a78 1.27mm pitch connector fx1 series din duplex density mount has been achieved. (din 96 contacts and fx1 192 (96x2) photo 1 sequence structure (pin contact sequence) 1 2 row b row a, row c *fx1 series (2 step sequence) figure 2 setting row b to ground, if active cable insertion and extraction are performed as power supply, arc will occur between contact and contact. the row b contact structure is constructed to separate arc occurrence point a and normal contact point b, and minimizes affects on the contact. features 1. high density and space saved-din duplex mount achieved the alignment of the mating area in 4-row allows to duplex the number of contacts in the nearly equivalent mount square as for the conventional din connector.(refer to photo (1).) 2. high current and high voltage two-thirds of total contact numbers are used for half pitch signaling contact, while the other one-third thereof is used for the power ground contact. power ground contact corresponds to high current (1a) and high voltage (250v). 3. sequence structure considering insertion/extraction in active power mode and maintenance on the end user side, the fx1 series is designed in a mechanism that can afford the time different contact at two steps. (for details, refer to figure (2) as shown on the right.) 4. mis-insertion prevent provide the insertion guide on both ends of connector, and widen an inductive area in order to prevent mis-insertion. c2 c2 c1 b2 b1 a2 a1 c1 b2 b1 a2 a1 24.4 13.69 1.8 2.5 2.8 2.2 1 10 (effective contact length) (contact start position) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a79 fx1 series 1.27mm pitch connector product specifications rating current rating voltage rating signal contact: 0.5a signal contact: 125v ac operating temperature range-55 to 85 ? (note 1) storage temperature range -10 to +60 ? (note 2) power supply contact: 1a power supply contact: 250v ac operating humidity range - 40 to 80 % operating humidity range - 40 to 70 % (note 2) item specification condition 1. insulation resistance 1000m ohms min. 250v dc 2. withstanding voltage no flashover or insulation breakdown. 1 minute signal contact 300v ac power supply contact 600v ac 3. contact resistance 60m ohms max. (conductor resistance included) 100ma 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) contact resistance: 70m ohms max. 96 hours at temperature of 40? and humidity of 90% to 95% insulation resistance: 1000m ohms min. 6. temperature cycle contact resistance: 70m ohms max. (-55 ? : 30 minutes 15- to 35 ? : 5 minutes max. insulation resistance: 1000m ohms min. (- 85 ? : 30 minutes 15- to 35 ? : 5 minutes max.) 5 cycles 7. durability (mating/un-mating) contact resistance: 70 m ohms max. 500 cycles material contact prefixed pin insulator straight header right angle header receptacle header receptacle brass phosphor bronze phosphor bronze phosphor bronze pps pps/ ptb contact area:tin plated lead area:tin plated tin plated black ________ ________ ul94v-0 parts material finish remarks fx1 series note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a80 fx1 series 1.27mm pitch connector ordering information fx1 - 192 p - 1.27 dsa l qe wrty r contact pitch: 1.27mm t contact type: ds : right angle dsa : straight y l: board prefixed pin q series name : fx1 w number of contacts : 144, 192, 216 e connector type : p-header : s-receptacle fx1 series note: the cleaning type only is applied on the header side to fx1 series. b application pattern the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a81 fx1 series 1.27mm pitch connector receptacle : right angle type b pcb mounting pattern applicable board thickness t=1.6mm fx1 series rohs yes c d part number cl no. b a number of contacts 144 192 216 73.29 93.61 103.77 68.08 88.4 98.56 59.69 80.01 90.17 ____ 67.31 ____ 87.63 ____ 97.79 fx1-144s-1.27ds(71) fx1-144s-1.27dsl(71) fx1-192s-1.27ds(71) fx1-192s-1.27dsl(71) fx1-216s-1.27ds(71) fx1-216s-1.27dsl(71) 571-0003-7-71 571-0053-5-71 571-0004-0-71 571-0054-8-71 571-0005-2-71 571-0055-0-71 unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a82 fx1 series 1.27mm pitch connector header : straight type b pcb mounting pattern applicable board thickness t=1.6mm c rohs part number cl no. b a number of contacts 144 192 216 73.29 93.61 103.77 59.69 80.01 90.17 ____ 69.85 ____ 90.17 ____ 100.33 yes fx1-144p-1.27dsa(71) fx1-144p-1.27dsal(71) fx1-192p-1.27dsa(71) fx1-192p-1.27dsal(71) fx1-216p-1.27dsa(71) fx1-216p-1.27dsal(71) 571-0303-0-71 571-0353-9-71 571-0304-3-71 571-0354-1-71 571-0305-6-71 571-0355-4-71 unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a83 fx1 series 1.27mm pitch connector header : right angle type b pcb mounting pattern applicable board thickness t=1.6mm rohs yes part number cl no. number of contacts 144 fx1-144p-1.27ds(71) fx1-144p-1.27dsl(71) 571-0203-6-71 571-0253-4-71 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a84 fx1 series 1.27mm pitch connector b precautions 1. soldering (1)in the case of manual soldering, complete services under the condition of soldering iron bit temperature below 360 ? for 5 seconds max. please be sure to coat the contacts with solder so that no force is given. (2)in the case of dip soldering bath, complete service under the condition of soldering iron bit temperature below 260 ? for 10 seconds max. 2. prefixed function if the prefixed function is required, please use to the board prefixed pin type. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
