146 coaxial line stretchers hls series features 1.three types of adjustable lengths adjustable lengths are available in these three types: 10 mm, 37.5 mm, and 75 mm. 2.high reliability stainless steel is used for the connector portion and the gold plating high reliability. hls-jp-3 hls-jj-13 hls-jj-1 hls-jj-11 these coaxial line stretchers maintain an impedance of 50 ? while changing the length of the coaxial tube and adjusting the phase. one type is locked after the adjustment and another type can be used in mechanical drive applications. these line stretchers are well suited for use in phase adjustment, impedance matching, and signal combining. product specifications ratings frequency range (note) characteristic impedance maximum input power dc to 10.0 ghz 50 ohms 50 w operating temperature range operating relative humidity -10 ? to +65 ? 95% max. note: the frequency range will depend on the model. item standard conditions 1.vibration 2.shock 3.temperature cycle no electrical discontinuity of 1 s or more no damage, cracks, or parts dislocation no damage, cracks, or parts dislocation frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 98 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis temperature: -30 ? +5 ? to +35 ? +70 ? +5 ? to +35 ? time: 30 15 max. 30 15 max. (minutes) 5 cycles the test method conforms to mil-std-202. materials ordering information part body connector body coupling female contact male contact insulator coaxial tube lock nut stainless steel brass stainless steel beryllium copper brass ptfe ut-141a semi-rigid cable brass gold plating gold plating gold plating gold plating gold plating ---------- gold plating gold plating material finish 1 2 hls - jj - 1 series name: hls connector coupling portion jp: jack/plug jj: jack/jack suffix 1 2 3 3 specifications part number frequency range (ghz) v.s.w.r. (max) length of travel (mm) power (w) weight (g) hls-jp-3 dc ~ 4 4 ~ 8 1.20 1.25 10 50 29 hls-jj-1 dc ~ 4 4 ~ 8 1.20 1.25 75 50 91 hls-jj-11 dc ~ 4 4 ~ 10 1.20 1.35 75 50 91 hls-jj-13 dc ~ 4 4 ~ 10 1.20 1.35 37.5 50 46 with an air transmission path the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
147 external dimensions typical data hls-jp-3 hls-jj-13 hls-jj-1 hls-jj-11 hls-jj-11 please use at the length of travel or shorter. 73 to 83 (length of travel 10) 128 to 166 (length of travel 37.5) lock nut 202 to 277 (length of travel 75) 203 to 278 (length of travel 75) maximum value when adjusted fully v.s.w.r. at maximum length lock nut 8 (spanner) 8 (spanner) 8 (spanner) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
148 coaxial variable phase shifters hls series features 1.adjustment screw variation method these coaxial phase shifters use a method in which the adjustment screw is varied to adjust the phase. phase adjustments are thereby permitted without adjusting the overall length.the adjustment screw is of the lock type and once locked there will be no shift of phase. 2.48 mm adjustable length the length of travel is 48 mm. hls - jj - 10 part number HLS-JJ-10 frequency range (ghz) dc ~ 1 1 ~ 2 2 ~ 4 v.s.w.r.(max) 1.2 1.3 1.5 insertion loss (db max) 0.3 0.4 0.5 length of travel (mm) with an air transmission path 48 power (w) 50 weight (g) 192 product specifications ratings frequency range characteristic impedance maximum input power dc to 4.0 ghz 50 ohms 50 w operating temperature range operating relative humidity -10 ? to +65 ? 95% max. item standard conditions 1.insulation 2.vibration 3.shock 4.temperature resistance cycle no electrical discontinuity of 1 s or more no damage, cracks, or parts dislocation no damage, cracks, or parts dislocation 1,000 m ohms min. frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 98 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis temperature: -30 ? +5 ? to +35 ? +70 ? +5 ? to +35 ? time: 30 15 max. 30 15 max. (minutes) 5 cycles 500 v dc the test method conforms to mil-std-202. materials ordering information part materials finish connector body stainless steel passivated body aluminum ---------- female contact beryllium copper gold plating male contact beryllium copper gold plating insulator ptfe ---------- adjustment screw brass nickel plating series name: hls connector coupling portion jj: jack/jack suffix 1 2 3 1 2 3 specifications external dimensions (for phase adjustment) (for fixing) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
149 coaxial variable phase shifters hls series features 1.adjustment screw variation method these coaxial phase shifters are adjusted by turning an adjustment screw which permits adjustment of the phase while maintaining an impedance of 50 ? . the adjustment screw is of the lock type and once locked there will be no shift of phase. 2.140 mm adjustable length the length of travel is 140 mm. 3.high reliability stainless steel is used in the connector portion and the gold plating guarantees high reliability. product specifications ratings frequency range characteristic impedance maximum input power dc to 4.0 ghz 50 ohms 50w operating temperature range operating relative humidity -10 ? to +65 ? 95% max. item standard conditions 1. insulation 2.vibration 3.shock 4.temperature resistance cycle no electrical discontinuity of 1 s or more no damage, cracks, or parts dislocation no damage, cracks, or parts dislocation 1000 m ohms min. 50 v dc frequency of 10 to 55 hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions acceleration of 98 m/s 2 , sine half-wave waveform, 3 cycles in each of the 3 axis temperature: -30 ? +5 ? to +35 ? +70 ? +5 ? to +35 ? time: 30 15 max. 30 15 max. (minutes) 5 cycles the test method conforms to mil-std-202. materials ordering information 1 2 hls - jj - 2 series name: hls connector coupling portion jj: jack/jack suffix 1 2 3 3 part connector body stainless steel gold plating nickel plating gold plating body female contact insulator brass beryllium copper ptfe ---------- material finish specifications part number frequency range (ghz) v.s.w.r. (max) length of travel (mm) power (w) weight (g) hls-jj-2 dc ~ 4 1.3 with an air transmission path 140 50 2 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
150 external dimensions relationship between shift length, delay time, and phase angle 234 to 304 (length of travel 70 2) shift length l (mm), delay time t (ns), frequency f (ghz), phase shift (deg) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
