1 voltage controlled oscillator 9.2 - 10.2 ghz maoc-009871 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v2 features ?? low phase noise ?? wide tuning range ?? divide-by-two output ?? integrated buffer amplifier ?? excellent temperature stability ?? +5v bias ?? lead-free 5 mm 32-lead pqfn package ?? halogen-free ?green? mold compound ?? rohs* compliant and 260c reflow compatible description the maoc-009871 is an ingap hbt-based voltage controlled oscillator for frequency generation. no external matching components are required. this vco is easily integrated into a phase lock loop using the divide-by-two output. the extremely low phase noise makes this part ideal for many radio applications including high capacity digital radios. the primary applications of the maoc-009871 are point-to-point radio, point-to-multipoint radio, communications systems, and low phase noise applications. the 5 mm pqfn package has a lead-free finish that is rohs compliant and compatible with a 260oc reflow temperature. the package also features low lead inductance and an excellent thermal path. block diagram pin function pin function 1 n/c 17 n/c 2 n/c 18 n/c 3 n/c 19 rf 4 n/c 20 n/c 5 n/c 21 v cc 6 n/c 22 n/c 7 v buffer 23 n/c 8 n/c 24 n/c 9 n/c 25 n/c 10 n/c 26 n/c 11 n/c 27 n/c 12 rf/2 28 n/c 13 n/c 29 v tune 14 n/c 30 n/c 15 n/c 31 n/c 16 n/c 32 n/c pin designations 2 2. the exposed pad centered on the package bottom must be connected to rf and dc ground. connecting all n/c pins to rf/dc ground in the layout is also recommended. * restrictions on hazardous substances , european union directive 2002/95/ec. ordering information 1 part number package MAOC-009871-TR0500 500 piece reel maoc-009871-tr1000 1000 piece reel maoc-009871-001smb sample board 1. reference application note m513 for reel size information.
2 voltage controlled oscillator 9.2 - 10.2 ghz maoc-009871 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v2 electrical specifications: t a = +25c, v cc = v buffer = 5 v 3 , z 0 = 50 ? parameter test conditions units min. typ. max. output power rf port, 9.2 - 10.2 ghz rf/2 port, 4.6 - 5.1 ghz dbm 5 3 7 6 ? ssb phase noise rf port, 10 khz offset, 9.2 - 10.2 ghz rf port, 100 khz offset, 9.2 - 10.2 ghz dbc/hz ? -86 -113 ? harmonics/subharmonics v cc =v buffer =v tune =5v rf port, 1 / 2 f o rf port, 3 / 2 f o rf port, 2f o rf/2 port, 2f o rf/2 port, 3f o dbc ? -20.0 -41.5 -34.0 -9.0 -33.0 ? pulling (sensitivity to match) v cc =v buffer =v tune =5v rf port, vswr = 1.95:1 to 2.25:1 mhz pk-pk ? 8.2 ? pushing (sensitivity to supply voltage) rf port, v tune = 5 v rf/2 port, v tune = 5 v mhz/v ? 20 4 ? frequency drift rate (sensitivity to temperature) rf port, 9.2 - 10.2 ghz rf/2 port, 4.6 - 5.1 ghz mhz/oc ? 1.0 0.5 ? output return loss rf port, 9.2 - 10.2 ghz rf/2 port, 4.6 - 5.1 ghz db ? 3 7 ? tuning sensitivity @ rf port v tune =5 v ghz/v ? 0.18 ? supply current i total (i cc + i buffer ) i cc i buffer ma ? ? ? 185 165 20 205 175 30 tune voltage v tune v 2 ? 13 tuning current leakage v tune =13 v a ? 5 10 3. vco can operate over the 4.75 v to 5.25 v supply voltage range.
3 voltage controlled oscillator 9.2 - 10.2 ghz maoc-009871 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v2 esd rating: class 1b handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these class 1b devices. absolute maximum ratings 4,5 4. exceeding any one or combination of these limits may cause permanent damage to this device. 5. m/a-com technology does not recommend sustained operation near these su rvivability limits. 6. operating at nominal conditions with t j +135c will ensure mtbf > 2.5 x 10 6 hours. 7. junction temperature (t j ) = t c + ? jc * (v * i) typical thermal resistance ( ? jc) = 35 c/w. a) for t c = 25c, t j = 57c @ 5 v, 185 ma b) for t c = 85c, t j = 118c @ 5 v, 190 ma parameter absolute maximum supply voltage (v cc & v buffer ) +5.5 vdc storage temperature -55oc to +150oc operating temperature 6 -40oc to +85oc v tune 0 to +15 vdc junction temperature 7 +135oc case temperature (t c ) (measured @ exposed pad) +100oc
4 voltage controlled oscillator 9.2 - 10.2 ghz maoc-009871 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v2 typical performance curves: v cc = v buffer = 5v, t a = +25 ? c (unless otherwise indicated) output frequency vs. tuning voltage - rf port output frequency vs. tuning voltage - rf/2 port output frequency vs. tuning / supply voltage - rf port output frequency vs. tuning / supply voltage - rf/2 port output power vs. tuning voltage - rf port output power vs. tuning voltage - rf/2 port 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 01234567891011121314 +25c -40c +85c tuning voltage (v) 3.8 4.0 4.2 4.4 4.6 4.8 5.0 5.2 5.4 5.6 5.8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +25c -40c +85c tuning voltage (v) 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 4.75 v 5.00 v 5.25 v tuning voltage (v) 3.8 4.0 4.2 4.4 4.6 4.8 5.0 5.2 5.4 5.6 5.8 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 4.75 v 5.00 v 5.25 v tuning voltage (v) 2 4 6 8 10 12 14 16 18 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +25c -40c +85c tuning voltage (v) 0 2 4 6 8 10 12 14 01234567891011121314 +25c -40c +85c tuning voltage (v)
5 voltage controlled oscillator 9.2 - 10.2 ghz maoc-009871 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v2 frequency sensitivity vs. tuning voltage - rf port fr equency sensitivity vs. tuning voltage - rf/2 port single side band phase no ise vs. tuning voltage rf port single side band phase noise vs. frequency offset rf port (v tune = 5v) typical performance curves: v cc = v buffer = 5v, t a = +25 ? c (unless otherwise indicated) 0.0 0.2 0.4 0.6 0.8 1.0 01234567891011121314 +25c -40c +85c tuning voltage (v) 0.0 0.2 0.4 0.6 0.8 1.0 01234567891011121314 +25c -40c +85c tuning voltage (v) -160 -140 -120 -100 -80 -60 -40 -20 0 10 2 10 3 10 4 10 5 10 6 10 7 +25c -40c +85c frequency offset (hz) -130 -120 -110 -100 -90 -80 -70 -60 -50 01234567891011121314 10 khz offset 100 khz offset tuning voltage (v)
6 voltage controlled oscillator 9.2 - 10.2 ghz maoc-009871 ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v2 sample board component value case size c1 100 pf 0402 c2, c3, c4 0.1 f 0402 c5 10 f tantalum 1206 parts list ? reference application note s2083 for lead-free solder reflow recommendations. meets jedec moisture sensitivity level 1 requirements. plating is 100% matte tin over copper. lead-free 5 mm 32-lead pqfn ?
|
