dura-con ? nano get connected...
both plug and socket available in 9,15,21,25,31,37 and 51 positio ns dual row 180 pig t ail / solder cup 0.762 mm pitch (0.030) z axis compression mating (patent pending) mil-dtl-83513 rated mil-dtl-32139 style jackscrews 0.80 unf low mating force mechanical wipe contact action non magnetic shell insulator: poyeltherimide (pei) socket contact: brass socket contact plating: gold plated 1.25 microns (50 microins) min plug contact: brass, molybdenum plug contact plating: gold plated 1.25 microns (50 microins) min gold plated 0.5 microns (20 microins) min. shell: 303 stainless steel shell plating: passivated to fed spec qq-p-35c type ii (def stan 03-2 method m) sealing: epoxy compound operating t emperature: -55c to +125c shock: 50g s in accordance with mil dtl 83513 vibration: 20g s in accordance with mil dtl 83513 contact does not relax under the effects of time, temperature, thermal cycling and humidity salt spray: 48 hours in accordance with eia-364-26 condition b humidity: 96 hours in accordance with eia-364-31 condition b (except steps 7a and 7b) current rating: 3 amps max in isolation, 1.8 amps fully loaded @ 30 a wg wire withstanding voltage: 600v ac @ sea level low level signal level contact resistance: 36 milliohms typical mated pair insulation resistance: 500v and 5000 megohms (mil dtl 83513, eia-364-21) contact resistance: 34 millivolt when tested with 1 amp current, 30 a wg wire ( eia-364-27) mating force: min 0.56 n per contact for connector mating force (nominal performance) nano-miniature, dual row , 180 degree connector, with polarised shell providing optimum miniaturisation. fea t u r e s m a t e ri a ls e nvironm e nt a l e l e ctric a l m e ch a nic a l nano connectors
cinch nano connector insulator type u = pei mounting type m = screw mount metal shell no. of contacts 9, 15, 21, 25, 31, 37, 51 contct type p = plug (male) s = socket (receptacle) wire size in awg 0 = 30 awg s = solder cup (consult cinch) wire type c = solid copper 30 awg (uninsulated) shell plating s = stainless steel lead length in inches 0.5 solid copper wire only 1.0 solid copper wire only 2.0 solid copper wire only termination colour or wire fnish 3 = tin-plated 4 = gold-plated nc u m 25 p 0 c 4 0.5 s ordering information contact arrangements (mating view of pin insert) 6 9 12 14 17 20 27 9 15 21 25 31 37 51 1 1 1 1 1 1 1 5 8 11 13 16 19 26 9 cavity 15 cavity 21 cavity 25 cavity 31 cavity 37 cavity 51 cavity 9 15 21 25 31 37 51 6 9 12 14 17 20 27 5 8 11 13 16 19 26 1 1 1 1 1 1 1 9 cavity 15 cavity 21 cavity 25 cavity 31 cavity 37 cavity 51 cavity notes: engaging face of insert shown. cavity identifcation numbers are for reference only and do not appear on the part. plug connector socket connector
connector dimensions
hardware detail mm. (in.) mm. (in.) mm. (in.) 9 plug 10.23 .403 7.56 .298 4.76 .188 9 socket 10.23 .403 7.56 .298 4.84 .191 15 plug 12.51 .493 9.85 .388 7.05 .278 15 socket 12.51 .493 9.85 .388 7.13 .281 21 plug 14.80 .583 12.14 .478 9.34 .368 21 socket 14.80 .583 12.14 .478 9.42 .371 25 plug 16.32 .643 13.66 .538 10.86 .428 25 socket 16.32 .643 13.66 .538 10.94 .431 31 plug 18.61 .733 15.95 .628 13.15 .518 31 socket 18.61 .733 15.95 .628 13.23 .521 37 plug 20.89 .823 18.23 .718 15.43 .608 37 socket 20.89 .823 18.23 .718 15.51 .611 51 plug 26.23 1.033 23.57 .928 20.77 .818 51 socket 26.23 1.033 23.57 .928 20.85 .821 la yout b centres c basic a basic
connector performance specifcations property requirement t est method current rating 1.8 amp (fully loaded) 3 amp (contact pairs in isolation) dielectric withstanding v oltage 600v ac @ sea level mil-std-1344, method 3001 contact resistance t ypically 34 millivolts @ 1 amp eia-364-06 low level contact resistance t ypically <36 milliohms eia- 364-23 insulation resistance 5000 megohms mil dtl 83513, eia-364-21 magnetic permeability consult cinch mating force t ypically 0.5 newtons per contact contact retention consult cinch operating t emperature -55c to +125c mil-dtl-83513, mil-dtl-32139 durability >200 mated connector cycles eia-364-06 salt spray (corrosion) 48 hours eia-364-26 condition b shock 50 g s mil-dtl-83513, mil-std-1344a method 20004.1 condition e (eia-364-26 condition b) v ibration 20 g s mil-dtl-83513, mil-std-202g method 204 condition d (eia-364-28)
sea aerospace sub-t errain ground support armoured v ehicle rail space radar a vionics munitions / missile rectangular circular z axis compression power & signal hermetic ip rated filtered edge connector multipole high speed rugged enclosure stranded solid t wisted pairs co-axial colour code (single / multi) multi core shielded wire a wg custom cable dust moisture resistant full w ater immersion chemical compatibility rohs low smoke / zero halogen extreme t emperature tolerance flame retardant single ended double ended multi limb cable assembly strain relief backshell environmental backshell / boot 360 0 screened backshell moulded strain relief w oven flexible circuit operating t emperature range mating cycles v oltage rating current rating filtration rating materials / finish contact plating housing plating male female crimp solder pc t ail 90 0 180 0 rf signals number contact points contact pitch housing material plastic metal oil petroleum gas (opg) renewable energy military & defence commercial computer industrial t elecommunications medical engineers check list sector connector style wire type environment custom interconnect specification construction market segment cinch connectors ltd. shireoaks road worksop s80 3ha nottighamshire, u.k. phone: +44 (0)1909 474131 fax: +44 (0)1909 478321 e-mail: info@cinchuk.com www.cinch.com cinch connectors 1700 finley road lombard, il 60148 usa phone: (1) 630 705 6000 fax: (1) 630 705 6060 www.cinch.com
cinch connectors ltd. shireoaks road worksop s80 3ha nottighamshire, u.k. phone: +44 (0)1909 474131 fax: +44 (0)1909 478321 e-mail: info@cinchuk.com www.cinch.com cinch connectors 1700 finley road lombard, il 60148 usa phone: (1) 630 705 6000 fax: (1) 630 705 6060 www.cinch.com for over 70 years, cinch has been a reliable supplier of a variety of quality connector products to various industries. we are a multi-national manufacturer with manufacturing facilities in the u.s, u.k and mexico. cinch has applied its extensive expertise in interconnection technology to engineer and manufacture connectors of various complexities using state-of-the-art technology and tooling. mechanical design is accomplished using pro/e ? 3d solid modelling and autocad ? supported by nonlinear and linear finite element analysis, and mold flow software. our engineers utilize in-house capabilities in high frequency interconnect simulation, spice model generation and high frequency testing to develop the optimum product. all products are validated in cinchs first article, mechanical, electrical, and environmental test facilities ensuring the fnished products meet our customers most stringent specifcations. simply, your connectors are manufactured in state-of- the-art facilities as9100 approved that are committed to customer satisfaction and continuous improvement. proven excellence ? 2009 cinch connectors ltd dura-con nano uk 0609
|
