View NX60TA-9SAA9-SP_6802526.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

b8 i/o card interface connectors nx series 1. low profile protorusion above the pcb board is only 2.9mm, and the connectors can be mounted to type i and ii i/o cards. 2. emi/rfi protection full metal shielding. shield connects first, ahead of contacts. 3. esd secure thermoplastic molded covers assures insulation of the connections and shields from esd. 4. secure latching a built-in latch assures correct and secure mating of connector. 5. reliable conductor termination reliable termination of conductors is accomplished by proven idc termination. 6. sequential mating the 0.8mm pitch contacts are engaging the corresponding parts in sequence: ground- power & signal 7. rugged construction securely attached to the board with optional screws. 8. card frame kits available as a separate part number. features specifications 100 v dc 300 v ac / 1 minute 100 ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 60? and humidity of 90% to 95% -55 ? , 30 min. / 15 to 30 ? , within 5 min / 85 ? , 30 min / 15 to 35 ? , within 5 min, for 5 cycles 3000 cycles reflow: at the recommended temperature profile manual soldering: 300? for 3 seconds 250 m ? min. no flashover or insulation breakdown. 40 m ? max. no electrical discontinuity of 10s or more insulation resistance: 100 m ? min. no damage, cracks, or parts looseness. 60 m ? max. no deformation of components affecting performance. 1. insulation resistance 2. withstanding voltage 3. contact resistance 4. vibration 5. humidity (steady state) 6. temperature cycle 7. durability (insertion/withdrawal) 8. resistance to soldering heat ratings 0.5 a 125 v ac current rating voltage rating operating temperature -30 ? to +70 ? (note 1) operating humidity 95% r.h. or less (no condensation) storage temperature range -10 ? to +60 ? (note 2) storage humidity range 40 to 70% (note 2) item specification conditions note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. used with i/o cards, portable personal computers,and the external connections of various small-sized portable terminals. applications the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b9 i/o cable materials b applicable cable item material finish remarks receptacle plug unit plug cover frame kit insulator contacts body insulator contacts cover body frame spring pin coil spring panel thermoplastic compound copper alloy stain less thermoplastic compound copper alloy thermoplastic compound stainless steel thermoplastic compound phosphor bronze stainless steel stainless steel stainless steel black selective gold plating solder plating black selective gold plating black - black gold plating - - ul94v-0 ---- ---- ---- ul94v-0 ---- ul94v-0 ---- ---- ---- ---- ---- awg # 28(7/0.127) 0.58mm 0.62mm ul20276 and ul2789 ul2990 conductor size cable style jacket outer diameter frame ground terminal with thermal adhesive tape ordering information nx 60 t a - 15 s aa 9 - sp 1 2 3 11 8 6 5 7 9 receptacle nx 30 t a - 15 p aa 1 2 3 4 6 5 7 plug nx - 15 t a - cv 1 1 5 3 11 10 plug covers nx - 15 t - kt 9 (05) 5 3 8 12 10 frame kits 1 nx t - p (05) 3 10 12 1 nx - 32 t - p (05) 5 3 10 12 panel (for 9, 15, or 25 contacts) (for 32 contacts) sp : compliant mounting bracket (for cards use) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b10 b dimensions of connector cross section b recommended board dimensions (board thickness: 0.5 mm maximum) 0.9 mm offset type 0.3 mm offset type nx- 0 9t-kt9 nx-15t-kt9 nx-25t-kt9 nx-32t-kt9 nx- 0 9t-kt3 nx-15t-kt3 nx-25t-kt3 nx-32t-kt3 0 9 15 25 32 0 9 15 25 32 234-0010-8 234-0011-0 234-0012-3 234-0026-8 234-0034-6 234-0035-9 234-0036-1 234-0054-3 26.4 31.2 39.2 44.8 26.4 31.2 39.2 44.8 25.0 29.8 37.8 43.4 25.0 29.8 37.8 43.4 22.4 27.2 35.2 40.8 22.4 27.2 35.2 40.8 0 6.4 11.2 19.2 24.8 0 6.4 11.2 19.2 24.8 0.9 0.9 0.9 0.9 0.3 0.3 0.3 0.3 part number number of contacts cl no. a b c d offset unit: mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b11 receptacle 0.9 mm offset type 0.3 mm offset type nx60ta- ? saa9-sp nx60ta- ? saa3-sp nx60ta- 0 9saa9-sp nx60tb-15saa9-sp nx60ta-25saa9-sp nx60t 0 -32saa9-sp 0 9 15 25 32 234-0106-5 234-0097-6 234-0107-8 234-0023-0 25.2 30.0 38.0 43.6 19.7 24.5 32.5 38.1 17.2 22.0 30.0 35.6 0 6.4 11.2 19.2 24.8 part number number of contacts cl no. a b c d unit: mm nx60ta- 0 9saa3-sp nx60tb-15saa3-sp nx60ta-25saa3-sp nx60ta-32saa3-sp 0 9 15 25 32 234-0031-8 234-0098-9 234-0033-3 234-0053-0 25.2 30.0 38.0 43.6 19.7 24.5 32.5 38.1 17.2 22.0 30.0 35.6 0 6.4 11.2 19.2 24.8 part number number of contacts cl no. a b c d unit: mm 0.3 d p=0.8 2 ? 2 8 1.9 c b a 2.9 ?1 0.9 contact no.1 contact no.1 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b12 nx30ta- 0 9paa nx30ta-15paa nx30ta-25paa nx30ta-32paa 0 9 15 25 32 234-0002-0 234-0005-8 234-0008-6 234-0024-2 14.6 19.4 27.4 33.0 14.1 18.9 26.9 32.5 part number number of contacts cl no. a b unit: mm plug covers plug units nx30ta-15paa cl234-0005-8 nx-15t-cv cl234-0006-0 nx- 0 9t-cv nx-15t-cv nx-15t-cv1 nx-25t-cv nx-25ta-cv1 nx-32ta-cv1 0 9 15 15 25 25 32 234-0003-2 234-0006-0 234-0017-7 234-0009-9 234-0039-0 234-0025-5 18.2 23.0 23.0 31.0 31.0 36.6 21.2 26.0 26.0 34.0 34.0 40.6 14.0 18.8 18.8 26.8 26.8 32.4 26 28 28 30 32 32 0 6.0 0 7.0 0 5.0 0 8.0 13.0 16.2 5.5 6.0 4.0 6.5 4.0 4.2 6.5 7.0 5.0 7.5 5.0 5.0 less than ? 5.5 less than ? 6.0 less than ? 4.0 less than ? 6.5 less than ? 6.5(note) less than ? 7.5(note) part number number of contacts cl no. a b c d e f g outer diameter of cable unit: mm note: designed for flat cable use. when round cable is used, clamp portion shall be made flat, adjusting exclusive use bushing. contact no.1 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b13 frame kit (frame + 2 x cover panels) frame only nx- 0 9t-kt9 nx-15t-kt9 nx-25t-kt9 nx-32t-kt9 nx- 0 9t-kt3 nx-15t-kt3 nx-25t-kt3 nx-32t-kt3 0 9 15 25 32 0 9 15 25 32 234-0010-8 234-0011-0 234-0012-3 234-0026-8 234-0034-6 234-0035-9 234-0036-1 234-0054-3 part number number of contacts cl no. connectors for the card side(note 1) ic1f-68rd-1.27sfa ic1f-68rd-1.27sf a 640-0040-3 640-0035-3 0.9mm 0.3mm part number cl no. offset nx60ta- 0 9saa9-sp nx60tb-15saa9-sp nx60ta-25saa9-sp nx60t a -32saa9-sp nx60ta- 0 9saa3-sp nx60tb-15saa3-sp nx60ta-25saa3-sp nx60ta-32saa3-sp back connector nx- 0 9t-f9 nx-15t-f9 nx-25t-f9 nx-32t-f9 nx- 0 9t-f3 nx-15t-f3 nx-25t-f3 nx-32t-f3 0 9 15 25 32 0 9 15 25 32 234-0018-0 234-0019-2 234-0020-1 234-0063-4 234-0060-6 234-0061-9 234-0062-1 234-0067-5 part number number of contacts cl no. connectors for the card side ic1f-68rd-1.27sfa ic1f-68rd-1.27sf a 0.9mm 0.3mm offset nx60ta- 0 9saa9-sp nx60tb-15saa9-sp nx60ta-25saa9-sp nx60t a -32saa9-sp nx60ta- 0 9saa3-sp nx60tb-15saa3-sp nx60ta-25saa3-sp nx60ta-32saa3-sp nxt-p nx-32t-p nxt-p nx-32t-p nx-csa nx-csa & nx-csb back connector panel coil spring nx-15t-kt9 cl234-0011-0 nx-15t-f9 cl234-0019-2 unit: mm unit: mm frame cover the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b14 unit: mm nxt-p cl234-0058-4 nxt-pa cl234-2011-1 nxt-p nxt-p(05) nx-32t-p nx-32t-p(05) 234-0058-4 234-0058-4-05 234-0059-7 234-0059-7-05 9, 15, 25 32 silver matt finish dull processing material silver matt finish dull processing material part number cl no. number of frame contacts panel finish nxt-pa nxt-pa(05) nx-32t-pa nx-32t-pa(05) 234-2011-1 234-2011-1-05 234-0068-8 234-0068-8-05 9, 15, 25 32 silver matt finish dull processing material silver matt finish dull processing material part number cl no. number of frame contacts panel finish ? panels are avilable in two types: a 32-contact special type and a common type with 9, 15, or 25 contacts. ? ordering volume for panels is one panel per unit volume.one frame corresponds to 2 panels. panel (for type 2 2 pcmcia cards) panel (for type 1 1 pcmcia cards) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b15 ground contact spring bushing modular plugs for round cable (awg #28) connector 8-contact adapter part number nx-csa nx-csb 234-0042-4 234-0043-7 0.3mm: one packs cl no. offset: ordering volume sold in package of 1000 pcs. for 1,000 frames of 0.9 offset, please order two packs of nx-csa. for 1,000 frames of 0.3 offset, please order one pack of nx-csa and one pack of nx-csb. part number nx-25t-bs nx-32t-bs 234-0074-0 234-0055-6 25 32 cl no. number of contacts nx-csa cl234-0042-4 lead number reference table tm5rl-88-jj cl222-3798-7 nx-32t-bs cl234-0055-6 6 contacts 8 contacts connector (a) contact number tm5rl-88 connector (b) contact number tm5rl-88 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 0.3mm: one pack 0.9mm: two packs no. of contacts 6 8 222-2684-2 222-2685-5 tm30p-66p tm30p-88p cl no. part number modular plug manual wiring tool cl no. 250-0145-6 250-0146-9 tc1-tm30p-66p tc1-tm30p-88p part number applications for connections of i/o card connectors the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b16 b plug termination tool cable wiring cradle nx/3230-cat cl902-0250-4 1. set the wires in the wiring fixtures. 4. set holding plates (a) and (b) onto the guide plate. 5. insert the guide plate into the pressure welding and cutting fixtures. 6. pull down the handle. the wiring and cutting of excess cable length are completed. 2. align holding plates (a) and (b). 3. arrange the wires one at a time through holding plates (a) and (b). cutting and idc termination fixture main unit nx/3230-hp cl902-0252-0 cutting and idc termination attachment fixtures nx30ta-9gp cl902-0253-2 nx30ta-15gp cl902-0254-5 nx30ta-25gp cl902-0255-8 nx30ta-32gp cl902-0257-3 wiring procedure fixtures ? ? ? ? ? ? the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b17 b frame kit fixture b wiring fixture and accessories list plug frame kit a frame kit thermal fixture and a cooling fixture are also available. ground spring press fitting fixture special blocks i/o cable discrete cable nx30ta- 0 9paa nx30ta-15paa nx30ta-25paa nx30ta-32paa nx30ta- 0 9gp nx30ta-15gp nx30ta-25gp nx30ta-32gp nx- 0 9t-cv 0 nx-15t-cv 0 nx-15t-cv1 nx-25t-cv nx-32t-cv1 nx-30ta-9hc cl902-0260-8 nx-30ta-15hc cl902-0261-0 nx-30ta-15hc1 cl902-0262-3 nx-30ta-25hc1 cl902-0263-6 screw fixing cable connector process wiring nx/3230-cat (all contacts common) press pressurs welding and cutting nx/3230-hp guide plate shield case caulking cover case hand tool hood fitting manual work nx-9t-kt(9?) nx-15t-kt(9?) nx-25t-kt(9?) nx-32t-kt(9?) frame kit nx-spt cl902-0274-2 process spring pin press fitting press nx-spt-9 cl902-0275-5 nx-spt-15 cl902-0276-8 nx-spt-25 cl902-0277-0 nx-spt-32 cl902-0278-3 unit nx-pht cl902-0282-0 panel thermal caulking nx-pct cl902-0283-3 panel cooling nx-9t-cv nx-15t-cv nx-25t-cv nx-15t-cv1 ? 5.1 0.2 ? 5.7 0.2 ? 6.5 0.2 ? 3.8 0.2 fold the shield and bind 1.5 times with copper tape. do, do, crimp with cable sheath directly. cover case cable diameter strand termination note 1: the caulking height of hand tool is defined by follwing cable specifications. note 2: caulking specification change is needed when special cable is used. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b18 materials item material finish remarks receptacle plug unit insulator synthetic resin color : black ul94v-0 contacts copper alloy selective gold plating ---------- body stainless steel solder plating ---------- insulator synthetic resin color : black ul94v-0 contacts copper alloy selective gold plating ---------- plug cover cover synthetic resin color : black ul94v-0 body stainless steel -- -------- ---------- frame kit frame synthetic resin color : black ul94v-0 fg terminal phosphor bronze gold plating ---------- spring pin stainless steel -- -------- ---------- coil spring stainless steel -- -------- ---------- panel stainless steel with thermal adhesive tape ---------- ---------- ---------- 100 v dc 100 ma contact resistance : 60 m ? max. 0.5a 125 v ac 250 m ? min. 300 v ac 40 m ? min. 3000 cycles 1. current rating 2. voltage rating 3. insulation resistance 4. withstanding voltage 5. contact resistance 6. durability (insertion/withdrawal) item specification conditions specifications i/o cable conductor size insulator outer diameter cable style awg #30 (7/0.1) 0.5mm ul20276 features 1. low profile receptacle connectors have a mounting height of 3.5 mm and can be mounted to type ii i/o cards. 2. shielded construction a metal shell is used for shielding. 3. esd protection the use of an over-mold cover offers excellent esd protection. 4. more efficient wiring work wiring on the plug side uses awg #30 pressure welding (discrete type) for more efficient wiring work. applications i/o card interfaces. nx series 68 ordering information nx 60 h - 68 s 9 - sp 1 2 3 5 6 4 7 series name:nx wiring style 30: loose lead pressure welding type (for fine wire) 60: smt type serial type for form number of contacts: 68 type of opening s: receptacle p: plug coplanarity: 0.9 (dimension from connector center to board mounting position) variations sp: spring pin (for cards) type of accessories cv: vertical opening cover kt: frame kit panel finish (05): dull processing 1 2 3 4 5 7 6 8 9 receptacle nx 30 h - 68 p 1 2 3 5 4 plug unit nx - 68 h - cv 1 1 4 3 8 plug cover nx - 68 h - kt 9 (05) 4 3 6 9 8 frame kit back connectors for type ii i/o cards b applicable no flashover or insulation breakdown. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b19 receptacle note 1: the signal pin smt dimension of this product is 0 -0.05 . note 2: caulking specification change is needed when special cable is used. cl no. 234-0078-1 part number nx60h-68s9-sp +0.1 plug unit cl no. 234-0079-4 part number nx30h-68p the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b20 plug cover cl no. 234-0080-3 part number nx-68h-cv frame kit main unit panel cl no. 234-0081-6-05 part number nx-68h-kt9(05) note 1: suitable connectors for portion a are ic1f-68rd-1.27sfa. suitable connectors for portion b are nx60h-68s9-sp. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b21 note 1: applicable connectors for portion a are ic1f-68rd-1.27sfa. applicable connectors for portion b are nx60h-68s9-sp. b rcb mounting pattern (applicable board thickness: 0.5 mm max) b connector mounting dimensions (back conector side) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b22 b temperature profile applicable conditions reflow system : ir reflow solder : paste type 63 sn/37 pb (flux content 9 wt%) test board glass epoxy 47mm x 77.3mm x 0.5 mm metal mask thickness: 0.15 mm recommended temperature profile. the temperature may be slightly changed according to the solder paste type and amount. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of NX60TA-9SAA9-SP

	To Download NX60TA-9SAA9-SP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .