1216 mhz saw filter 8 mhz bandwidth part number SF1216BA02526S idt ? saw products ? 324 clark street, worcester, ma 01606, usa ? ph 1-508-852-5400 ? fax 1-508-852-8456 www.idt.com dsSF1216BA02526S rev x2 25-jult-07 page 1 of 4 description miniature 1216 mhz saw filter in a 3.0 x 3.0 mm surface mount package which can be used as the if filter for a catv set top box or cable modem tuner. typical performance
1216 mhz saw filter 8 mhz bandwidth part number SF1216BA02526S idt ? saw products ? 324 clark street, worcester, ma 01606, usa ? ph 1-508-852-5400 ? fax 1-508-852-8456 www.idt.com dsSF1216BA02526S rev x2 25-jult-07 page 2 of 4 maximum ratings parameter min max units operating temperature range -35 +75 oc storage temperature range -40 +85 oc d. c. voltage 0 v input power level 10 dbm specification parameter min typ max units center frequency, f c 1216 mhz insertion loss 1 3.8 5.5 db passband amplitude ripple, peak to peak 1 0.5 1.2 db bandwidth-3db 16 18.3 db bandwidth-12db 22.9 db stopband rejection 2 , 0 to 1125 mhz 51 56 db stopband rejection 2 , 1125 to 1131 mhz 50 56 db stopband rejection 2 , 1140 to 1148 mhz 50 56 db stopband rejection 2 ,1128 mhz 50 56 db stopband rejection 2 , 1144 mhz 50 56 db stopband rejection 2 , 1172 mhz 47 55 db stopband rejection 2 , 1180 mhz 47 54 db stopband rejection 2 , 1276 to 2000 mhz 47 53 db group delay variation, peak to peak 1 10 nsec source/load impedance 200/200 ? notes: 1. over 1212 to 1220 mhz. 2. rejection relative to insertion loss. test circuit 200 ohm balanced no matching circuit required
1216 mhz saw filter 8 mhz bandwidth part number SF1216BA02526S idt ? saw products ? 324 clark street, worcester, ma 01606, usa ? ph 1-508-852-5400 ? fax 1-508-852-8456 www.idt.com dsSF1216BA02526S rev x2 25-jult-07 page 3 of 4 package outline pin configuration 1 balanced input 2 balanced input 3 ground 4 package ground 5 balanced output 6 balanced output 7 ground 8 package ground dimensions are in mm
1216 mhz saw filter 8 mhz bandwidth part number SF1216BA02526S idt ? saw products ? 324 clark street, worcester, ma 01606, usa ? ph 1-508-852-5400 ? fax 1-508-852-8456 www.idt.com dsSF1216BA02526S rev x2 25-jult-07 page 4 of 4 tape and reel dimensions 1,000 pcs per reel all specifications are believed to be accurate and reliable. ho wever, ics reserves the right to make changes without notice. ? 2005 integrated circuit systems, inc. all rights reserved.
|
