unisonic technologies co., ltd umur2060 preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2013 unisonic technologies co., ltd qw-r601-106.a plastic ultr a -fast recover rectifier ? description the utc umur2060 is an ultra-fast power rectifiers, it uses utc?s advanced technology to provide customers with low forward voltage drop and high cu rrent capability, etc. ? features * low forward voltage drop * high current capability * high efficiency * low power loss ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 umur2060l-ta2-t UMUR2060G-TA2-T to-220-2 k a nc tube note: pin assignment: a: anode, k: cathode umur2060l-ta2-t (1)packing type (2)package type (1) t: tube (2) ta2: to-220-2 (3) l: lead free, g: halogen free (3)halogen free
umur2060 preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-106.a ? absolute maximum ratings (t a =25c, unless otherwise specified.) parameter symbol ratings unit dc blocking voltage v dc 600 v rms voltage v rms 420 v peak repetitive reverse voltage v rrm 600 v average rectified forward current i f ( av ) 20 a peak forward surge current 8.3ms single half sine-wave i fsm 150 a operating junction temperature t j -55~+150 c storage temperature t stg -55~+150 c note: absolute maximum ratings are those values beyond which the device coul d be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal characteristics (ratings at 25c ambient temperat ure unless otherwise specified.) parameter symbol ratings unit junction to case jc 2.0 c/w ? electrical characteristics (t a =25c, unless otherwise specified.) parameter symbol test conditions min typ max unit forward voltage v f i f =20a 1.50 v reverse current i r t a =25c 10 a t a =125c 250 a reverse recovery time t rr i f =0.5a, i r =1.0a, i rec =0.25a 50 ns
umur2060 preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-106.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|