o port 0, 1, 2, 3* key-on wake-up interrupt 8/16-bit ppg timer (ch1, ch2) nch open-drain i/o port 4 (p47 is cmos i/o port) serial irq (6 channels) lpc interface ga20 control upi (ch0, ch1, ch2, ch3) nch open-drain i/o p50 cmos i/o p51 to p57 dtp/external interrupt ch0, 1, 2, 3, 4, 5 uart (ch1, ch2, ch3) 16-bit ppg (ch1) cmos i/o port 6, 7 ram 6kb flash 128 kb mirroring flash security cpu f 2 mc-16lx family core v ss x 4, v cc x4, md0 to md2, av cc , av ss , avr 3ch ps/2 interface delayed interrupt generator nch open-drain i/o port 8, 9 i 2 c bus (multi-address) i 2 c bus bridge circuit cmos i/o port a, b, 8 extend external interrupt 1 (8 channels) extend external interrupt 2 (8 channels) dtp/external interrupt (ch6, ch7) 8/10-bit a/d converter (12 channels) 8-bit d/a converter (2 channels) 16-bit ppg (ch2, ch3) cmos i/o port c, d cmos i/o port e nch open-drain i/o port f 16-bit reload timer (ch1, ch2, ch3, ch4, ch5, ch6) lcd controller/driver (9seg x 4com) * : p00 to p07, p10 to p17, p20 to p27, p30 to p37 : with resistors that can be used as input pull-up resistors. pf0 to pf7 : high current pins mb90378 series 19 memory map * : the mb90v378 does not contain rom. assume that the development tool uses these area for its rom decode areas. notes : if single-chip mode (without rom mirroring function) is selected, see chapter 32, "rom mirroring function selection module" of the mb90378 series h/w manual. rom data in the ff bank can be seen as an image in the higher 00 bank to validate the small model c compiler. because addresses of the 16 low-order bits in the ff bank are the same, the table in rom can be referenced without the "far" specification. for example, when 00c000 h is accessed, the contents of rom at ffc000 h are actually accessed. the rom area in the ff bank exceeds 48 kbytes, and all areas cannot be seen as images in the 00 bank. because rom data from ff4000 h to ffffff h is seen as an image at 004000 h to 00ffff h , the rom data table should be stored in the area from ff4000 h to ffffff h . modeladdress #1address #2address #3 MB90F378fe0000 h 004000 h 001900 h mb90v378fe0000 h *004000 h *003f80 h rom area rom area (ff bank image) peripheral area ram area register peripheral area single-chip mode (with rom mirroring function) ffffff h address #1 fc0000 h 010000 h address #2 004000 h 003f80 h address #3 000100 h 0000f8 h 000000 h : internal access memo ry : access not allowed mb90378 series 20 f 2 mc-16lx cpu programming model ? dedicated registers ? general-purpose registers ahal usp ssp ps pc dpr pcb dtb usb ssb adb 8-bit 16-bit 32-bit accumulator (a) user stack pointer (usp) system stack pointer (ssp) processor status (ps) program counter (pc) direct page register (dpr) program bank register(pcb) data bank register (dtb) user stack bank register (usb) system stack bank register (ssb) additional data bank register (adb ) cpu dedicated register accumulator user stack pointer system stack pointer processor status program counter direct page register program bank register data bank register user stack bank register system stack bank register additional data bank register i n t e r n a l b u s ram ram general-purpose register mb90378 series 21 ? processor status (ps) ps default value default value default value default value 151312870 000 ilmrp 00000 ccr -01xxxxx 76543210 -istnzvc -01xxxxx b4b3b2b1b0 00000 000 ilm2ilm1ilm0 : ccr : rp : ilm - : not used x : undefined mb90378 series 22 i/o map (continued) addressabbreviationregister byte access word access resource nameinitial value 000000 h pdr0port 0 data registerr/wr/wport 0xxxxxxxx b 000001 h pdr1port 1 data registerr/wr/wport 1xxxxxxxx b 000002 h pdr2port 2 data registerr/wr/wport 2xxxxxxxx b 000003 h pdr3port 3 data registerr/wr/wport 3xxxxxxxx b 000004 h pdr4port 4 data registerr/wr/wport 4x1111111 b 000005 h pdr5port 5 data registerr/wr/wport 5xxxxxxx1 b 000006 h pdr6port 6 data registerr/wr/wport 6xxxxxxxx b 000007 h pdr7port 7 data registerr/wr/wport 7xxxxxxxx b 000008 h pdr8port 8 data registerr/wr/wport 8-xxxx111 b 000009 h pdr9port 9 data registerr/wr/wport 9--111111 b 00000a h pdraport a data registerr/wr/wport axxxxxxxx b 00000b h pdrbport b data registerr/wr/wport bxxxxxxxx b 00000c h pdrcport c data registerr/wr/wport cxxxxxxxx b 00000d h pdrdport d data registerr/wr/wport dxxxxxxxx b 00000e h pdreport e data registerr/wr/wport exxxxxxxx b 00000f h pdrfport f data registerr/wr/wport f11111111 b 000010 h ddr0port 0 direction registerr/wr/wport 000000000 b 000011 h ddr1port 1 direction registerr/wr/wport 100000000 b 000012 h ddr2port 2 direction registerr/wr/wport 200000000 b 000013 h ddr3port 3 direction registerr/wr/wport 300000000 b 000014 h ddr4port 4 direction registerr/wr/wport 40------- b 000015 h ddr5port 5 direction registerr/wr/wport 50000000- b 000016 h ddr6port 6 direction registerr/wr/wport 600000000 b 000017 h ddr7port 7 direction registerr/wr/wport 700000000 b 000018 h pgdrparity generator data registerr/wr/w parity generator xxxxxxxx b 000019 h pgcsr parity generator control status register r/wr/wx------0 b 00001a h ddraport a direction registerr/wr/wport a00000000 b 00001b h ddrbport b direction registerr/wr/wport b00000000 b 00001c h ddrcport c direction registerr/wr/wport c00000000 b 00001d h ddrdport d direction registerr/wr/wport d00000000 b 00001e h ddreport e direction registerr/wr/wport e00000000 b 00001f h ddr8port 8 direction registerr/wr/wport 8-0000--- b mb90378 series 23 (continued) addressabbreviationregister byte access word access resource nameinitial value 000020 h smr1serial mode register 1r/wr/w uart1 00000-00 b 000021 h scr1serial control register 1r/wr/w00000100 b 000022 h sidr1/ sodr1 input data register 1/ output data register 1 r/wr/wxxxxxxxx b 000023 h ssr1serial status register 1r/wr/w00001000 b 000024 h m2cr1mode 2 control register 1r/wr/w----1000 b 000025 h cdcr1clock division control register 1r/wr/w communication prescaler 1 00--0000 b 000026 h enirinterrupt/dtp enable registerr/wr/w dtp/external interrupt 00000000 b 000027 h eirrinterrupt/dtp cause registerr/wr/wxxxxxxxx b 000028 h elvrrequest level setting register r/wr/w00000000 b 000029 h r/wr/w00000000 b 00002a h ader1analog input enable register 1r/wr/wport c, a/d11111111 b 00002b h ader2analog input enable register 2r/wr/wport d, a/d----1111 b 00002c h brsrbridge circuit selection registerr/wr/wbridge circuit--000000 b 00002d h adc0a/d control registerr/wr/w 8/10-bit a/d converter 00000000 b 00002e h adcr0 a/d data register rrxxxxxxxx b 00002f h adcr1r/wr/w00000-xx b 000030 h adcs0 a/d control status register r/wr/w00-------- b 000031 h adcs1r/wr/w00000000 b 000032 h sicrlserial interrupt request registerr/wr/w serial irq 00000000 b 000033 h sicrhserial interrupt control registerr/wr/w00000000 b 000034 h sifr1 serial interrupt frame number register 1 r/wr/w--000000 b 000035 h sifr2 serial interrupt frame number register 2 r/wr/w--000000 b 000036 h sifr3 serial interrupt frame number register 3 r/wr/w--000000 b 000037 h sifr4 serial interrupt frame number register 4 r/wr/w--000000 b 000038 h pdcrl1 ppg1 down counter register r 16-bit ppg timer (ch1) 11111111 b 000039 h pdcrh1 r11111111 b 00003a h pcsrl1 ppg1 period setting register wxxxxxxxx b 00003b h pcsrh1 wxxxxxxxx b 00003c h pdutl1 ppg1 duty setting register wxxxxxxxx b 00003d h pduth1 wxxxxxxxx b 00003e h pcntl1 ppg1 control status register r/wr/w--000000 b 00003f h pcnth1r/wr/w00000000 b mb90378 series 24 (continued) addressabbreviationregister byte access word access resource nameinitial value 000040 h pdcrl2 ppg2 down counter register r 16-bit ppg timer (ch2) 11111111 b 000041 h pdcrh2 r11111111 b 000042 h pcsrl2 ppg2 period setting register wxxxxxxxx b 000043 h pcsrh2 wxxxxxxxx b 000044 h pdutl2 ppg2 duty setting register wxxxxxxxx b 000045 h pduth2 wxxxxxxxx b 000046 h pcntl2 ppg2 control status register r/wr/w--000000 b 000047 h pcnth2r/wr/w00000000 b 000048 h pdcrl3 ppg3 down counter register r 16-bit ppg timer (ch3) 11111111 b 000049 h pdcrh3 r11111111 b 00004a h pcsrl3 ppg3 period setting register wxxxxxxxx b 00004b h pcsrh3 wxxxxxxxx b 00004c h pdutl3 ppg3 duty setting register wxxxxxxxx b 00004d h pduth3 wxxxxxxxx b 00004e h pcntl3 ppg3 control status register r/wr/w--000000 b 00004f h pcnth3r/wr/w00000000 b 000050 h pscr0ps/2 interface control register 0r/wr/w 3-channel ps/2 interface 0--00000 b 000051 h pssr0ps/2 interface status register 0r/wr/w00000000 b 000052 h pscr1ps/2 interface control register 1r/wr/w0--00000 b 000053 h pssr1ps/2 interface status register 1r/wr/w00000000 b 000054 h pscr2ps/2 interface control register 2r/wr/w0--00000 b 000055 h pssr2ps/2 interface status register 2r/wr/w00000000 b 000056 h psdr0ps/2 interface data register 0r/wr/w00000000 b 000057 h psdr1ps/2 interface data register 1r/wr/w00000000 b 000058 h psdr2ps/2 interface data register 2r/wr/w00000000 b 000059 h psmrps/2 interface mode registerr/wr/w----0000 b 00005a h dat0d/a converter data register 0r/wr/w 8-bit d/a converter xxxxxxxx b 00005b h dat1d/a converter data register 1r/wr/wxxxxxxxx b 00005c h dacr0d/a control register 0r/wr/w-------0 b 00005d h dacr1d/a control register 1r/wr/w-------0 b mb90378 series 25 (continued) addressabbreviationregister byte access word access resource nameinitial value 00005e h upal1upi1 address register (lower)r/wr/w lpc interface xxxxxxxx b 00005f h upah1upi1 address register (upper)r/wr/wxxxxxxxx b 000060 h upal2upi2 address register (lower)r/wr/wxxxxxxxx b 000061 h upah2upi2 address register (upper)r/wr/wxxxxxxxx b 000062 h upal3upi3 address register (lower)r/wr/wxxxxxxxx b 000063 h upah3upi3 address register (upper)r/wr/wxxxxxxxx b 000064 h upclupi control register (lower)r/wr/w00000000 b 000065 h upchupi control register (upper)r/wr/w-000-000 b 000066 h updi0/ updo0 upi0 data input register/ data output register r/wr/wxxxxxxxx b 000067 h ups0upi0 status registerr/wr/w00000000 b 000068 h updi1/ updo1 upi1 data input register/ data output register r/wr/wxxxxxxxx b 000069 h ups1upi1 status registerr/wr/w00000000 b 00006a h updi2/ updo2 upi2 data input register/ data output register r/wr/wxxxxxxxx b 00006b h ups2upi2 status registerr/wr/w00000000 b 00006c h updi3/ updo3 upi3 data input register/ data output register r/wr/wxxxxxxxx b 00006d h ups3upi3 status registerr/wr/w00000000 b 00006e h lcrlpc control registerr/wr/w-----000 b 00006f h romm rom mirroring function selection register ww rom mirroring function -------1 b 000070 h tmcsrl1 timer control status register ch1 (lower) r/wr/w 16-bit reload timer (ch1) 00000000 b 000071 h tmcsrh1 timer control status register ch1 (upper) r/wr/w----0000 b 000072 h tmr1/ tmrd1 16-bit timer/reload register ch1 r/wxxxxxxxx b 000073 h r/wxxxxxxxx b 000074 h tmcsrl2 timer control status register ch2 (lower) r/wr/w 16-bit reload timer (ch2) 00000000 b 000075 h tmcsrh2 timer control status register ch2 (upper) r/wr/w----0000 b 000076 h tmr2/ tmrd2 16-bit timer/reload register ch2 r/wxxxxxxxx b 000077 h r/wxxxxxxxx b mb90378 series 26 (continued) addressabbreviationregister byte access word access resource nameinitial value 000078 h tmcsrl3 timer control status register ch3 (lower) r/wr/w 16-bit reload timer (ch3) 00000000 b 000079 h tmcsrh3 timer control status register ch3 (upper) r/wr/w----0000 b 00007a h tmr3/ tmrd3 16-bit timer/reload register ch3 r/wxxxxxxxx b 00007b h r/wxxxxxxxx b 00007c h tmcsrl4 timer control status register ch4 (lower) r/wr/w 16-bit reload timer (ch4) 00000000 b 00007d h tmcsrh4 timer control status register ch4 (upper) r/wr/w----0000 b 00007e h tmr4/ tmrd4 16-bit timer/reload register ch4 r/wxxxxxxxx b 00007f h r/wxxxxxxxx b 000080 h ibcrli 2 c bus control register (lower)r/wr/w i 2 c ----0000 b 000081 h ibcrhi 2 c bus control register (upper)r/wr/w00000000 b 000082 h ibsrli 2 c bus status register (lower)rr00000000 b 000083 h ibsrhi 2 c bus status register (upper)r/wr/w--000000 b 000084 h idari 2 c data registerr/wr/wxxxxxxxx b 000085 h iadri 2 c address registerr/wr/w-xxxxxxx b 000086 h iccri 2 c clock control registerr/wr/w0-000000 b 000087 h itcri 2 c timeout control registerr/wr/w-0-00000 b 000088 h itoci 2 c timeout clock registerr/wr/w00000000 b 000089 h itodi 2 c timeout data registerr/wr/w00000000 b 00008a h istoi 2 c slave timeout registerr/wr/w00000000 b 00008b h imtoi 2 c master timeout registerr/wr/w00000000 b 00008c h rdr0 port 0 pull-up resistor setting register r/wr/wport 000000000 b 00008d h rdr1 port 1 pull-up resistor setting register r/wr/wport 100000000 b 00008e h rdr2 port 2 pull-up resistor setting register r/wr/wport 200000000 b 00008f h rdr3 port 3 pull-up resistor setting register r/wr/wport 300000000 b 000090 h to 00009d h prohibited area 00009e h pacsr program address detect control status register r/wr/w address match detection 00000000 b 00009f h dirr delayed interrupt cause/ clear register r/wr/w delayed interrupt -------0 b mb90378 series 27 (continued) addressabbreviationregister byte access word access resource nameinitial value 0000a0 h lpmcr low-power consumption mode register r/wr/w low-power consumption control register 00011000 b 0000a1 h ckscrclock selection registerr/wr/w11111100 b 0000a2 h , 0000a3 h prohibited area 0000a4 h ckmc clock modulation control register r/wr/w clock modulation -------0 b 0000a5 h to 0000a7 h prohibited area 0000a8 h wdtcwatchdog control registerr/wr/wwatchdog timerx-xxx111 b 0000a9 h tbtctimebase timer control registerr/wr/wtimebase timer1--00100 b 0000aa h wtcwatch timer control registerr/wr/wwatch timer10001000 b 0000ab h prohibited area 0000ac h eicr wake-up interrupt control register r/wr/w key-on wake-up interrupt 00000000 b 0000ad h eifrwake-up interrupt flag registerr/wr/w-------0 b 0000ae h fmcs flash memory control status register r/wr/w flash memory interface circuit 000x0000 b 0000af h prohibited area 0000b0 h icr00interrupt control register 00r/wr/w interrupt controller 00000111 b 0000b1 h icr01interrupt control register 01r/wr/w00000111 b 0000b2 h icr02interrupt control register 02r/wr/w00000111 b 0000b3 h icr03interrupt control register 03r/wr/w00000111 b 0000b4 h icr04interrupt control register 04r/wr/w00000111 b 0000b5 h icr05interrupt control register 05r/wr/w00000111 b 0000b6 h icr06interrupt control register 06r/wr/w00000111 b 0000b7 h icr07interrupt control register 07r/wr/w00000111 b 0000b8 h icr08interrupt control register 08r/wr/w00000111 b 0000b9 h icr09interrupt control register 09r/wr/w00000111 b 0000ba h icr10interrupt control register 10r/wr/w00000111 b 0000bb h icr11interrupt control register 11r/wr/w00000111 b 0000bc h icr12interrupt control register 12r/wr/w00000111 b 0000bd h icr13interrupt control register 13r/wr/w00000111 b 0000be h icr14interrupt control register 14r/wr/w00000111 b 0000bf h icr15interrupt control register 15r/wr/w00000111 b mb90378 series 28 (continued) addressabbreviationregister byte access word access resource nameinitial value 0000c0 h mbcrlmi 2 c bus control register (lower)r/wr/w multi-address i 2 c ----0000 b 0000c1 h mbcrhmi 2 c bus control register (upper)r/wr/w00000000 b 0000c2 h mbsrlmi 2 c bus status register (lower)rr00000000 b 0000c3 h mbsrhmi 2 c bus status register (upper)r/wr/w--000000 b 0000c4 h mdarmi 2 c data registerr/wr/wxxxxxxxx b 0000c5 h malrmi 2 c alert registerr/wr/w----0000 b 0000c6 h madr1mi 2 c address register 1r/wr/w-xxxxxxx b 0000c7 h madr2mi 2 c address register 2r/wr/w-xxxxxxx b 0000c8 h madr3mi 2 c address register 3r/wr/w-xxxxxxx b 0000c9 h madr4mi 2 c address register 4r/wr/w-xxxxxxx b 0000ca h madr5mi 2 c address register 5r/wr/w-xxxxxxx b 0000cb h madr6mi 2 c address register 6r/wr/w-xxxxxxx b 0000cc h mccrmi 2 c clock control registerr/wr/w0-000000 b 0000cd h mtcrmi 2 c timeout control registerr/wr/w-0-00000 b 0000ce h mtocmi 2 c timeout clock registerr/wr/w00000000 b 0000cf h mtodmi 2 c timeout data registerr/wr/w00000000 b 0000d0 h mstomi 2 c slave timeout registerr/wr/w00000000 b 0000d1 h mmtomi 2 c master timeout registerr/wr/w00000000 b 0000d2 h smr2serial mode register 2r/wr/w uart2 00000-00 b 0000d3 h scr2serial control register 2r/wr/w00000100 b 0000d4 h sidr2/ sodr2 input data register 2/ output data register 2 r/wr/wxxxxxxxx b 0000d5 h ssr2status register 2r/wr/w00001000 b 0000d6 h m2cr2mode 2 control register 2r/wr/w----1000 b 0000d7 h cdcr2clock division control register 2r/wr/w communication prescaler 2 00--0000 b 0000d8 h eenr1interrupt enable registerr/wr/w extend external interrupt 1 00000000 b 0000d9 h eerr1interrupt cause registerr/wr/wxxxxxxxx b 0000da h eelr1request level setting register r/wr/w00000000 b 0000db h r/wr/w00000000 b 0000dc h eenr2interrupt enable registerr/wr/w extend external interrupt 2 00000000 b 0000dd h eerr2interrupt cause registerr/wr/wxxxxxxxx b 0000de h eelr2request level setting register r/wr/w00000000 b 0000df h r/wr/w00000000 b 0000e0 h pdl3port 3 data latch registerr/wr/wport 3 data latch00000000 b mb90378 series 29 (continued) addressabbreviationregister byte access word access resource nameinitial value 0000e1 h bdrbit data registerr/wr/w bit decoder ----xxxx b 0000e2 h brrlbit result register (lower)rrxxxxxxxx b 0000e3 h brrhbit result register (upper)rrxxxxxxxx b 0000e4 h smr3serial mode register 3r/wr/w uart3 00000-00 b 0000e5 h scr3serial control register 3r/wr/w00000100 b 0000e6 h sidr3 / sodr3 input data register 3/ output data register 3 r/wr/wxxxxxxxx b 0000e7 h ssr3status register 3r/wr/w00001000 b 0000e8 h m2cr3mode 2 control register 3r/wr/w----1000 b 0000e9 h cdcr3clock division control register 3r/wr/w communication prescaler 3 00--0000 b 0000ea h tmcsrl5 timer control status register ch5 (lower) r/wr/w 16-bit reload timer (ch5) 00000000 b 0000eb h tmcsrh5 timer control status register ch5 (upper) r/wr/w----0000 b 0000ec h tmr5/ tmrd5 16-bit timer/reload register ch5 r/wxxxxxxxx b 0000ed h r/wxxxxxxxx b 0000ee h lcrllcd control register 0r/wr/w lcd controller/driver 00010000 b 0000ef h lcrhlcd control register 1r/wr/w00000000 b 0000f0 h to 0000f4 h vramlcd display ramr/w-xxxxxxxx b 0000f5 h to 0000f7 h prohibited area 0000f8 h to 0000ff h external area 000100 h to 0018ff h prohibited area (ram area) 001ff0 h padr0 program address detection register 0 r/wr/w address match detection xxxxxxxx b 001ff1 h program address detection register 1 r/wr/wxxxxxxxx b 001ff2 h program address detection register 2 r/wr/wxxxxxxxx b mb90378 series 30 (continued) addressabbreviationregister byte access word access resource nameinitial value 001ff3 h padr1 program address detection register 3 r/wr/w address match detection xxxxxxxx b 001ff4 h program address detection register 4 r/wr/wxxxxxxxx b 001ff5 h program address detection register 5 r/wr/wxxxxxxxx b 001ff6 h to 003f7f h prohibited area 003f80 h udrl10up data register 10 (lower)r/wr/w lpc data buffer array-extend xxxxxxxx b 003f81 h udrh10up data register 10 (upper)r/wr/wxxxxxxxx b 003f82 h udrl11up data register 11 (lower)r/wr/wxxxxxxxx b 003f83 h udrh11up data register 11 (upper)r/wr/wxxxxxxxx b 003f84 h udrl12up data register 12 (lower)r/wr/wxxxxxxxx b 003f85 h udrh12up data register 12 (upper)r/wr/wxxxxxxxx b 003f86 h udrl13up data register 13 (lower)r/wr/wxxxxxxxx b 003f87 h udrh13up data register 13 (upper)r/wr/wxxxxxxxx b 003f88 h udrl14up data register 14 (lower)r/wr/wxxxxxxxx b 003f89 h udrh14up data register 14 (upper)r/wr/wxxxxxxxx b 003f8a h udrl15up data register 15 (lower)r/wr/wxxxxxxxx b 003f8b h udrh15up data register 15 (upper)r/wr/wxxxxxxxx b 003f8c h udrl16up data register 16 (lower)r/wr/wxxxxxxxx b 003f8d h udrh16up data register 16 (upper)r/wr/wxxxxxxxx b 003f8e h udrl17up data register 17 (lower)r/wr/wxxxxxxxx b 003f8f h udrh17up data register 17 (upper)r/wr/wxxxxxxxx b 003f90 h udrl18up data register 18 (lower)r/wr/wxxxxxxxx b 003f91 h udrh18up data register 18 (upper)r/wr/wxxxxxxxx b 003f92 h udrl19up data register 19 (lower)r/wr/wxxxxxxxx b 003f93 h udrh19up data register 19 (upper)r/wr/wxxxxxxxx b 003f94 h udrl1aup data register 1a (lower)r/wr/wxxxxxxxx b 003f95 h udrh1aup data register 1a (upper)r/wr/wxxxxxxxx b 003f96 h udrl1bup data register 1b (lower)r/wr/wxxxxxxxx b 003f97 h udrh1bup data register 1b (upper)r/wr/wxxxxxxxx b 003f98 h udrl1cup data register 1c (lower)r/wr/wxxxxxxxx b 003f99 h udrh1cup data register 1c (upper)r/wr/wxxxxxxxx b 003f9a h udrl1dup data register 1d (lower)r/wr/wxxxxxxxx b 003f9b h udrh1dup data register 1d (upper)r/wr/wxxxxxxxx b mb90378 series 31 (continued) addressabbreviationregister byte access word access resource nameinitial value 003f9c h udrl1eup data register 1e (lower)r/wr/w lpc data buffer array-extend xxxxxxxx b 003f9d h udrh1eup data register 1e (upper)r/wr/wxxxxxxxx b 003f9e h udrl1fup data register 1f (lower)r/wr/wxxxxxxxx b 003f9f h udrh1fup data register 1f (upper)r/wr/wxxxxxxxx b 003fa0 h dbaclrdata buffer array clear registerr/wr/w lpc data buffer array -----000 b 003fa1 h prohibited area 003fa2 h fwr0 flash programming control register 0 r/wr/w dual operating flash 00000000 b 003fa3 h fwr1 flash programming control register 1 r/wr/w00000000 b 003fa4 h ssr0sector switching registerr/wr/w00xxxxx0 b 003fa5 h to 003fae h prohibited area 003faf h pckcrpll clock control registerwwpllxxxx0000 b 003fb0 h prll2ppg reload register (lower)r/wr/w 8/16-bit ppg timer 2 xxxxxxxx b 003fb1 h prlh2ppg reload register (upper)r/wr/wxxxxxxxx b 003fb2 h prll3ppg reload register (lower)r/wr/wxxxxxxxx b 003fb3 h prlh3ppg reload register (upper)r/wr/wxxxxxxxx b 003fb4 h ppgc2ppg control register ch2r/wr/w00000001 b 003fb5 h ppgc3ppg control register ch3r/wr/w00000001 b 003fb6 h pcs23ppg clock control registerr/wr/w000000xx b 003fb7 h to 003fbf h prohibited area 003fc0 h udrl0up data register 0 (lower)r/wr/w lpc data buffer array xxxxxxxx b 003fc1 h udrh0up data register 0 (upper)r/wr/wxxxxxxxx b 003fc2 h udrl1up data register 1 (lower)r/wr/wxxxxxxxx b 003fc3 h udrh1up data register 1 (upper)r/wr/wxxxxxxxx b 003fc4 h udrl2up data register 2 (lower)r/wr/wxxxxxxxx b 003fc5 h udrh2up data register 2 (upper)r/wr/wxxxxxxxx b 003fc6 h udrl3up data register 3 (lower)r/wr/wxxxxxxxx b 003fc7 h udrh3up data register 3 (upper)r/wr/wxxxxxxxx b 003fc8 h udrl4up data register 4 (lower)r/wr/wxxxxxxxx b 003fc9 h udrh4up data register 4 (upper)r/wr/wxxxxxxxx b mb90378 series 32 (continued) addressabbreviationregister byte access word access resource nameinitial value 003fca h udrl5up data register 5 (lower)r/wr/w lpc data buffer array xxxxxxxx b 003fcb h udrh5up data register 5 (upper)r/wr/wxxxxxxxx b 003fcc h udrl6up data register 6 (lower)r/wr/wxxxxxxxx b 003fcd h udrh6up data register 6 (upper)r/wr/wxxxxxxxx b 003fce h udrl7up data register 7 (lower)r/wr/wxxxxxxxx b 003fcf h udrh7up data register 7 (upper)r/wr/wxxxxxxxx b 003fd0 h udrl8up data register 8 (lower)r/wr/wxxxxxxxx b 003fd1 h udrh8up data register 8 (upper)r/wr/wxxxxxxxx b 003fd2 h udrl9up data register 9 (lower)r/wr/wxxxxxxxx b 003fd3 h udrh9up data register 9 (upper)r/wr/wxxxxxxxx b 003fd4 h udrlaup data register a (lower)r/wr/wxxxxxxxx b 003fd5 h udrhaup data register a (upper)r/wr/wxxxxxxxx b 003fd6 h udrlbup data register b (lower)r/wr/wxxxxxxxx b 003fd7 h udrhbup data register b (upper)r/wr/wxxxxxxxx b 003fd8 h udrlcup data register c (lower)r/wr/wxxxxxxxx b 003fd9 h udrhcup data register c (upper)r/wr/wxxxxxxxx b 003fda h udrldup data register d (lower)r/wr/wxxxxxxxx b 003fdb h udrhdup data register d (upper)r/wr/wxxxxxxxx b 003fdc h udrleup data register e (lower)r/wr/wxxxxxxxx b 003fdd h udrheup data register e (upper)r/wr/wxxxxxxxx b 003fde h udrlfup data register f (lower)r/wr/wxxxxxxxx b 003fdf h udrhfup data register f (upper)r/wr/wxxxxxxxx b 003fe0 h dndl0down data register 0 (lower)rrxxxxxxxx b 003fe1 h dndh0down data register 0 (upper)rrxxxxxxxx b 003fe2 h dndl1down data register 1 (lower)rrxxxxxxxx b 003fe3 h dndh1down data register 1 (upper)rrxxxxxxxx b 003fe4 h dndl2down data register 2 (lower)rrxxxxxxxx b 003fe5 h dndh2down data register 2 (upper)rrxxxxxxxx b 003fe6 h dndl3down data register 3 (lower)rrxxxxxxxx b 003fe7 h dndh3down data register 3 (upper)rrxxxxxxxx b 003fe8 h dndl4down data register 4 (lower)rrxxxxxxxx b 003fe9 h dndh4down data register 4 (upper)rrxxxxxxxx b 003fea h dndl5down data register 5 (lower)rrxxxxxxxx b 003feb h dndh5down data register 5 (upper)rrxxxxxxxx b 003fec h dndl6down data register 6 (lower)rrxxxxxxxx b 003fed h dndh6down data register 6 (upper)rrxxxxxxxx b mb90378 series 33 (continued) ? meaning of abbreviations used for reading and writing r/w : readable and writable r : read-only w : write-only ? explanation of initial values 0 : the bit is initialized to 0. 1 : the bit is initialized to 1. x : the initial value of the bit is undefined. - : the bit is not used. its initial value is undefined. ? instruction using io addressing e.g. mov a, io, is not supported for registers area 003f80 h to 003fff h . addressabbreviationregister byte access word access resource nameinitial value 003fee h dndl7down data register 7 (lower)rr lpc data buffer array xxxxxxxx b 003fef h dndh7down data register 7 (upper)rrxxxxxxxx b 003ff0 h dbaal data buffer array address register (lower) r/wr/wxxxxxxxx b 003ff1 h dbaah data buffer array address register (upper) r/wr/wxxxxxxxx b 003ff2 h , 003ff3 h prohibited area 003ff4 h tmcsrl6 timer control status register ch6 (lower) r/wr/w 16-bit reload timer (ch6) 00000000 b 003ff5 h tmcsrh6 timer control status register ch6 (upper) r/wr/w----0000 b 003ff6 h tmr6/ tmrd6 16-bit timer/reload register ch6 r/wxxxxxxxx b 003ff7 h r/wxxxxxxxx b 003ff8 h prll0ppg reload register (lower)r/wr/w 8/16-bit ppg timer 1 xxxxxxxx b 003ff9 h prlh0ppg reload register (upper)r/wr/wxxxxxxxx b 003ffa h prll1ppg reload register (lower)r/wr/wxxxxxxxx b 003ffb h prlh1ppg reload register (upper)r/wr/wxxxxxxxx b 003ffc h ppgc0ppg control register ch0r/wr/w00000001 b 003ffd h ppgc1ppg control register ch1r/wr/w00000001 b 003ffe h pcs01ppg clock control registerr/wr/w000000xx b 003fff h prohibited area mb90378 series 34 interrupt factors, interrupt vectors, interrupt control register (continued) interrupt cause ei 2 os support interrupt vector interrupt control register priority* 2 numberaddressicraddress reset #0808 h ffffdc h high low int9 instruction #0909 h ffffd8 h exception processing #100a h ffffd4 h a/d converter conversion termination#110b h ffffd0 h icr000000b0 h * 1 timebase timer#120c h ffffcc h upi0 ibf/lpc reset#130d h ffffc8 h icr010000b1 h * 1 upi1 ibf#140e h ffffc4 h upi2 ibf#150f h ffffc0 h icr020000b2 h * 1 upi3 ibf#1610 h ffffbc h dtp/ext. interrupt channels 0/1 detection#1711 h ffffb8 h icr030000b3 h * 1 dtp/ext. interrupt channels 2/3 detection#1812 h ffffb4 h dtp/ext. interrupt channels 4/5 detection#1913 h ffffb0 h icr040000b4 h * 1 key-on wake-up interrupt detection#2014 h ffffac h upi0/1/2/3 obe#2115 h ffffa8 h icr050000b5 h * 2 16-bit ppg timer 1 / 8/16-bit ppg timer 0/1#2216 h ffffa4 h ps/2 interface 0/1#2317 h ffffa0 h icr060000b6 h * 1 ps/2 interface 2#2418 h ffff9c h watch timer#2519 h ffff98 h icr070000b7 h * 1 i 2 c transfer complete / bus error#261a h ffff94 h 16-bit ppg timer 2/3#271b h ffff90 h icr080000b8 h * 1 dtp/ext. interrupt channels 6/7 detection#281c h ffff8c h multi-address i 2 c transfer complete / bus error #291d h ffff88 h icr090000b9 h * 1 extend external interrupt 00 to 07/08 to 15 #301e h ffff84 h i 2 c timeout / standby wake-up#311f h ffff80 h icr100000ba h * 1 16-bit reload timer 1/2/5 underflow#3220 h ffff7c h multi-address i 2 c timeout / standby wake-up#3321 h ffff78 h icr110000bb h * 1 16-bit reload timer 3/4/6 underflow#3422 h ffff74 h uart1 receive#3523 h ffff70 h icr120000bc h * 1 uart1 send#3624 h ffff6c h uart2 receive#3725 h ffff68 h icr130000bd h * 1 uart2 send#3826 h ffff64 h uart3 receive#3927 h ffff60 h icr140000be h * 1 uart3 send#4028 h ffff5c h flash memory status#4129 h ffff58 h icr150000bf h * 1 delayed interrupt generator module#422a h ffff54 h mb90378 series 35 (continued) : can be used and interrupt request flag is cleared by ei 2 os interrupt clear signal. : cannot be used. : can be used and support the ei 2 os stop request. : can be used. *1 : for peripheral functions that share the icr register, the interrupt level will be the same. if the extended intelligent i/o service is to be used with a peripheral function that shares the icr register with another peripheral function, the service can be started by either of the function. and if ei 2 os clear is supported, both interrupt request flags for the two interrupt causes are cleared by ei 2 os interrupt clear signal. it is recommended to mask either of the interrupt request during the use of ei 2 os. ei 2 os service cannot be started multiple times simultaneously. interrupt other than the operating interrupt is masked during ei 2 os operation. it is recommended to mask either of the interrupt requests during the use of ei 2 os. *2 : this priority is applied when interrupts of the same level occur simultaneously. mb90378 series 36 electrical characteristics 1.absolute maximum rating (continued) parameter symbol rating unitremarks minmax power supply voltage* 1 v cc v ss 0.3v ss 4.0v av cc v ss 0.3v ss 4.0vv cc av cc * 2 a/d converter reference input voltage* 1 avrv ss 0.3v ss 4.0vav cc avr, avr av ss lcd power supply voltage* 1 v1 to v3v ss 0.3v ss 4.0vv1 to v3 must not exceed v cc input voltage* 1 v i1 v ss 0.3v ss 4.0v all pins except p40 to p45, p80 to p82, p90 to p95 * 3 v i2 v ss 0.3v ss 6.0vp40 to p45, p80 to p82, p90 to p95 output voltage* 1 v o v ss 0.3v ss 4.0v*3 maximum clamp currenti clamp 2.0 2.0ma*5 total maximum clamp current |i clamp | 20ma*5 l level maximum output current i ol1 10maall pins except pf0 to pf7 * 4 i ol2 20mapf0 to pf7 * 4 l level average output current i olav1 4ma all pins except pf0 to pf7 average output current operating current operating efficiency i olav2 12ma pf0 to pf7 average output current operating current operating efficiency l level total maximum output current i ol 100ma l level total average output current i olav 50ma average output current operating current operating efficiency h level maximum output current i oh 10ma*4 h level average output current i ohav 3ma average output current operating current operating efficiency h level total maximum output current i oh 100ma h level total average output current i ohav 50ma average output current operating current operating efficiency power consumptionp d 200mw operating temperaturet a 40 85 c storage temperaturetstg 55 150 c mb90378 series 37 (continued) *1 : this parameter is based on v ss av ss 0.0 v. *2 : set av cc and v cc at the same voltage. take care so that avr does not exceed v cc 0.3 v when the power is turned on. *3 : v i and v o shall never exceed v cc 0.3 v. *4 : the maximum output current is a peak value for a corresponding pin. *5 : use within recommended operating conditions. use at dc voltage (current). the b signal should always be applied a limiting resistance placed between the b signal and the microcontroller. the value of the limiting resistance should be set so that when the b signal is applied the input current to the microcontroller pin does not exceed rated values, either instantaneously or for prolonged periods. note that when the microcontroller drive current is low, such as in the power saving modes, the b input potential may pass through the protective diode and increase the potential at the vcc pin, and this may affect other devices. note that if a b signal is input when the microcontroller power supply is off (not fixed at 0 v), the power supply is provided from the pins, so that incomplete operation may result. note that if the b input is applied during power-on, the power supply is provided from the pins and the resulting supply voltage may not be sufficient to poerate the power-on reset. care must be taken not to leave the b input pin open. note that analog system input/output pins other than the a/d input pins (lcd drive pins, etc.) cannot accept b signal input. sample recommended circuits : warning:semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. do not exceed these ratings. pch nch v cc r input/output equivalent circuits protective diode limiting resistance b input (0 v to 16 v) mb90378 series 38 2.recommended operating conditions (v ss av ss 0.0 v) *1 : the operating voltage varies with the operation frequency. *2 : set av cc and v cc at the same voltage. *3 : take care so that avr does not exceed v cc + 0.3 v when power is turned on. warning:the recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. all of the device s electrical characteristics are warranted when the device is operated within these ranges. always use semiconductor devices within their recommended operating condition ranges. operation outside these ranges may adversely affect reliability and could result in device failure. no warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. users considering application outside the listed conditions are advised to contact their fujitsu representatives beforehand. parameter symbol value unitremarks minmax power supply voltage * 2 v cc 2.7 * 1 3.6vnormal operation assurance range v cc 1.83.6vretains the ram state in stop mode a/d converter reference input voltage * 3 avr0av cc vnormal operation assurance range lcd power supply voltagev1 to v3v ss v cc v v1 to v3 pins (the optimum value is dependent on the lcd element in use.) operating temperaturet a 40 85 c mb90378 series 39 3.dc characteristics (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) (continued) parametersymbolpin namecondition value unitremarks mintypmax h level input voltage v ih p10 to p17, p20 to p27, p30 to p37, p46, p47, p51 to p57, pc0 to pc7, pd0 to pd7 0.7 v cc v cc 0.3v cmos input pins v ihs p00 to p07, p60 to p67, p70 to p77, p83 to p86, pa0 to pa7, pb0 to pb7, pe0 to pe7, pf0 to pf7, rst 0.8 v cc v cc 0.3v cmos hysteresis input pins v ihs5 p40 to p450.8 v cc v ss 5.5v 5 v tolerant cmos hysteresis input pins v ih5 p50, p82 0.7 v cc v ss 5.5v 5 v tolerant cmos input pins v ihsm p80, p81, p90 to p95 2.1 v ss 5.5v smbus input pins v ihm md0 to md2v cc 0.3 v cc 0.3vmode pins l level input voltage v il p10 to p17, p20 to p27, p30 to p37, p46, p47, p50 to p57, p82, pc0 to pc7, pd0 to pd7 v ss 0.3 0.3 v cc v cmos input pins v ils p00 to p07, p40 to p45, p60 to p67, p70 to p77, p83 to p86, pa0 to pa7, pb0 to pb7, pe0 to pe7, pf0 to pf7, rst v ss 0.3 0.2 v cc v cmos hysteresis input pins v ilsm p80, p81, p90 to p95 v ss 0.3 0.8v smbus input pins v ilm md0 to md2v ss 0.3 v ss 0.3vmode pins open-drain output pin application voltage v d5 p40 to p45, p50, p80 to p82, p90 to p95 v ss 0.3 v ss 5.5v v d p46, pf0 to pf7v ss 0.3 v cc 0.3v h level output voltage v oh1 all port pins except p40 to p46, p50, p80 to p82, p90 to p95, pf0 to pf7 v cc 3.0 v i oh1 4.0 ma v cc 0.5 v l level output voltage v ol1 all port pins except pf0 to pf7 i ol1 4.0 ma 0.4v v ol2 pf0 to pf7i ol2 12.0 ma 0.4v mb90378 series 40 (continued) parametersymbolpin namecondition value unitremarks mintypmax input leakage current (hi-z output leakage current) i il all input pins v cc 3.3 v, v ss v i v cc 5 5 a open-drain output leakage current i leak p40 to p46, p50, p80 to p82, p90 to p95, pf0 to pf7 5 a power supply current* i cc v cc v cc 3.3 v, internal operation at 20 mhz 5668ma i ccs v cc 3.3 v, internal operation at 20 mhz, in sleep mode 2330ma i ccl v cc 3.3 v, external 32 khz, internal operation at 8 khz, in sub-clock mode, t a 25 c 2380 a i ccls v cc 3.3 v, external 32 khz, internal operation at 8 khz, in sub-clock sleep mode, t a 25 c 1050 a i ccwat v cc 3.3 v, external 32 khz, internal operation at 8 khz, in watch mode, t a 25 c 1.530 a power supply current* i cct v cc v cc 3.3 v, internal operation at 20 mhz, in timebase timer mode 2.03ma i cch v cc 3.3 v, in stop mode, t a 25 c 120 a input capacitance c in all input pins except v cc , av cc , v ss , av ss 1080pf mb90378 series 41 (continued) * : the current value is preliminary value and may be subject to change for enhanced characteristics without previous notice. the power supply current is measured with an external clock. parametersymbolpin namecondition value unitremarks mintypmax lcd divided resistance r lcd between v cc and v3 at v cc 3.3 v 100200400 k between v3 and v2 between v2 and v1 between v1 and v ss at v cc 3.3 v 50100200 com0 to com3 output impedance r vcom com0 to com3 v1 to v3 3.3 v 5k seg0 to seg8 output impedance r vseg seg0 to seg8 5k lcd leakage current l lcdl v1 to v3, com0 to com3, seg0 to seg8 1 a pull-up resistance r up p00 to p07,p10 to p17, p20 to p27,p30 to p37, rst 2550100k pull-down resistance r down md2 2550100k mb90v378 only mb90378 series 42 4.ac characteristics (1) clock timings (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) parametersymbolpin namecondition value unitremarks mintypmax clock frequency f ch x0, x1 3 16mhz 1/2 ( when pll stops ) when using an oscillation circuit 4 16mhz pll 1 when using an oscillation circuit 4 10mhz pll 2 when using an oscillation circuit 4 6.67mhz pll 3 when using an oscillation circuit 4 5mhz pll 4 when using an oscillation circuit 3 32mhz 1/2 ( when pll stops ) when using an external clock 4 20mhz pll 1 when using an external clock 4 10mhz pll 2 when using an external clock 4 6.67mhz pll 3 when using an external clock 4 5mhz pll 4 when using an external clock f cl x0a, x1a 32.768 khz clock cycle time t hcyl x0, x1 31.25 333ns t lcyl x0a, x1a 30.5 s frequency fluctuation rate locked* f 5% input clock pulse width p wh p wl x0 5 ns recommend duty ratio of 30% to 70% p whl p wll x0a 15.2 s recommend duty ratio of 30% to 70% input clock rise/fall time t cr t cf x0 5ns external clock operation internal operating clock frequency f cp 1.5 20mhzmain clock operation f lcp 8.192 khzsub-clock operation internal operating clock cycle time t cp 50 666nsmain clock operation t lcp 122.1 ssub-clock operation mb90378 series 43 t hcyl p wh t cf p wl t cr x0 0.8 v cc 0.8 v cc 0.2 v cc 0.8 v cc 0.2 v cc x0a p whl t cf t lcyl t cr p wll 0.8 v cc 0.8 v cc 0.8 v cc 0.2 v cc 0.2 v cc x0, x1 clock timing x0a, x1a clock timing mb90378 series 44 p o w e r s u p p l y v o l t a g e v c c ( v ) machine clock f cp (mhz) 1.5341620 3.6 3.0 2.7 operation guarantee range of pll normal operation guarantee range guaranteed oscillation frequency range pll operation guarantee range relationship between machine clock frequency and power supply voltage relationship between external clock frequency and machine clock frequency m a c h i n e c l o c k f c p ( m h z ) external clock f c (mhz)* 36.67 41624 20 16 12 8 4 1.5 81232 1 4 3 2 guaranteed oscillation frequency range 51020 1 2 (pll off) * : when using a crystal oscillator or a ceramic oscillator, the maximum oscillation clock frequency is 16 mhz. mb90378 series 45 the ac ratings are measured for the following measurement reference voltages : hysteresis input pin cmos input pin smbus input pin output pin 0.8 v cc 0.2 v cc 0.7 v cc 0.3 v cc 2.1 v 0.8 v 2.4 v 0.8 v input signal waveform output signal waveform mb90378 series 46 (2) reset input timing (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) * : oscillation time of oscillator is the time to reach to 90% of the oscillation amplitude from stand still. in the crystal oscillator, the oscillation time is between several ms to tens of ms. in far/ceramic oscillator, the oscillation time is between hundreds of s to several ms. in the external clock, the oscillation time is 0 ms. note : t cp is the internal operating clock cycle time. refer to (1) clock timings rating for t cp . parametersymbolpin namecondition value unitremarks minmax reset input timet rstl rst 16 t cp ns normal operation oscillation time of oscillator* 16 t cp ms in stop mode and sub-clock mode t rstl 0.2 v cc 0.2 v cc 16 t cp rst x0 90% of oscillation amplitude instruction execution oscillation stabilization time oscillation time of oscillator internal operation clock internal reset in stop mode mb90378 series 47 (3) power-on reset (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) * : v cc must be kept lower than 0.2 v before power-on. notes : the above values are used for causing a power-on reset. some registers in the device are initialized only upon a power-on reset. to initialize these registers, turn on the power supply using the above values. make sure that power supply rises within the selected oscillation stabilization time. if the power supply voltage needs to be varied in the course of operation, a smooth voltage rise is recommended. parametersymbolpin namecondition value unitremarks minmax power supply rise timet r v cc * 50ms power supply cut-off timet off v cc *1 ms due to repeated operations t off t r 2.2 v 0.2 v0.2 v0.2 v v cc ram data hold v cc 1.8 v v ss sudden changes in the power supply voltage may cause a power-on reset. to change the power supply voltage while the device is in operation, it is recommended to raise the voltage smoothly to suppress fluctuations as shown below. in this case, change the supply voltage with the pll clock not used. if the voltage drop is 1 v or fewer per second, however, you can use the pll clock. it is recommended to keep the rising speed of the supply voltage at 50 mv/ms or slower. mb90378 series 48 (4) uart1 to uart3 (v cc = 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) notes : these are ac ratings in the clk synchronous mode. c l is the load capacitance value connected to pins while testing. t cp is the internal operating clock cycle time. refer to (1) clock timings rating for t cp . parametersymbolpin namecondition value unitremarks minmax serial clock cycle timet scyc uck1 to uck3 c l 80 pf 1 ttl for an output pin of internal shift clock mode 4 t cp ns uck uo delay timet slov uck1 to uck3, uo1 to uo3 8080ns valid ui uck t ivsh uck1 to uck3, ui1 to ui3 100 ns uck valid ui hold timet shix uck1 to uck3, ui1 to ui3 t cp ns serial clock h pulse widtht shsl uck1 to uck3 c l 80 pf 1 ttl for an output pin of external shift clock mode 4 t cp ns serial clock l pulse widtht slsh uck1 to uck34 t cp ns uck uo delay timet slov uck1 to uck3, uo1 to uo3 150ns valid ui uck t ivsh uck1 to uck3, ui1 to ui3 60 ns uck valid ui hold timet shix uck1 to uck3, ui1 to ui3 60 ns mb90378 series 49 t scyc t slov 0.8 v0.8 v 2.4 v 2.4 v 0.8 v 0.8 v cc 0.8 v cc 0.2 v cc 0.2 v cc t shix t ivsh uck uo ui internal shift clock mode t shix t slsh 0.2 v cc 0.2 v cc 0.8 v cc 0.8 v cc t slov 2.4 v 0.8 v t shsl 0.8 v cc 0.8 v cc 0.2 v cc 0.2 v cc t ivsh uck uo ui internal shift clock mode mb90378 series 50 (5) resources input timing (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) note : t cp is the internal operating clock cycle time. refer to (1) clock timings rating for t cp . (6) trigger input timing (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) note : t cp is the internal operating clock cycle time. refer to (1) clock timings rating for t cp . parametersymbolpin namecondition value unitremarks minmax timer input pulse width t tiwh t tiwl tin1 to tin6 4 t cp ns parametersymbolpin namecondition value unitremarks minmax input pulse width t trgh t trgl adtg, int0 to int7, eei0 to eei15, ksi0 to ksi7 5 t cp nsnormal operation 1 sstop mode 0.8 v cc 0.8 v cc 0.2 v cc 0.2 v cc t tiwh t tiwl tin1 to tin6 t trgh eei0 to eei15 int0 to int7 ksi0 to ksi7 adtg 0.8 v cc 0.8 v cc 0.2 v cc 0.2 v cc t trgl 0.7 v cc 0.7 v cc 0.3 v cc 0.3 v cc t trgl t trgh mb90378 series 51 (7) i 2 c / multi-address i 2 c timing (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) notes : t cp is the internal operating clock cycle time. refer to (1) clock timings rating for t cp . m is the setting bit of shift clock oscillation defined in the iccr register (cs4, cs3) and mccr register (cs4, cs3) . please refer to the mb90378 series h/w manual for details. n is the setting bit of shift clock oscillation defined in the iccr register (cs2 to cs0) and mccr register (cs2 to cs0) . please refer to the mb90378 series h/w manual for details. t dosu is shown in the interrupt time is longer than the l width of scl. sda and scl output value is specified on condition that the rise/fall time is 0 ns . *1 : at the stop condition or transferring of next byte. *2 : after setting register bit ibcrh : scc at restart. parametersymbolpin name value unitremarks minmax start condition outputt sta scl, sda t cp (m x n/2 1) 20t cp (m x n/2 1) 20ns master mode stop condition outputt sto scl, sda t cp (m x n/2 3) - 20t cp (m x n/2 3) 20ns master mode start condition detectt sta scl, sda t cp 40 ns stop condition detectt sto scl, sda t cp 40 ns restart condition outputt stasu scl, sda t cp (m x n/2 3) 20t cp (m x n/2 3) 20ns master mode restart condition detectt stasu scl, sda t cp 40 ns scl output l widtht low sclt cp x m x n/2 20t cp x m x n/2 20ns master mode scl output h widtht high sclt cp (m x n/2 2) 20t cp (m x n/2 2) 20ns master mode sda output delayt do sdat cp x 3 20t cp x 3 20ns sda output setup time after interrupt t dosu sda t cp x m x n/2 20 ns*1 t cp x 4 20 ns*2 scl input l pulset low sclt cp x 3 40 ns scl input h pulset high sclt cp 40 ns sda output setup timet su sda40 ns sda hold timet ho sda0 ns mb90378 series 52 sda scl t su t stasu t sta t low t ho t do 1 ack 9 t do t ho t dosu data transmit (master/slave) data receive (master/slave) sda scl 6789 ack t su t ho t do t do t dosu t sto t low t high mb90378 series 53 (8) ps/2 interface timing (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss 0.0 v, t a 40 c to 85 c) note : t cp is the internal operating clock cycle time. refer to (1) clock timings rating for t cp . parametersymbolpin namecondition value unitremarks mintypmax psck clock cycle time t pcyc psck0 to psck2, psda0 to psda2 4 t cp ns psck psda t plov psck0 to psck2, psda0 to psda2 transmission mode2 t cp ns valid psda psck t pivsh psck0 to psck2, psda0 to psda2 reception mode 1 t cp ns psck valid psda hold time t phix psck0 to psck2, psda0 to psda2 1 t cp ns psck clock h pulse width t phsl psck0 to psck2, psda0 to psda2 2 t cp ns psck clock l pulse width t plsh psck0 to psck2, psda0 to psda2 2 t cp ns psck0 psck1 psck2 psda0 psda1 psda2 psda0 psda1 psda2 t phix t pcyc t plov t pivsh 0.8 v cc 0.8 v cc 0.2 v cc 0.8 v 2.4 v 0.8 v cc 0.2 v cc transmission mode reception mode mb90378 series 54 (9) lpc timing (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) parametersymbolpin namecondition value unitremarks mintypmax lclk cycle timet cycle 30 ns lclk high timet high 12 ns lclk low timet low 12 ns lclk 0.7 v cc 0.3 v cc t cycle t high t low lclk ac timing mb90378 series 55 parametersymbolpin namecondition value unitremarks mintypmax output valid delayt val 2 12ns float to active delayt on 2 ns active to float delayt off 28ns input setup timet s 7 ns input hold timet h 0 ns lclk output delay tri-state output 0.4 v cc t val t on t off lad, lframe , ga20 ac timing lclk input 0.4 v cc t s t h mb90378 series 56 5.a/d converter electrical characteristics (2.7 v avr av ss , v cc av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) *: the current when the a/d converter is not operating or the cpu is in stop mode (for v cc av cc avr 3.0 v). parametersymbol pin name value unitremarks mintypmax resolution 10bit total error 3.0lsb non-linear error 2.5lsb differential linearity error 1.9lsb zero transition voltage v ot an0 to an11 av ss 1.5 lsb av ss 0.5 lsb av ss 5.5 lsb mv for mb90v378 av ss 2.5 lsb for MB90F378 full-scale transition voltage v fst an0 to an11 avr 3.5 lsb avr 1.5 lsb avr 0.5 lsb mv conversion time 3.1 s actual value is specified as a sum of values specified in adcr0 : ct1, ct0 and adcr0 : st1, st0. be sure that the setting value is greater than the min value sampling period 2 s actual value is specified in adcr0 : st1, st0 bits. be sure that the setting value is greater than the min value analog port input current i ain an0 to an11 0.110 a analog input voltage v ain an0 to an11 av ss avrv reference voltage avrav ss 2.7 av cc v power supply current i a av cc 1.46.4ma i ah 5 a* reference voltage supply current i r avr 94300 a i rh 5 a* offset between channels an0 to an11 4lsb mb90378 series 57 6.a/d converter glossary resolution : analog changes that are identifiable with the a/d converter. linearity error : the deviation of the straight line connecting the zero transition point ( 00 0000 0000 00 0000 0001 ) with the full-scale transition point ( 11 1111 1110 11 1111 1111 ) from actual conversion characteristics. differential linearity error : the deviation of input voltage needed to change the output code by 1 lsb from the theoretical value. total error : the total error is defined as a difference between the actual value and the theoretical value, which includes zero-transition error/full-scale transition error and linearity error. (continued) 3ff h 3fe h 3fd h 004 h 003 h 002 h 001 h avrlavrh v nt 0.5 lsb 0.5 lsb {1 lsb (n 1) 0.5 lsb } actual conversion value (measured value) actual conversion value theoretical characteristics analog input total error for digital output n v nt {1 lsb (n 1) 0.5 lsb} 1 lsb [lsb] 1 lsb (theoretical value) avr avss 1024 [v] v ot (theoretical value) avss 0.5 lsb [v] v fst (theoretical value) avr 1.5 lsb [v] v nt : voltage at a transition of digital output from (n 1) to n total error mb90378 series 58 (continued) 3ff h 3fe h 3fd h 004 h 003 h 002 h 001 h avrlavrhavrlavr h n 1 n n 1 n 2 v ot ( measured value ) {1 lsb (n 1) v ot } actual conversion value v fst (measured value) v nt (measured value) actual conversion value theoretical characteristics actual conversion value actual conversion value theoretical characteristics d i g i t a l o u t p u t d i g i t a l o u t p u t analog input analog input v nt (measured value) v (n 1) t (measured value ) linearity error of digital output n v nt {1 lsb (n 1) v ot } 1 lsb [lsb] differential linearity error of digital output n v ( n 1 ) t v nt 1 lsb 1 [lsb] v fst v ot 1022 [v] 1 lsb v ot : voltage at transition of digital output from 000 h to 001 h v fst : voltage at transition of digital output from 3fe h to 3ff h linearity error differential linearity error mb90378 series 59 7.notes on using a/d converter ? about the external impedance of the analog input and its sampling time ? a/d converter with sample and hold circuit. if the external impedance is too high to keep sufficient sampling time, the analog voltage charged to the internal sampling and hold capacitor is insufficient, adversely affecting a/d conversion precision. ? to satisfy the a/d conversion precision standard, consider the relationship between the external impedance and minimum sampling time and either adjust the resistor value and operating frequency or decrease the external impedance so that the sampling time is longer than the minimum value. ? if the sampling time cannot be sufficient, connect a capacitor of about 0.1 f to the analog input pin. ? about errors as |avr av ss | becomes smaller, values of relative errors grow larger. r c ? analog input circuit model analog input comparator during sampling : on r 1.9 k (max) c 25 pf (max) note : the values are reference values. MB90F378/v378 100 90 80 70 60 50 40 30 20 10 0 35 30 25 20 15 10 5 0 0 1 2 34 5 6 7 8 0 2 4 6 8 10 12 14 16 18 20 MB90F378/v378 MB90F378/v378 ? the relationship between the external impedance and minimum sampling time minimum sampling time ( s)minimum sampling time ( s) e x t e r n a l i m p e d a n c e ( k ) e x t e r n a l i m p e d a n c e ( k ) [external impedance 0 k to 100 k ][external impedance 0 k to 20 k ] mb90378 series 60 8.d/a electrical characteristics (v cc av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) * : with load capacitance is 20 pf. 9.serial irq electrical characteristics (v cc 2.7 v to 3.6 v, av cc 2.7 v to 3.6 v, v ss av ss 0.0 v, t a 40 c to 85 c) 10.flash memory program/erase characteristics parametersymbolpin namecondition value unitremarks mintypmax resolution 8 bit differential linearity error 0.9lsb non-linearity error 1.5lsb conversion time 0.6 s* analog output impedance 2.02.93.8k power supply current i dvr av cc 460 a i dvrs av cc 0.1 ad/a stops parametersymbolpin namecondition value unitremarks mintypmax h level input voltagev ih 0.7 v cc v cc v l level input voltagev il v ss 0.3 v cc v h level output voltagev oh v cc 0.5 v l level output voltagev ol 0.4v parametercondition value unitremarks mintypmax sector erase time (4 kbytes sector) t a 25 c v cc 3.0 v 0.20.5s excludes 00 h programming prior to erasure sector erase time (16 kbytes sector) 0.57.5s excludes 00 h programming prior to erasure chip erase time 4.6 s excludes 00 h programming prior to erasure byte (8-bit width) programing time 323,600 s except for the over head time of the system program/erase cycle 10,000 cycle mb90378 series 61 example characteristics (MB90F378) ? power supply current (continued) fcin = 16 mhz fcin = 10 mhz fcin = 8 mhz fcin = 4 mhz fcin = 2 mhz t a 25 [ c] i cc [ma] v cc [v] 50.0 40.0 30.0 20.0 10.0 0.0 2.02.53.03.54.0 fcin = 12 mhz t a 25 [ c] i ccs [ma] v cc [v] 18.0 14.0 10.0 2.0 0.0 2.02.53.03.54.0 fcin = 16 mhz fcin = 12 mhz fcin = 10 mhz fcin = 8 mhz fcin = 4 mhz fcin = 2 mhz 4.0 6.0 8.0 12.0 16.0 v cc [v] 2.5 2.0 1.5 1.0 0.5 0.0 2.53.03.54.0 t a 25 [ c] i cch [ a] mb90378 series 62 (continued) t a 25 [ c] v cc v oh1 [v] i oh1 [ma] 0 2 4 6 8 10 0.0 0.5 1.0 1.5 2.0 v cc = 2.5 [v] v cc = 3.0 [v] v cc = 3.5 [v] v cc = 4.0 [v] t a 25 [ c] v cc v oh2 [v] i oh2 [ma] 0 2 4 6 8 10 0.0 0.1 0.3 0.4 0.7 v cc = 2.5 [v] v cc = 3.0 [v] v cc = 3.5 [v] v cc = 4.0 [v] 0.2 0.5 0.6 t a 25 [ c] v ol1 [v] i ol1 [ma] 0246810 0.0 0.2 0.4 0.6 0.8 v cc = 2.5 [v] v cc = 3.0 [v] v cc = 4.0 [v] v cc = 3.5 [v] t a 25 [ c] v ol2 [v] i ol2 [ma] 0246810 0.0 0.1 0.2 0.3 v cc = 2.5 [v] v cc = 3.0 [v] v cc = 3.5 [v] v cc = 4.0 [v] mb90378 series 63 ordering information part numberpackageremarks MB90F378pff-ge1 144-pin plastic lqfp (fpt-144p-m12) mb90378 series 64 package dimension 144-pin plastic lqfp (fpt-144p-m12) c 2003 fujitsu limited f144024s-c-3-3 .059 C .004 +.008 C 0.10 +0.20 1.50 details of "a" part 0~8 ? (mounting height) 0.60 0.15 (.024 .006) 0.25(.010) (.004 .002) 0.10 0.05 (stand off) 0.08(.003) 0.145 C 0.03 +.002 C .001 .006 +0.05 "a" .007 .001 0.18 0.035 m 0.07(.003) 36 37 1 lead no. 0.40(.016) index 144 109 108 18.00 0.20(.709 .008)sq sq 16.00 73 72 * .630 C .004 +.016 C 0.10 +0.40 dimensions in mm (inches). note: the values in parentheses are reference values . note 1) * : these dimensions include resin protrusion. resin protrusion is +0.25(.010)max(each side). note 2)pins width and pins thickness include plating thickness. note 3)pins width do not include tie bar cutting remainder. mb90378 series fujitsu limited all rights reserved. the contents of this document are subject to change without notice. customers are advised to consult with fujitsu sales representatives before ordering. the information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of fujitsu semiconductor device; fujitsu does not warrant proper operation of the device with respect to use based on such information. when you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. fujitsu assumes no liability for any damages whatsoever arising out of the use of the information. any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of fujitsu or any third party or does fujitsu warrant non-infringement of any third-party s intellectual property right or other right by using such information. fujitsu assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. the products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). please note that fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. any semiconductor devices have an inherent chance of failure. you must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. if any products described in this document represent goods or technologies subject to certain restrictions on export under the foreign exchange and foreign trade law of japan, the prior authorization by japanese government will be required for export of those products from japan. f0504 2005 fujitsu limited printed in japan |
Price & Availability of MB90F378 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |