tc4040bp/bf/bfn 2006-02-01 1 toshiba cmos digital integrated circuit silicon monolithic tc4040bp,TC4040BF,TC4040BFn tc4040b 12 stage ripple-carry binary counter/dividers tc4040b is 12 stage ripple carry binary counter having asynchronous clear function. this counter advances its counting stage by falling edge of clock input. when reset input is placed ?h?, all the circuits are reset regardless of clock input making all the outputs (q1 through q12) to be ?l?. this is most suitable for frequency dividers, control circuits and timing circuits. pin assignment truth table clock ? reset output state * h all outputs = ?l? l no change l advance to next state ? : level change * : don?t care note: xxxfn (jedec sop) is not available in japan. tc4040bp TC4040BF TC4040BFn weight dip16-p-300-2.54a : 1.00 g (typ.) sop16-p-300-1.27a : 0.18 g (typ.) sop16-p-300-1.27 : 0.18 g (typ.) sol16-p-150-1.27 : 0.13 g (typ.)
tc4040bp/bf/bfn 2006-02-01 2 logic diagram absolute maximum ratings (note) characteristics symbol rating unit dc supply voltage v dd v ss ? 0.5 to v ss + 20 v input voltage v in v ss ? 0.5 to v dd + 0.5 v output voltage v out v ss ? 0.5 to v dd + 0.5 v dc input current i in 10 ma power dissipation p d 300 (dip)/180 (soic) mw operating temperature range t opr ? 40 to 85 c storage temperature range t stg ? 65 to 150 c note: exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in ic performance or even destruction. recommended operating conditions (v ss = 0 v) (note) characteristics symbol test condition min typ. max unit dc supply voltage v dd ? 3 ? 18 v input voltage v in ? 0 ? v dd v note: the recommended operating conditions are required to ensure the normal operation of the device. unused inputs must be tied to either vcc or gnd.
tc4040bp/bf/bfn 2006-02-01 3 static electrical characteristics (v ss = 0 v) test condition ? 40c 25c 85c characteristics sym- bol v dd (v) min max min typ. max min max unit high-level output voltage v oh ? i out ? < 1 a v in = v ss , v dd 5 10 15 4.95 9.95 14.95 ? ? ? 4.95 9.95 14.95 5.00 10.00 15.00 ? ? ? 4.95 9.95 14.95 ? ? ? v low-level output voltage v ol ? i out ? < 1 a v in = v ss , v dd 5 10 15 ? ? ? 0.05 0.05 0.05 ? ? ? 0.00 0.00 0.00 0.05 0.05 0.05 ? ? ? 0.05 0.05 0.05 v v oh = 4.6 v v oh = 2.5 v v oh = 9.5 v v oh = 13.5 v 5 5 10 15 ? 0.61 ? 2.50 ? 1.50 ? 4.00 ? ? ? ? ? 0.51 ? 2.10 ? 1.30 ? 3.40 ? 1.0 ? 4.0 ? 2.2 ? 9.0 ? ? ? ? ? 0.42 ? 1.70 ? 1.10 ? 2.80 ? ? ? ? output high current i oh v in = v ss , v dd ma v ol = 0.4 v v ol = 0.5 v v ol = 1.5 v 5 10 15 0.61 1.50 4.00 ? ? ? 0.51 1.30 3.40 1.5 3.2 12.0 ? ? ? 0.42 1.10 2.80 ? ? ? output low current i ol v in = v ss , v dd ma v out = 0.5 v, 4.5 v v out = 1.0 v, 9.0 v v out = 1.5 v, 13.5 v 5 10 15 3.5 7.0 11.0 ? ? ? 3.5 7.0 11.0 2.75 5.50 8.25 ? ? ? 3.5 7.0 11.0 ? ? ? input high voltage v ih ? i out ? < 1 a v v out = 0.5 v, 4.5 v v out = 1.0 v, 9.0 v v out = 1.5 v, 13.5 v 5 10 15 ? ? ? 1.5 3.0 4.0 ? ? ? 2.25 4.50 6.75 1.5 3.0 4.0 ? ? ? 1.5 3.0 4.0 input low voltage v il ? i out ? < 1 a v ?h? level i ih v ih = 18 v 18 ? 0.1 ? 10 ? 5 0.1 ? 1.0 input current ?l? level i il v il = 0 v 18 ? ? 0.1 ? ? 10 ? 5 ? 0.1 ? ? 1.0 a quiescent supply current i dd v in = v ss , v dd (note) 5 10 15 ? ? ? 5 10 20 ? ? ? 0.005 0.010 0.015 5 10 20 ? ? ? 150 300 600 a note: all valid input combinations.
tc4040bp/bf/bfn 2006-02-01 4 dynamic electrical characteristics (ta = 25c, v ss = 0 v, c l = 50 pf) test condition characteristics symbol v dd (v) min typ. max unit output transition time (low to high) t tlh ? 5 10 15 ? ? ? 70 35 30 200 100 80 ns output transition time (high to low) t thl ? 5 10 15 ? ? ? 70 35 30 200 100 80 ns propagation delay time ( clock -q1) t plh ? 5 10 15 ? ? ? 160 80 65 360 160 130 ns propagation delay time ( clock -q1) t phl ? 5 10 15 ? ? ? 160 80 65 360 160 130 ns propagation delay time ( clock -q12) t plh ? 5 10 15 ? ? ? 900 450 360 1800 900 720 ns propagation delay time ( clock -q12) t phl ? 5 10 15 ? ? ? 900 450 360 1800 900 720 ns propagation delay time (reset-q) t phl ? 5 10 15 ? ? ? 150 70 50 280 120 100 ns max clock frequency f cl ? 5 10 15 3.5 8.0 12.0 10 20 25 ? ? ? mhz min clock pulse width t w ? 5 10 15 ? ? ? 50 20 15 140 60 40 ns min pulse width (reset) t w ? 5 10 15 ? ? ? 100 40 30 200 80 60 ns min removal time (reset- clock ) t rem ? 5 10 15 ? ? ? ? ? ? 350 150 100 ns max clock input rise time max clock input fall time t rcl t fcl ? 5 10 15 no limit s input capacitance c in ? ? 5 7.5 pf
tc4040bp/bf/bfn 2006-02-01 5 waveforms for measurement of dynamic characteristics waveform 1 waveform 2
tc4040bp/bf/bfn 2006-02-01 6 package dimensions weight: 1.00 g (typ.)
tc4040bp/bf/bfn 2006-02-01 7 package dimensions weight: 0.18 g (typ.)
tc4040bp/bf/bfn 2006-02-01 8 package dimensions weight: 0.18 g (typ.)
tc4040bp/bf/bfn 2006-02-01 9 package dimensions (note) note: this package is not available in japan. weight: 0.13 g (typ.)
tc4040bp/bf/bfn 2006-02-01 10 note: lead (pb)-free packages dip16-p-300-2.54a sop16- p-300-1.27a sol16-p-150-1.27 restrictions on product use 060116eba ? the information contained herein is subject to change without notice. 021023_d ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utiliz ing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handli ng guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc. 021023_a ? the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. 021023_b ? the products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_q ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringements of patents or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of toshiba or others. 021023_c ? the products described in this document are subject to the foreign exchange and foreign trade laws. 021023_e
|
