smd chip inductor type 3611 series components meggitt electronic the very latest miniature wound inductors with a wide inductance and temperature range are supplied on 8mm wide tape and reeled in 2000 pieces. they are 1008 size inductors for automatic placement. these tiny 10.08 size inductors are wound on a ferrite bobbin core and encapsulated in a moulded epoxy resin and can be soldered and cleaned using all popular methods. high reliability attractively priced small size - 2.5 x 2.0mm (1008) temperature range -20c to +100c taped to iec 286 pt3 suitable for dip and wave solder inductance of 0.01 m m m m m h to 100 m m m m m h meggitt citec key features superior q characteristics sales action desk fax: (01793 611777) tel: (01793 611666) email: sales@megelec.co.uk web site: www.megelec.co.uk log no fo721 issue 5 4 pages 07-00 axial inductors smd inductors thin film printed inductors power chokes in radial and axial style meggitt sigma
specifications inductance code r22 r27 r33 r39 r47 r56 r68 r82 1r0 1r2 1r5 1r8 2r2 2r7 3r3 3r9 4r7 5r6 6r8 8r2 100 120 150 180 220 270 330 390 470 560 680 820 101 rdc max (ohms) 0.70 0.75 0.85 0.95 1.00 1.10 1.25 1.40 0.65 0.75 0.85 0.95 1.05 1.20 1.30 1.40 1.55 1.75 0.95 2.20 3.50 3.80 4.40 5.00 5.80 6.30 7.10 9.50 11.00 12.10 16.60 19.00 21.00 idc (ma) max 190 180 170 160 155 150 140 130 195 180 170 160 155 145 130 130 125 120 115 105 80 75 70 65 60 115 110 90 80 75 70 65 60 tolerance ( % ) 10 10 10 10 10 10 10 10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 inductance ( h ) 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 q min 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 20 20 20 20 20 15 lq test freq. (mhz) 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 s.r.f. (mhz) min. 230 210 190 175 160 150 135 125 115 100 90 85 80 75 65 60 55 50 45 40 32 30 28 25 22 21 20 18 17 16 15 13 12 electrical ~ style t (standard) electrical ~ style p (high current) inductance code 1r0 1r5 2r2 3r3 4r7 6r8 100 120 150 220 330 rdc max (ohms) 0.45 0.55 0.65 0.85 1.20 1.30 2.20 2.70 3.20 4.00 6.50 idc (ma) max 475 435 390 340 285 170 210 195 175 160 120 tolerance ( % ) 20 20 20 20 20 10 10 10 10 10 10 inductance ( h ) 1.0 1.5 2.2 3.3 4.7 6.8 10.0 12.0 15.0 22.0 33.0 q min 10 10 10 8 8 8.5 20 20 20 20 20 lq test freq. (mhz) 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 s.r.f. (mhz) min. 95 85 65 55 43 44 32 25 21 18 16 type 3611 series page 2 of 4
temperature temperature range (storage): temperature range (operating): resistance to soldering: -40c to +100c -20c to +100c 260c for 10 secs. specifications electrical ~ style l (low inductance) inductance code r010 r012 r015 r018 r022 r027 r033 r039 r047 r056 r068 r082 r10 r12 r15 r18 r22 r27 r33 r39 r47 r56 r68 r82 rdc max (ohms) 0.32 0.34 0.38 0.40 0.43 0.47 0.51 0.55 0.59 0.63 0.68 0.73 0.80 0.87 0.98 1.05 1.15 1.25 1.37 1.47 1.58 1.70 1.85 2.10 idc (ma) max 280 270 255 250 240 230 220 215 205 200 190 185 175 170 160 155 145 140 135 130 125 120 110 100 tolerance ( % ) 10 10 10 10 10 10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 5/10 inductance ( h ) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 q min 10 10 10 10 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 lq test freq. (mhz) 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 s.r.f. (mhz) min. 2500 2200 1800 1550 1350 1150 1000 890 770 670 590 520 460 400 340 300 260 230 200 180 160 145 130 100 type 3611 series page 3 of 4 dimensions marking (inductance) 2.0 2.5 1.6 0.4 1.5 inductor land solder heat 4.0 weight = 25mg 1.5 1.5
packaging (tape) 1.75 4.0 2.0 o1.5 0.3 1.85 2.4 2.9 4.0 8.0 3.5 to meet eia 48 iec 286 pt3 packaging (reel) 20.5 o130.5 o210.5 o178 101.5 12 o60 o38 soldering soldering dipping 230c 10sec max. cooling preheating 130 ~ 150c 5 - 10 seconds 2 - 3 minutes 0 50 100 150 200 250 300 soldering temperature (c) reflow soldering flow soldering 2 - 3 minutes 50 100 150 200 250 300 soldering temperature (c) 0 soldering dipping 260c 10 secs max. cooling preheating 100 ~ 150c how to order common part inductance tolerance l - low inductance p - high current t - standard value code (see table) k 1r5 3611 t 3611 - 1008 size j - 5% k - 10% m - 20% specifications type 3611 series page 4 of 4 style meggitt electronic components ltd. ohmic house, westmead industrial estate, swindon, wilts. sn5 7us telephone:(01793)487301(admin.) (01793)611666 (sales) email:sales@megelec.co.uk fax:(01793) 611777 this publication is issued to provide outline information only and (unless specifically agreed to the contrary by the company i n writing) is not to form part of any order or be regarded as a representation relating to the products or service concerned. we reserve the right to alter without notice the specification, design, price or conditions of supply of any product or service. whilst meggitt electronic components products are of the very highest quality and reliabi lity, all electronic components can occasionally be subject to failure. where failure of a meggitt electronic components product could result in life threatening consequences, then the circuit and application must be discussed with the company. such areas might include ecg, respiratory. and other medical and nuclear applications and any non fail safe applications circuit.
|
