specifications item symbol conditions min. max. units output frequency range note1 f1 primary output/ #2 h-level or open 10 800 mhz f2 secondary output/ #2 l-level 10 800 mhz frequency tolerance @v c =+ 1.65v f _tol initial tolerance, operating tem - perature range, rated power supply voltage change, aging (1 year @25 c), shock and vibration op. temp.: - 40 to + 85 c - 50 + 50 10 - 6 absolute pull range apr 100 10 - 6 control voltage v c 0 + 3.3 v storage temperature range t _stg - 55 + 125 c operating temperature range t _use - 40 + 85 c max. supply voltage - 0.5 + 4.2 v supply voltage v cc + 2.97 + 3.63 v linearity v c = 0v to + 3.3v - 10 + 10 % current consumption i cc 100 ma symmetry sym 50ohm @crossing point 45 55 % rise/ fall time (20% to 80% output level) tr/ tf 50ohm 0.4 ns low level output voltage note2 v ol v cc - 1.620 v high level output voltage note2 v oh v cc - 1.025 v output load lv-pecl output 50 ohm low level input voltage v il 30% v cc v high level input voltage v ih 70% v cc v input resistance 150 k ohm start-up time t _str @minimum operating voltage to be 0 sec. 10 ms phase jitter j phase 12khz to 20mhz @622.08mhz 1.0 ps phase noise @622.08mhz - 40 (@10hz offset) - 70 (@100hz offset) - 95 (@1khz offset) - 105 (@10khz offset) - 105 (@100khz offset) - 125 (@1mhz offset) - 135 (@10mhz offset) dbc/ hz note : all electrical characteristics are defined at the maximum load and operating temperature range. note1: please contact us for inquiry about operating temperature range, available frequencies and other conditions. note2: dc characteristic voltage controlled crystal oscillators (vcxo) surface mount type KV7050G-P3 series dual selectable cmos/ 3.3v/ 7.0 5.0mm rohs compliant features ? high frequency to 800mhz ? dual selectable ? lv-pecl output ? miniature ceramic package ? highly reliable with seam welding ? for wdm, networking applications table 1 freq. tol. operating temperature range ( c) note code 10 - 6 g 50 - 40 to + 85 standard specifications with only cer - tain frequencies how to order kv7050g 622a644 p 3 g f 00 type (7.0 5.0mm smd vcxo) output frequency/ selection frequency output type (lv-pecl) supply voltage (3.3v) frequency tolerance (see table 1) symmetry (45/ 55%) customer special model suffix (std specification is 00) packaging (tape & reel 1000 pcs./ reel) dimensions (unit: mm) recommended land pattern (unit: mm) plating: ni+au tolerance: 0.2 frequency select function pad2 pad4/ pad5 (output) open primary freq. "h" level primary freq. "l" level secondly freq. pad connections #1 v c #2 frequency select #3 case gnd #4 output #5 complementary output #6 v cc 7.0 5.0 1.6 0.85 2.46 1.4 0.6 1.17 2.54 2.54 #3 #1 #6 #4 #2 #5 5.08 1.6 3.6 1.6 2.54 note: a capacitor of value 0.01 f between v cc and gnd is recommended.
|