document number: 31511 for technical questions, contact: ff2aresistors @vishay.com www.vishay.com revision: 07-jun-10 1 thick film resistor networks, dual-in-line, molded dip mdp 01, 03, 05 vishay dale features ? isolated, bussed and dual terminator schematics available ? 0.160" (4.06 mm) maximu m seated height and rugged, molded case construction ? thick film resistive elements ? low temperature coefficient (- 55 c to + 125 c) 100 ppm/c ? reduces total assembly costs ? compatible with automatic inserting equipment ? wide resistance range (10 to 2.2 m ) ? uniform performance characteristics ? available in tube pack ? compliant to rohs directive 2002/95/ec notes (1) for resistor power ratings at + 25 c see derating curves (2) tighter tracking available (3) 2 % standard, 1 % and 5 % available * pb containing terminations are not rohs compliant, exemptions may apply standard electrical specifications global model/ no. of pins schematic power rating element (1) p 70 c w resistance range tolerance (3) % temperature coefficient (- 55 c to + 125 c) ppm/c tcr tracking (2) (- 55 c to + 125 c) ppm/c weight g mdp 14 01 03 05 0.125 0.250 0.125 10 to 2.2m 10 to 2.2m consult factory 1, 2, 5 100 50 50 100 1.3 mdp 16 01 03 05 0.125 0.250 0.125 10 to 2.2m 10 to 2.2m consult factory 1, 2, 5 100 50 50 100 1.5 mdp e04 = lead (p b )-free, t ub e new global part numberin g : mdp1403100rgd04 (preferred part numberin g format) historical part number example: mdp1403101g (will continue to be accepted) mdp14 0310 0rgd04 global part number information global model pi n cou n t schematic tolera n ce code special f = 1 % g = 2 % j = 5 % s = special blank = standard (dash nu m b er) (up to 3 digits) from 1 to 999 as applica b le historical model pi n cou n t schematic resista n ce v alue d04 = tin/lead, t ub e r = k = k m = m 10r0 = 10 680k = 680 k 1m00 = 1.0 m 14 = 14 pin 16 = 16 pin tolera n ce code packagi n g mdp 14 03 101 g d04 01 = b u ssed 03 = isolated 00 = special resista n ce v alue packagi n g mdp e04 = lead (p b )-free, t ub e new global part numberin g : mdp1405121cgd04 (preferred part numberin g format) historical part number example: mdp1405221271g (will continue to be accepted) mdp14 0512 1cgd04 global model pi n cou n t schematic tolera n ce code special f = 1 % g = 2 % j = 5 % blank = standard (dash nu m b er) (up to 3 digits) from 1 to 999 as applica b le historical model pi n cou n t schematic resista n ce v alue 1 d04 = tin/lead, t ub e 14 = 14 pin 16 = 16 pin mdp 14 05 221 05 = d u al terminator resista n ce v alue packagi n g 3 digit impedance code, follo w ed b y alpha modifier (see impedance codes ta b le) packagi n g d04 resista n ce v alue 2 tolera n ce code 271 g
mdp 01, 03, 05 vishay dale thick film resistor networ ks, dual-in-line, molded dip www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31511 2 revision: 07-jun-10 dimensions in inches (millimeters) 0.010 + 0.005 - 0.002 (0.254 + 0.127 - 0.051) 0.250 0.005 (6.35 0.127) 0.310 0.010 (7.87 0.254) 0.290 min. 0.320 nom. 0.360 max. (7.37 min. 8.13 nom. 9.14 max.) pin #1 non-accumulative tol. "c" spaces a 0.010 (0.254) 0.030 (0.762) typ. 0.100 0.010 (2.54 0.254) 0.075 0.015 (1.90 0.381) 0.120 0.005 (3.05 0.127) 0.130 + 0.015 - 0.010 (3.30 + 0.381 - 0.254) 0.050 0.005 (1.27 0.127) 0.018 0.003 (0.457 0.076) b 0.010 (0.254) pin #1 identification global model a b c mdp 14 0.750 (19.05) 0.600 (15.24) 6 mdp 16 0. 8 50 (21.59) 0.700 (17.7 8 )7 technical specifications parameter unit mdp14 mdp16 package power rating (maximum at + 70 c) w 1.73 1.92 voltage coefficient of resistance v eff < 50 ppm typical dielectric strength v ac 200 insulation resistance > 10 000m minimum operating temperature range c - 55 to + 125 storage temperature range c - 55 to + 150 mechanical specifications marking resistance to solvents permanency testing per mil-std-202, method 215 solderability per mil-std-202, method 20 8 e body molded epoxy terminals solder plated leads weight 14 pin = 1.3 g; 16 pin = 1.5 g impedance codes code r1 ( ) r2 ( )code r1 ( ) r2 ( ) 500b 8 2 130 141a 270 270 750b 120 200 1 8 1a 330 390 8 00c 130 210 191a 330 470 990a 160 260 221b 330 6 8 0 101c 1 8 02402 8 1b 560 560 111c 1 8 02703 8 1b 560 1.2k 121b 1 8 0 390 501c 620 2.7k 121c 220 270 102a 1.5k 3.3k 131a 220 330 202b 3k 6.2k
document number: 31511 for technical questions, contact: ff2aresistors@vishay.com www.vishay.com revision: 07-jun-10 3 mdp 01, 03, 05 thick film resistor networ ks, dual-in-line, molded dip vishay dale note ? standard e24 resistance values stocked. consult factory. circuit applications 01 schematic 13 and 15 resistors with one pin common the mdpxx01 circuit provides a choice of 13 and 15 nominally equal resistors, each connected between a common pin (14 and 16) and a discrete pc board pin. commonly used in the following applications: ? mos/rom pull-up/pull-down ? ttl input pull-down ? open collector pull-up ? digital pulse squaring ? "wired or" pull-up ? ttl unused gate pull-up ? power driven pull-up ? high speed parallel pull-up 03 schematic 7 and 8 isolated resistors the mdpxx03 provides a choice of 7 and 8 nominally equal resistors, each resistor isolated from all others and wired directly across. commonly used in the following applications: ? "wired or" pull-up ? long-line impedance balancing ? power driven pull-up ? led current limiting ? powergate pull-up ? ecl output pull-down ? line termination ? ttl input pull-down 05 schematic ttl dual-line terminator; pulse squaring the mdpxx05 circuit contains 12 and 14 series pair of resistors. each series pair is connected between ground and a common line. the junction of these resistor pair s is connected to the input terminals. the 05 circuits are designed for tt l dual-line termination and pulse squaring. ? ? ? ? ? ? ? ? pin #1 mdp1401 mdp1601 mdp1603 mdp1403 pin #1 mdp1405, mdp1605 pin #1 r1 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r2 r1 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r2 16 pin packa g e 14 pin packa g e sin g le resistor 03 01 and 05 3.00 2.70 0.380 0.190 - 50 + 25 + 70 + 125 + 150 deratin g ambient temperature c power ratin g (w)
mdp 01, 03, 05 vishay dale thick film resistor networ ks, dual-in-line, molded dip www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31511 4 revision: 07-jun-10 performance test conditions max. r (typical test lots) power conditioning 1.5 rated power, applied 1.5 h ?on? and 0.5 h ?off? for 100 h 4 h at + 25 c ambient temperature 0.50 % r thermal shock 5 cycles between - 65 c and + 125 c 0.50 % r short time overload 2.5 x rated working voltage 5 s 0.25 % r low temperature operation 45 min at full rated working voltage at - 65 c 0.25 % r moisture resistance 240 h with humidity ranging from 8 0 % rh to 9 8 % rh 0.50 % r resistance to soldering heat leads immersed in + 350 c solder to within 1/16" of device body for 3 s 0.25 % r shock total of 1 8 shocks at 100 g 's 0.25 % r vibration 12 h at maximum of 20 g 's between 10 hz and 2000 hz 0.25 % r load life 1000 h at + 70 c, rated power applied 1.5 h ?on, 0.5 h ?off? for full 1000 h period. derated according to the curve. 1.00 % r terminal strength 4.5 pound pull for 30 s 0.25 % r insulation resistance 10 000 m (minimum) - dielectric withstanding voltage no evidence of arci ng or damage (200 v rms for 1 min) -
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
