61 optical connectors for 100mbps backbone lan hfdi series features applications lan, computer transfer systems, etc. 1.fddi specification these duplex connectors for use with multimode optical fiber are suited to 100 mbps backbone lan based on the fddi specification. 2. simple field work, simple product inventory use of a key block permits one type of main unit to correspond to 4 types of keys (a, b, m, and s). this convenience offers the following advantages: (1) in field work, having one kind of main unit and one key block will permit correspondence with all 4 types of keys (a, b, m, and s). (2) also in product inventory, stocking one kind of main unit and key blocks will permit correspondence with the various keys and simplify inventory work. 3.lock structure a slide lock cover system has been used which allows operation from whichever direction is desired. in this design the lock cover is not exposed which means the lock will not be accidentally released even if it is bumped. type a type m type b type s key-conversion type
62 rating operating temperature range - 25 ?~ 70 ? storage temperature range - 25 ?~ 85 ? material polybutylene terephthalate stainless steel zirconia polybutylene terephthalate copper alloy part name plug housing coil spring ferrule adapter housing split sleeve for ? 3mm zip cord hfdi-2p-ex for ? 4.8mm cable hfdi-2p-ex (01) for 5 x 3 oval cable hfdi-2p-ex (02) connectors with cable attached hfdi-hdfi hfdi-fc hfdi-sc ferrules for mm fiber hfdi-f36-b127 receptacles hfdi-2r-b conversion adapters fc conversion hfdi-exa-fc st conversion hfdi-exa-st item test method (jis c 5961) standard optical performance insertion loss reflection attenuation 0.3 db or less (pc) 0.7 db or less (flat) 22 db or greater (pc) 1,300nm wavelength (ld) 1,300nm wavelength (led) coupling force and separation force coupling force 39.2 n or less separation force 39.2 n or less measure when connectors are coupled and separated in the direction of the axis. cable clamp strength (pulling in direction of axis) 1) insertion loss fluctuation after test:0.2 db or less 2) no irregularity in clamp section or cable 70 n of pulling force between connector and cable vibration resistance vibration range of 10 to 55 hz, in 3 directions, 3 hours each shock resistance acceleration of 981 m/s2, in 3 directions, 3 times each humidity resistance (temperature and humidity cycle) temperature cycle temperature, -10? to 65? humidity 90 to 96% 10 cycles temperature -25 to 70? 100 cycles heat resistance leave for 960 hours at a temperature of 85? cold resistance leave for 960 hours at a temperature of -25? salt fog left in a 5% concentration of salt fog for 48 hours repetitive operation 1) insertion loss fluctuation after test:0.2 db or less 2) no damage, cracks, or part looseness no conspicuous corrosion 500 times mechanical performance environmental performance
63 type a b m s guide key arrangement (front diagram) plugs adapters/receptacles guide key arrangement (front diagram) plugs a b m s guide key arrangement (front diagram) adapters/receptacles a b m s recep tacle type plug type
64 hrs no. product number suitable cable cl705-0057-7 hfdi-2p-ex ? 3mm zip cable cl705-0057-7-01 hfdi-2p-ex(01) ? 4.8mm cable cl705-0057-7-02 hfdi-2p-ex(02) 5 x 3 oval cable hrs no. product number suitable optical fiber cl705-0043-2-01 hfdi-f36-b127 gi-50/125, gi-62.5/125 note: when using with guide key s, remove the guide key from the housing.
65 hrs no. product number guide key type cl705-0024-8 hfdi-2a-b none cl705-0025-0 hfdi-2a-b (a) a cl705-0026-3 hfdi-2a-b (b) b cl705-0027-6 hfdi-2a-b (m) m cl705-0028-9 hfdi-2a-b (s) s product number guide key type notes fddi to fc conversion adapter cl705-0016-0 hfdi-exa-fc none cl705-0017-2 hfdi-exa-fc (a) a cl705-0018-5 hfdi-exa-fc (b) b cl705-0019-8 hfdi-exa-fc (m) m cl705-0020-7 hfdi-exa-fc (s) s hrs no. cl705-0029-1 hfdi-exa-st none cl705-0030-0 hfdi-exa-st (a) a cl705-0031-3 hfdi-exa-st (b) b cl705-0032-6 hfdi-exa-st (m) m cl705-0033-9 hfdi-exa-st (s) s fddi to st conversion adapter product number guide key type notes hrs no.
66 type of polishing reflection attenuation cable diameter housing product number connector mounting end suitable optical fiber hfdi-fp1-f3bw-l one end hfdi-fp2-f3bw-l both ends hfdi-fp1-f3cw-l one end hfdi-fp2-f3cw-l both ends hfdi-sp1-f3bw-l one end hfdi-sp2-f3bw-l both ends hfdi-sp1-f3cw-l one end hfdi-sp2-f3cw-l both ends flat - hfdi-2p-ex ? 3 zip cord pc = > 22 connectors with cable attached l the guide key part will be appended. the "l" within the product number indicates the length of the cable illustrated in the diagram. please specify values in meter units. gi-50/125 gi-62.5/125 gi-50/125 gi-62.5/125 the guide key of the diagram is the s type.
67 l l product number product number hfdi-t1 hfdi-2p-ex ca041055-fbw-l gi-50/125 ca041055-fcw-l gi-62.5/125 ca041055-sbw-l gi-50/125 ca041055-scw-l gi-62.5/125 ca011055-fbw-l gi-50/125 ca011055-fcw-l gi-62.5/125 ca011055-sbw-l gi-50/125 ca011055-scw-l gi-62.5/125 flat pc - ? 3 zip cord hfdi-2p-ex or hrfc-p1-h = > 22 hrs no. suitable optical fiber type of polishing reflection attenuation cable diameter housing the guide key part will be appended. the "l" within the product number indicates the length of the cable illustrated in the diagram. please specify values in meter units. flat pc - ? 3 zip cord hfdi-2p-ex or hsc-ph3-a2 = > 22 hrs no. suitable optical fiber type of polishing reflection attenuation cable diameter housing the guide key part will be appended. the "l" within the product number indicates the length of the cable illustrated in the diagram. please specify values in meter units. the guide key of the diagram is the s type. the guide key of the diagram is the s type.
68
|
