1 technical data sheet 75 ohm smb positive snap plug right angle connector crimp/solder attachment for rg180, rg195 confguration connector smb positive snap plug connector interface type rg180,rg195 cable attachment method (shield/contact) crimp/solder body style right angle electrical specifcations impedance, ohms 75 mechanical specifcations size length, in [mm] 0.88 [22.35] width/dia., in [mm] 0.4 [10.16] height, in [mm] 0.88 [22.35] . weight, lbs [g] 0.027 [12.25] connector type smb positive snap plug contact material and plating gold body material and plating brass, nickel dielectric type ptfe compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level 75 ohm smb positive snap plug right angle connector crimp/solder attachment for rg180, rg195 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 75 ohm smb positive snap plug right angle connector crimp/solder attachment for rg180, rg195 PE44446 url: http://www.pasternack.com/smb-positive-snap-plug-standard-rg180-rg195-connector-PE44446-p.aspx PE44446 PE44446 rev 01 75 ohm smb positive snap plug right angle connector crimp/solder attachment for rg180, rg195
? 2013 pasternack enterprises all rights reserved 2 PE44446 rev 01 dwg title PE44446 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. strip cable as shown & slide ferrule over cable. 2. install cable into body of connector and soft solder center conductor in place. 3. crimp ferrule & press cap down. assembly procedures ferrule: .178" hex crimp tool crimp size required fscm no. 53919 cad file 092804 scale n/a size a 127 75 ohm smb positive snap plug right angle connector crimp/solder attachment for rg180, rg195 PE44446 cad drawing
|
