renco electronics, inc. 595 international place, rockledge, fl 32955-4200 usa (321) 637-1000 ?toll free engineering hot line 800-645-5828 since 1955 fax: (321) 637-1600 web site:www.rencousa.com e-mail:sales@rencousa.com rl-1325 rl-1326 mil-t-27d power line chokes the rl-1326/rl-1326 series of power line chokes are manufactured to meet mil-t- 27d specifications.* 99 values offer you a wide range of standard inductances from 3.9 h to 100,000 h and saturation currents from 14.7 amps to 0.077 amp. the use of high saturation flux density material make these coils ideal for use in switching regulat- ed power supply type applications. the small size of this choke series make them ideal for use in compact equipment. typical applications: ?switching regulators ?power amplifiers ?power supplies ?scr and triac controls ?rfi suppression ?filters ?reactors ?power inductors ?audio inductors * rl-1325 and rl-1326 are designed to meet mil-std-27d, rev. e class s, however, they are not currently listed on the desc qualified products list. dimensions: rl-1325 rl-1326 a .500 .015 .250 .015 b 1.0 .030 .675 .060 max. wt. max. wt. 12 grams 5 grams b a all dimensions in inches
renco electronics, inc. 595 international place, rockledge, fl 32955-4200 usa (321) 637-1000 ?toll free engineering hot line 800-645-5828 since 1955 fax: (321) 637-1600 web site:www.rencousa.com e-mail:sales@rencousa.com rl- 1325 renco part no. inductancee max. dcr saturation rated at 0 dc (h) (ohms) current current (dc amps) (amps) rl-1325-3.9 3.9 .008 15.5 4.0 rl-1325-4.7 4.7 .009 13.9 4.0 rl-1325-5.6 5.6 .010 12.6 4.0 rl-1325-6.8 6.8 .012 11.6 4.0 rl-1325-8.2 8.2 .014 9.89 4.0 RL-1325-10 10.0 .014 8.70 4.0 rl-1325-12 12.0 .021 8.21 4.0 rl-1325-15 15.0 .024 7.34 4.0 rl-1325-18 18.0 .025 6.64 4.0 rl-1325-22 22.0 .029 6.07 4.0 rl-1325-27 27.0 .030 5.36 4.0 rl-1325-33 33.0 .035 4.82 4.0 rl-1325-39 39.0 .036 4.36 4.0 rl-1325-47 47.0 .039 3.98 4.0 rl-1325-56 56.0 .041 3.66 3.2 rl-1325-68 68.0 .048 3.31 2.5 rl-1325-82 82.0 .066 3.10 2.0 RL-1325-100 100.0 .070 2.79 1.6 rl-1325-120 120.0 .099 2.54 1.6 rl-1325-150 150.0 .118 2.22 1.6 rl-1325-180 180.0 .135 1.98 1.6 rl-1325-220 220.0 .152 1.89 1.6 rl-1325-270 270.0 .178 1.63 1.6 rl-1325-330 330.0 .201 1.51 1.6 rl-1325-390 390.0 .233 1.39 1.6 rl-1325-470 470.0 .309 1.24 1.2 rl-1325-560 560.0 .396 1.17 1.0 rl-1325-680 680.0 .444 1.05 1.0 rl-1325-820 820.0 .603 0.97 0.8 RL-1325-1000 1000.0 .684 0.87 0.8 rl-1325-1200 1200.0 .972 0.79 0.6 rl-1325-1500 1500.0 1.14 0.70 0.6 rl-1325-1800 1800.0 1.30 0.64 0.6 rl-1325-2200 2200.0 1.73 0.58 0.5 rl-1325-2700 2700.0 2.27 0.53 0.4 rl-1325-3300 3300.0 2.78 0.47 0.4 rl-1325-3900 3900.0 3.03 0.43 0.4 rl-1325-4700 4700.0 3.51 0.39 0.4 rl-1325-5600 5600.0 4.31 0.359 0.315 rl-1325-6800 6800.0 6.26 0.322 0.250 rl-1325-8200 8200.0 6.95 0.293 0.250 RL-1325-10000 10000.0 8.03 0.266 0.250 rl-1325-12000 12000.0 10.1 0.241 0.200 rl-1325-15000 15000.0 11.6 0.214 0.200 rl-1325-18000 18000.0 16.3 0.198 0.158 rl-1325-22000 22000.0 24.0 0.180 0.125 rl-1325-27000 27000.0 25.0 0.162 0.125 rl-1325-33000 33000.0 28.3 0.146 0.125 rl-1325-39000 39000.0 35.0 0.136 0.100 rl-1325-47000 47000.0 39.7 0.122 0.100 rl-1325-56000 56000.0 45.0 0.112 0.100 rl-1325-68000 68000.0 63.0 0.101 0.082 rl-1325-82000 82000.0 87.2 0.090 0.065 RL-1325-100000 100000.0 98.7 0.081 0.065 rl- 1326 renco part no. inductancee max. dcr saturation rated at 0 dc (h) (ohms) current current (dc amps) (amps) rl-1326-3.9 3.9 .019 7.3 1.28 rl-1326-4.7 4.7 .022 6.3 1.28 rl-1326-5.6 5.6 .024 5.6 1.28 rl-1326-6.8 6.8 .026 5.3 1.28 rl-1326-8.2 8.2 .028 4.5 1.28 rl-1326-10 10.0 .033 4.1 1.28 rl-1326-12 12.0 .037 3.6 1.28 rl-1326-15 15.0 .040 3.3 1.28 rl-1326-18 18.0 .044 3.0 1.28 rl-1326-22 22.0 .052 2.7 1.28 rl-1326-27 27.0 .059 2.5 1.280 rl-1326-33 33.0 .073 2.2 1.008 rl-1326-39 39.0 .103 2.0 .804 rl-1326-47 47.0 .120 1.8 .804 rl-1326-56 56.0 .154 1.7 .804 rl-1326-68 68.0 .144 1.5 .804 rl-1326-82 82.0 .167 1.4 .804 rl-1326-100 100.0 .229 1.2 .632 rl-1326-120 120.0 .311 1.1 .508 rl-1326-150 150.0 .374 1.0 .508 rl-1326-180 180.0 .398 0.95 .508 rl-1326-220 220.0 .473 0.86 .508 rl-1326-270 270.0 .613 0.77 .400 rl-1326-330 330.0 .732 0.70 .400 rl-1326-390 390.0 .849 0.64 .400 rl-1326-470 470.0 1.27 0.59 .315 rl-1326-560 560.0 1.40 0.54 .315 rl-1326-680 680.0 1.77 0.49 .250 rl-1326-820 820.0 2.16 0.44 .200 rl-1326-1000 1000.0 2.53 0.40 .200 rl-1326-1200 1200.0 2.92 0.35 .200 rl-1326-1500 1500.0 3.80 0.33 .158 rl-1326-1800 1800.0 4.43 0.29 .158 rl-1326-2200 2200.0 4.93 0.27 .158 rl-1326-2700 2700.0 5.94 0.24 .125 rl-1326-3300 3300.0 7.72 0.220 .125 rl-1326-3900 3900.0 9.49 0.200 .100 rl-1326-4700 4700.0 10.6 0.180 .100 rl-1326-5600 5600.0 15.3 0.166 .082 rl-1326-6800 6800.0 17.9 0.151 .082 rl-1326-8200 8200.0 22.9 0.136 .065 rl-1326-10000 10000.0 29.0 0.125 .050 rl-1326-12000 12000.0 32.9 0.114 .050 rl-1326-15000 15000.0 46.8 0.098 .039 rl-1326-18000 18000.0 53.1 0.091 .039 notes: 1. inductances 15% @1 khz 2. saturation current lowers inductance 5% 3. case material diallyl phthalate type sdg-f 4. available taped & reeled for auto insertion 5. leads no. 20 tinned copper 1?long min. 6. manufactured to mil-t-27d* 7. grade 5, class s: -55? to 130?. 8. nonstandard values available 9. 10% tolerance optional * the rl-1325, rl-1326 are designed to meet mil-std-27d, rev. e class s, however, they are not currently listed on the desc qualified products list.
|
