narrow-pitch connectors axn(5/6) ordering information 0.5 mm pitch ?ating structure type with high resistance to twisting narrow pitch (0.5mm) connectors p5 series ?floating type features 1. the 0.5mm pitch stacking connector with a built-in ?ating mechanism. 2. further reduction of equipment size is now possible. 3. the original structure ensures higher reliability performance for both electrical and mechanical connections. flux-creeping prevention structure (header) simple lock mechanism 4. automatic mounting embossed tape packaging is standard. 5. porosity treatment applied for improved resistance against corrosion applications small mobile equipment, such as mobile phones, phss, and pdas socket header compliance with rohs directive 6.83 6.8 25.9 14.9 approx. 43% reduction in base area p8 series with 50 contacts (0.8mm pitch) p5 series with 50 contacts (0.5mm pitch) 0.15mm0.15mm so cket header header side: two-piece structure ?floating structure what is a floating structure? the header is a two-piece structure that can absorb any variation caused when a connector (header and socket) is integrated into a printed circuit board. (when two sets of connectors are used as shown below, a maximum deviation of 0.3mm can be absorbed.) mated direction / mated height 0: for smd vertical mating, mated height 5.0 mm 5: for smd vertical mating, mated height 5.0 mm surface treatment (contact portion / terminal portion) 5: ni plating on base, au plating on surface / ni plating on base, au plating on surface number of contacts (2 digits) pac king g: 1,000 pieces embossed tape and plastic reel 2 5: narrow pitch connector p5 floating type (0.5 mm pitch) socket 6: narrow pitch connector p5 floating type (0.5 mm pitch) header functions 4: without soldering terminal, without positioning bosses 8: with floating function, without soldering terminal, without positioning bosses axn 5 g panasonic-electric-works.net/ac
narrow-pitch connectors axn(5/6) product types note) connectors are available in a standard embossed tape package (1,000 pcs/lot). minimum ordering quantity is a single reel. samples for mounting con?mation: available in units of 50 pieces. please consult us. (see ?egarding sample orders to con?m proper mounting on page 150.) samples: small lot orders for the above models are possible. specifications 1. characteristics 2. material and surface treatment dimensions (unit: mm) mated height no. of contacts part no. pac king quantity so cket header inner carton (1 reel) outer carton 5.0 mm 20 axn520045g AXN620585G 1,000 pcs. 2,000 pcs. 30 axn530045g axn630585g 40 axn540045g axn640585g 50 axn550045g axn650585g 60 axn560045g axn660585g 80 axn580045g axn680585g 100 axn500045g axn600585g item speci?ations conditions electrical characteristics rated current 0.2a rated voltage 60v ac/dc breakdown voltage 150v ac for 1 min. detection current: 1ma insulation resistance min. 1000m ? using 500v dc megger contact resistance max. 80m ? based on the contact resistance measurement method speci?d by jis c 5402. mechanical characteristics composite insertion force max. 0.981n {100gf} no. of contacts (initial) composite removal force min. 0.0785n {8gf} no. of contacts contact holding force min. 2.94n {300gf}/2 contacts measuring the maximum force. as the contact is axially pull out. environmental characteristics ambient temperature ?5 c to +85 c no freezing at low temperatures soldering heat resistance max. peak temperature of 245 c (on the surface of the pc board around the connector terminals) infrared re?w soldering 300 c within 5 seconds soldering iron thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 80m ? sequence 1. ?5 c, 30 minutes 2. ~ , max. 5 minutes 3. 85 c, 30 minutes 4. ~ , max. 5 minutes humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 80m ? bath temperature 40 2 c, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 80m ? bath temperature 35 2 c, saltwarter concentration 5 1% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 80m ? bath temperature 40 2 c, gas concentration 3 1 ppm, humidity 75 to 80% r.h. so 2 resistance (header and socket mated) 48 hours, contact resistance max. 80m ? bath temperature 40 2 c, gas concentration 10 3 ppm, humidity 90 to 95% r.h. lifetime characteristics insertion and removal life 20 times repeated insertion and removal speed of max. 200 times/hours unit weight 30 contacts; socket: 0.19g header: 0.32g 50 contacts; socket: 0.29g header: 0.50g pa rt name material surface treatment molded portion heat-resistant resin (ul94v-0) contact/post copper alloy contact portion: ni plating on base, au plating on surface te r minal portion: ni plating on base, au plating on surface (except for thick of terminal) 0 ? +3 0 the cad data of the products with a cad data mark can be downloaded from: http://panasonic-electric-works.net/ac ?socket dimension table (mm) no. of contacts a b 20 7.40 4.50 30 9.90 7.00 40 12.40 9.50 50 14.90 12.00 60 17.40 14.50 80 22.40 19.50 100 27.40 24.50 a b 0.1 c0.5 1.02 1.07 1.07 3.05 4.40 3.60 0.50 0.05 0.50 0.05 0.20 0.03 suction face 1.80 contact 60 0.10 contact 60 0.12 general tolerance: 0.2 recommended pc board pattern (top view) 5.40 b 0.05 0.50 0.05 0.50 0.05 0.25 0.05 0.75 0.05 0.125 0.05 1.46 0.05 cad data panasonic-electric-works.net/ac
narrow-pitch connectors axn(5/6) ?socket and header are mated embossed tape dimensions (unit: mm, common for respective contact type, socket and header) dimension table (mm) connector orientation with respect to direction of progress of embossed tape mated height no. of contacts type of taping a b c d quantity per reel socket and header are common: 5.0mm 20 to 60 tape i 24.0 11.5 25.4 1,000 80 tape ii 32.0 28.4 14.2 33.4 1,000 100 tape ii 44.0 40.4 20.2 45.4 1,000 ?header dimension table (mm) no. of contacts a b 20 7.40 4.50 30 9.90 7.00 40 12.40 9.50 50 14.90 12.00 60 17.40 14.50 80 22.40 19.50 100 27.40 24.50 a b 0.1 c0.5 6.80 0.750.75 3.88 max.6.00 4.40 suction face 1.80 0.50 0.05 0.50 0.05 0.20 0.03 contact 60 0.10 contact 60 0.12 general tolerance: 0.2 recommended pc board pattern (top view) b 0.05 0.50 0.05 0.50 0.05 0.25 0.05 0.75 0.05 0.125 0.05 3.80 0.1 resist is recommended 4.50 0.1 7.80 resist is recommended cad data 5.00 0.3 ?tape dimensions (conforming to jis c 0806-1990. however, some tapes have mounting hole pitches that do not comply with the standard.) tape i tape ii 1.75 c 12.0 a 0.3 4 2 1.5 dia. +0.1 0 pull out direction 1.75 c 12.0 a 0.3 4 2 pull out direction b 1.5 dia. +0.1 0 ?plastic reel dimensions (conforming to eiaj et?200b) d 1 top cover tape taping reel embossed carrier tape embossed mounting-hole 380 dia. type direction of tape progress common for p5 floating type socket header this corner is oriented on the c side. this corner is oriented on the c side. panasonic-electric-works.net/ac
narrow-pitch connectors axn(5/6) notes 1. preventing vibration and shock to prevent the pc board from drop-off faults and to protect soldered spots from direct stress, use vibration-proof pads across boards. fix the pc boards in place or install a stopper so that the gap between the connectors is less than 0.5 mm and that their mating is level. 2. prevention of reverse mating the socket and header are protected from reverse mating by a molded resin key . excessive mating force may damage the key, so be sure to match chamfered corners when mating. ?floating type 3. static electricity this type of socket has the terminals exposed from the connector walls, and therefore if they are touched with anything metal, a short circuit will occur. also, if the terminals are touched by hand, the static electricity may damage the ic. 4. about ?ating-type connectors (1) when two ?ating-type connectors are used on header, distance tolerance between connectors is 0.3mm max. (2) if rotational error exists between two connectors, distance tolerance between the two connectors is as follows: however, a1 is mated with a2, and b1 is mated with b2. (3) please consult us regarding allowable installation pitch tolerance between connectors when using two connectors that have differing number of terminals. parallel max. 0.5 mm gap when mated chamfered corner mating state a a. horizontal b. vertical a b b b 1 b 2 a 1 a 2 for other details, please verify with the product speci?ation sheets. panasonic-electric-works.net/ac
|
