technical data sheet 1 / 5 str. male module 4 solder type inserts r694.251.026 3 mm for pcb series : mcc2 issue : 0624 c in the effort to improve our products, we reserve t he right to make changes judged to be necessary. all dimensions are in mm. . . pn ao components body center contact outer contact insulator gasket others parts - - materials bronze brass bronze ptfe - liquid cristal polymer - - plating ( m m ) npgr npgr npgr - - -
technical data sheet 2 / 5 str. male module 4 solder type inserts r694.251.026 3 mm for pcb series : mcc2 issue : 0624 c in the effort to improve our products, we reserve t he right to make changes judged to be necessary. packaging specification standard unit other 50 w option contact us electrical characteristics environmental impedance 50 w operating temperature -25/+125 c frequency 0-6 ghz hermetic seal na atm.cm3/s vswr 1.12 + 0,0000 x f(ghz) maxi panel leakage na insertion loss 0.2 ? f(ghz) db maxi rf leakage - ( - - f(ghz)) db maxi voltage rating 500 veff maxi dielectric withstanding voltage 750 veff mini insulation resistance 5000 m w mini other characteristics assembly instruction others : vswr=1.12 optimized between dc to 3ghz mechanical characteristics center contact retention axial force C mating end 6 n mini axial force C opposite end 6 n mini torque na n.cm mini recommended torque mating na n.cm panel nut na n.cm mating life 500 cycles mini weight 97,8400 g
technical data sheet 3 / 5 str. male module 4 solder type inserts r694.251.026 3 mm for pcb series : mcc2 issue : 0624 c in the effort to improve our products, we reserve t he right to make changes judged to be necessary.
technical data sheet 4 / 5 str. male module 4 solder type inserts r694.251.026 3 mm for pcb series : mcc2 issue : 0624 c in the effort to improve our products, we reserve t he right to make changes judged to be necessary. place the coax connector(s) on the pcb place correctly the pcb between the punch and the n est of the press. in case of multiple housing configuration , use a p unch and a nest large enough to cover all the housi ngs. ensure solder legs are properly aligned with the ho les before press-mounting. press on the housing(s) with the punch until the co mplete insertion of the fixing stud into the pcb. press 100n punch nest solder tool pcb connector punch punch or nest nest solder tool for several connectors solder tool for one
technical data sheet 5 / 5 str. male module 4 solder type inserts r694.251.026 3 mm for pcb series : mcc2 issue : 0624 c in the effort to improve our products, we reserve t he right to make changes judged to be necessary. after the insertion of the connectors on the printe d circuit , leave the solder tool inserted in posit ion. solder the legs on board after the solder legs have been soldered , using an appropriate soldering process , remove the solder tool. radiall do not recommend to use more than 3 modules on the same motherboard and cant be held liable of any connection defect when more than 3 modules a re implemented on the board. solder legs solder tool pcb solder tool pcb
|
