data sheet : aspp205 , ASPP205-100 description: pillow block pressed steel housing. setscrew type. bolt size bearing number housing number hl janh 1 h 2 bs kg. lb. radial axial radial axial mm 25 28.6 108 86 32 11.5 4 66.3 29.8 8 m10 as205 pp205 0.3 0.7 inch 1 1.1/8 4.1/4 3.3/8 1.1/4 29/64 0.157 2.7/32 1.063 0.295 3/8 as205-100 pp205 0.3 0.7 mounting of the housing: 1. the surface on which the housing is mounted must be sufficiently rigid. 3. it is desirable that the angle between the surface on which the hosing is mounted and the shaft be maintained to a tolerance of +/- 2 o . maintenance free type. the ntn maintenance free bearing unit contains a high grade lithium based grease, suitable for use over a long period, which is ideal for sealed bearings. further information is contained in catalogue 2400-vi/e if in doubt as to the suitaility of any prodyct for the intended applic ation advice should by sought. n lbf shaft dia nominal dimensions mass of unit max. load. (1) recommended although an advantage of the ntn bearing unit is that it can be fitted easily and will function efficiently on any part of the machine, attention must be paid to the following points in order to ensure its normal service life. 2. the surface on which the housing is mounted should be as flat as possible. (the housing should sit firmly in position). defo rmation of the housing caused by incorrect mounting will in turn cause deformation of the bearing leading to its premature breakdown. 3500 1400 770 208
|
