pcs3p6200a spread spectrum emi r eduction ic for hd display ?2010 scillc. all rights reserved. publication order number: january 2010 C rev. 1 pcs3p6200 /d features clock generator for display systems wide operating frequency range covering most of the pixel frequencies generates a low emi 1x output frequency range: 25mhz - 120mhz 4 frequency deviation selection options: 1.50 %, 1 .25 %, 0. 7 5%, 1. 00 % supply voltage : 3.3v 0.3v 2.5v 0.125v modrate 85khz @ 72mhz 6 pin t sot - 26 package commercial , in dustrial and extended industrial temperature range product description pcs3p6200a is a versatile spread spectrum modulator designed specifi cally for a wide range of clock frequencies. the device addresses the need of a low emi clock generator for use in display systems covering wide choice of pixel frequencies. pcs3p6200a reduces electromagnetic interference (emi) at the clock source, allowi ng system wide reduction of emi of all clock dependent signals. pcs3p6200a allows significant system cost savings by reducing the number of circuit board layers, ferrite beads, shielding that are traditionally required to pass emi regulations. the supply v oltage of the device is 3.3v/2.5v. it has two spread selection pins, ss1% and ss2% to select among the four possible deviation options. the frequency deviation across the frequency range remains within 10% of the selected deviation . refer to the frequency deviation selection table for details . the device is available in a 6 pin tsot - 26 package, over commercial, industrial and extended industrial temperature range. application pcs3p6200a is targeted for use in a broad range of applications including liquid crystal and plasma displays . block diagram vss vdd clkin modout pll ss1% ss2%
pcs3p62 00a rev. 1 | page 2 of 7 | www.onsemi.com pin configuration (6l t sot - 26 package) pin description pin# pin name type description 1 clkin i external reference clock input. 2 vss p ground to entire chip. 3 modout o modulated frequency output. 4 ss1% i frequency deviation selection. refer to frequency deviation selection table for details. has an internal pull - up resistor. 5 ss2% i frequency deviation selection. refer to frequency deviation selection table for details. has an internal pull - up resistor. 6 vdd p power to entire chip. frequency deviation selection table ss2% ss1% frequency deviation l l 1.50 % l h 1 .25 % h l 0. 7 5% h h 1. 00 % vss clkin vdd 6 5 4 1 2 3 pcs3p6200a modout ss1% ss2%
pcs3p62 00a rev. 1 | page 3 of 7 | www.onsemi.com absolute maximum ratings symbol parameter rating unit v dd , v in vol tage on any pin with respect to ground - 0.5 to + 4.6 v t stg storage temperature - 65 to +125 c t s max. soldering temperature (10 sec) 260 c t j junction temperature 150 c t dv static discharge voltage (as per jedec std22 - a114 - b) 2 kv note: these are s tress ratings only and are not implied for functional use. exposure to absolute maximum ratings for prolonged periods of time may affect device reliability. operating conditions for 2.5v and 3.3v supply voltage parameter description min max u nit v dd ( 2.5) supply voltage 2.375 2.625 v v dd ( 3.3) 3.0 3.6 t a operating temperature commercial 0 +70 c industrial - 40 +85 extended industrial - 40 +105 c l load capacitance 15 pf dc electrical characteristics for 2.5v supply symbol parameter min typ max unit v il input low voltage vss - 0.3 0. 7 v v ih input high voltage 1.7 vdd + 0.3 v i il input low current - 35 a i ih input high current 35 a v ol output low voltage (vdd = 2.5v, i ol = 8 ma) 0.6 v v oh output high volt age (vdd = 2.5v, i oh = - 8 ma) 1.8 v i dd static supply current 1 4 m a i cc dynamic supply current, unloaded output 9 11 ma v dd operating voltage 2.375 2.5 2.625 v t on power - up time (first locked cycle after power - up) 3 ms c in input capacitance 5 pf z out output i mpedance 40 ? note: 1. clkin pin is pulled low .
pcs3p62 00a rev. 1 | page 4 of 7 | www.onsemi.com ac electrical characteristics for 2.5v supply symbol parameter min typ max unit clkin input frequency 25 120 mhz modout output frequency 25 120 mhz t lh 1 output rise time (measure d from 0.7v to 1.7v) 2 2.7 ns t hl 1 output fall time (measured from 1.7v to 0.7v) 1 1.5 ns t jc jitter (cycle - to - cycle) 250 300 ps t d output duty cycle 40 50 60 % note: 1. t lh and t hl are measured into a capacitive load of 15pf . dc electrical char acteristics for 3.3v supply symbol parameter min typ max unit v il input low voltage vss - 0.3 0.8 v v ih input high voltage 2.0 vdd + 0.3 v i il input low current - 35 a i ih input high current 35 a v ol output low voltage (vdd = 3.3v, i ol = 8 ma) 0.4 v v oh output high voltage (vdd = 3.3v, i oh = - 8 ma) 2.5 v i dd static supply current 1 4.5 m a i cc dynamic supply current, unloaded output 11 14 ma v dd operating voltage 3.0 3.3 3.6 v t on power - up time (first locked cycle after power - up) 3 ms c in input capacitance 5 pf z out output i mpedance 35 ? note: 1. clkin pin is pulled low . ac electrical characteristics for 3.3v supply symbol parameter min typ max unit clkin input frequency 25 120 mhz modout output frequency 25 120 mhz t lh 1 output rise time (measured from 0.8 to 2.0v) 1.3 2 ns t hl 1 output fall time (measured at 2.0v to 0.8v) 0.9 1.3 ns t jc jitter (c ycle - to - cycle) 225 300 ps t d output duty cycle 45 50 55 % note: 1. t lh and t hl are measured into a capacitive load of 15pf . note: all parameters are at an extended industrial tem perature range unless otherwise stated .
pcs3p62 00a rev. 1 | page 5 of 7 | www.onsemi.com package information ( 6l tsot26 ) symbol dimensions inches millimeters min max min max a 0.0295 0.035 0.75 0.90 a1 0.00 0.0039 0.00 0.10 a2 0.0275 0.0314 0.70 0.80 b 0.0157 0.01 97 0.40 0.50 b1 0.0118 0.0157 0.30 0.40 c 0.0031 0.0078 0.08 0.20 d 0.1141 2.90 ref e 0.1023 0.1181 2.60 3.00 e1 0.0590 0.0069 1.50 1.70 e 0.0374 0.95 bsc e1 0.0748 1.90 bsc l 0.0118 0.0236 0.30 0.60 l1 0.0236 ref 0.60 ref l2 0.0098 bsc 0.25 bsc r 0.0039 .. 0.10 .. r1 0.0039 0.0098 0.10 0.25 0 8 0 8 y . 0.0039 . 0.10
pcs3p62 00a rev. 1 | page 6 of 7 | www.onsemi.com ordering code part number marking package type temperature pcs3p6200ag - 06jr ac4ll 6 - pin tsot - 26 , tape & reel, green commercial pcs3i6200ag - 06jr ac 2 ll 6 - pin tsot - 26 , tape & reel, green industrial pcs3e6200ag - 06jr ac 5 ll 6 - pin tsot - 26 , tape & reel, green extended industrial ll = 2 character lot # device ordering information p c s 3 p 6 2 0 0 a g - 0 6j r licensed under u.s patent # 5,488,627 and # 5,631,921 o = tsot23 u = msop j= tsot26 s = soic e = tqfp t = tssop l = lqfp a = ssop u = msop v = tvsop p = pdip b = bga d = qsop q = qfn x = sc - 70 device pin count x= automotive i= industrial p or n/c = commercial ( - 40c to +125c) ( - 40c to +85c) (0c to +70c) e= extended industrial ( - 40 c to +105c) 1 = clock generator 6 = power management 2 = non pll based 7 = power management 3 = emi reduction 8 = power management 4 = ddr support products 9 = hi performance 5 = std zero delay buffer 0 = reserved on semiconductor mixed signal product part number f = lead free and rohs compliant part g = green package, lead free, and rohs r = tape & r eel, t = tube or tray
pcs3p62 00a note: this product ut ilizes us patent #6,646,463 impedance emulator patent issued to pulsecore semiconductor, dated 11 - 11 - 2003 . many on semiconductor products are protected by issued patents or applications for patent. on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitabili ty of its products for any particu lar purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifical ly disclaims any and all liability, including without limitation special, consequential or incidental damages. typical parame including typicals must be pu blication ordering information literature fulfillment: literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone: 303 - 675 - 2175 or 800 - 344 - 3860 toll free usa/canada fax: 303 - 675 - 2176 or 800 - 344 - 3867 toll free usa/c anada email: orderlit@onsemi.com n. american technical support : 800 - 282 - 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 - 3 - 5773 - 3850 on semiconductor website: www.onse mi.com order literature: http://www.onsemi.com/orderlit for additional informa tion, please contact your local sales representative
|
