spec no: dsac0364 rev no: v.3 date: mar/20/2005 page: 1 o f 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp :1203002425 3.2x1.6mm smd chip led lamp features 3.2mmx1.6mm smt led,1.05mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. vavrious colors and lens types available . package : 2000pcs / reel. rohs compliant. package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subject to change without notice. description the hyper red source color devices are m ade with dh ingaalp on gaas substrate light emitting diode. APTR3216SURCK hyper red
spec no: dsac0364 rev no: v.3 date: mar/20/2005 page: 2 o f 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp :1203002425 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 APTR3216SURCK hyper red (ingaalp) water clear 50 150 120 symbol parameter device typ. max. test conditions units peak peak wavelength hyper red 650 nm i f =20ma d dominant wavelength hyper red 635 nm i f =20ma ? 1/2 spectral line half - width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r = 5v parameter hyper red units power dissipation 170 mw dc forward current 30 ma peak forward current [1] 185 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsac0364 rev no: v.3 date: mar/20/2005 page: 3 o f 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp :1203002425 hyper red APTR3216SURCK
spec no: dsac0364 rev no: v.3 date: mar/20/2005 page: 4 o f 4 approved: j. lu checked: allen liu drawn: w.j.zhu erp :1203002425 recommended soldering pattern (units : mm) tape specifications (units : mm) APTR3216SURCK remarks: if special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
