terminal blocks dat@term tyco electronics dat@term terminal blocks set a new standard for outside plant telephony connectivity. dat@term terminal blocks are terminations designed for high speed data. based on the gel and idc technologies that have made tyco electronics sealed connections the industry standard, the dat@term terminal blocks add a new level of simplicity and efficiency. toolless toggles terminate and lock 22-26 awg conductors and seals the connection against corrosion. dat@term terminal blocks are suitable for a wide variety of applications. contact your tyco electronics sales representative for more information. features: ? replaceable toggle is solidly locked into place when closed ? significant visual contrast between open/closed toggle ? toggle action results in no wire insulation left behind ? pair-at-a-time connections ? compact size ? accessories are available for: - testing - no-disconnect transferring - bridging - 50-pair testing - special circuit marking telecom outside plant
8000 purfoy road fuquay varina, nc 27526-9349 tel 919-557 8900 fax 919-557 8498 www.tycoelectronics.com www.telecomosp.com ? 2005 tyco electronics corporation 16547941 c347.09/06 dat@term and amp stack are trademarks of tyco electronics corporation. the information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. however, tyco electronics makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. tyco electronics obligations shall only be as set forth in tyco electronics standard terms and conditions of sale for this product and in no case will tyco electronics be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. users of tyco electronics products should make their own evaluation to determine the suitability of each such product for the specific application. dtm C xxx - xxx C x C x x C xx C rva type xcb - cross connect block bmt - bracket mounted terminal pair count 025 - 25 pair (bmt only) 050 - 50 pair (bmt only) 100 - 100 pair (xcb only) block numbering 1 - 1-25 (bmt only) 2 - 1-50 and 51-100 (xcb only) 3 - 1-50 (bmt only) cable type a - 100 pr pic air core no jacket no mylar d - 25 pr fs cable (bmt only) e - 50 pr fs cable (bmt only) stub length 05 - 5 ft (xcb only) 07 - 7 ft (xcb only) 10 - 10 ft (xcb only) 12 - 12 ft (bmt only) termination r - no splice module (raw harness) 1 - amp stack dry straight (4000d) 2 - amp stack filled straight transparent (4000c) 3 - amp stack filled bridge (4005 cbm) 4 - amp stack dry bridge (4005 dpm) 5 - 3m 710 sc1 filled straight 6 - 3m 710 filled bridge description key is to assist with interpreting product configuration. not all configurations are available. contact customer service regarding availability.
|
