1 www.johansontechnology.com www.johansontechnology.com these high frequency high-q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. these rf chip inductors are compact in size and are provided on tape and reel packaging which makes them ideal for high volume rf applications. they feature a nickel barrier with a top plating of gold for the ceramic core types (all 0402, all 0603, and most 0805 types), and with a top plating of 100% tin for the ferrite core types (0805 size, 470 nh and higher). most inductance values between those listed are available on request. rf w irewound c hip i nductors a pplications cell/pcs modules wireless lan broadband components rfid rf tranceivers cordless phone cable modem computer peripherals bluetooth asdl h ow to o rder example part number: l-07w4n3sv4t is: 0402 wirewound, 4.3 nanohenry, +/- 0.3 nh tolerance, ni / au termination, no marking, paper tape on a 7? reel. * see selection chart on the following pages for available tolerances of each value. device inductor l- size 07 = 0402 14 = 0603 15 = 0805 07 type w = wirewound on ceramic core f = wirewound on ferrite core w value see table 4n3 tolerance * b = 0.2 nh s = 0.3 nh g = 2% j = 5% k = 10% s marking 4 = no marking 4 tape & reel size code tape reel qty 0402 t paper 7? 10,000 0603 e embossed 7? 3,000 0805 e embossed 7? 2,000 t termination v = ni / au for ?w?types, and v = ni / sn for ?f? types v m echanical c haracteristics l w t s 0402 (1005) inches mm .039 .004? (1.00 .10) .022 .004? (0.55 .10) .020 .004? (0.50 .10) .008 .004? (0.20 .10) length width thickness end band 0805 (2012) inches mm .079 .008? (2.00 .20) .049 .008? (1.25 .20) .047 .008? (1.20 .20) .016 .004? (0.40 .10) 0603 (1608) inches mm .063 .008? (1.60 .20) .041 .008? (1.05 .20) .041 .008? (1.05 .20) .014 .004? (0.35 .10) p roduct r ange s ummary eia size (mm) size code l range q factor (typ.) srf (typ.) temperature 0402 (1005) l-07 1.0 - 120 nh 55 (900 mhz) >11 ghz (1.0 nh) -40c to + 125c 0603 (1608) l-14 2.0 - 270 nh 60 (900 mhz) >13 ghz (2.0 n h) -40c to + 125c 0805 (2012) l-15 2.2 - 10,000 nh 60 (500 mhz) >11 ghz (2.2 nh) -40c to + 125c* *-40 deg. c to +85 deg. c for ferrite core types
2 www.johansontechnology.com www.johansontechnology.com 0402 i nductance r ange / e lectrical c haracteristics part number inductance tolerance q (min.) q (typ.) q (typ.) srf (min.) dc resistance rated current @250mhz @250mhz @250mhz @900mhz @1.8ghz (max.) (max.) l-07w1n0sv4t 1.0 nh 0.2 nh, 0.3 nh 13 49 60 6.0 ghz 0.045 ? 1360 ma l-07w1n2sv4t 1.2 nh 0.2 nh, 0.3 nh 13 49 60 6.0 ghz 0.060 ? 1300 ma l-07w1n8sv4t 1.8 nh 0.2 nh, 0.3 nh 16 50 60 6.0 ghz 0.070 ? 1040 ma l-07w1n9sv4t 1.9 nh 0.2 nh, 0.3 nh 16 50 60 6.0 ghz 0.070 ? 1040 ma l-07w2n0sv4t 2.0 nh 0.2 nh, 0.3 nh 16 51 62 6.0 ghz 0.070 ? 1040 ma l-07w2n2sv4t 2.2 nh 0.2 nh, 0.3 nh 18 52 65 6.0 ghz 0.070 ? 960 ma l-07w2n4sv4t 2.4 nh 0.2 nh, 0.3 nh 15 52 65 6.0 ghz 0.068 ? 790 ma l-07w2n7sv4t 2.7 nh 0.2 nh, 0.3 nh 16 50 65 6.0 ghz 0.120 ? 640 ma l-07w3n3sv4t 3.3 nh 0.2 nh, 0.3 nh 19 53 72 6.0 ghz 0.066 ? 840 ma l-07w3n6sv4t 3.6 nh 0.2 nh, 0.3 nh 19 55 76 6.0 ghz 0.066 ? 840 ma l-07w3n9sv4t 3.9 nh 0.2 nh, 0.3 nh 19 60 82 5.8 ghz 0.066 ? 840 ma l-07w4n3jv4t 4.3 nh 0.2 nh, 5%, 10% 18 55 82 6.0 ghz 0.091 ? 700 ma l-07w4n7jv4t 4.7 nh 0.2 nh, 5%, 10% 15 55 82 4.8 ghz 0.130 ? 640 ma l-07w5n1jv4t 5.1 nh 0.2 nh, 5%, 10% 20 58 83 5.8 ghz 0.083 ? 800 ma l-07w5n6jv4t 5.6 nh 0.2 nh, 5%, 10% 20 61 89 5.8 ghz 0.083 ? 760 ma l-07w6n2jv4t 6.2 nh 0.2 nh, 5%, 10% 20 57 80 5.8 ghz 0.083 ? 760 ma l-07w6n8jv4t 6.8 nh 0.2 nh, 5%, 10% 20 58 80 4.8 ghz 0.083 ? 680 ma l-07w7n5jv4t 7.5 nh 0.2 nh, 5%, 10% 22 59 90 5.8 ghz 0.104 ? 680 ma l-07w8n2jv4t 8.2 nh 0.2 nh, 5%, 10% 22 60 87 4.4 ghz 0.104 ? 680 ma l-07w8n7jv4t 8.7 nh 0.2 nh, 5%, 10% 18 60 83 4.1 ghz 0.200 ? 480 ma l-07w9n0jv4t 9.0 nh 0.2 nh, 5%, 10% 22 60 83 4.2 ghz 0.104 ? 680 ma l-07w9n5jv4t 9.5 nh 0.2 nh, 5%, 10% 18 55 76 4.0 ghz 0.200 ? 680 ma l-07w10njv4t 10.0 nh 2%, 5%, 10% 21 56 76 3.9 ghz 0.195 ? 480 ma l-07w11njv4t 11.0 nh 2%, 5%, 10% 24 61 86 3.7 ghz 0.120 ? 640 ma l-07w12njv4t 12.0 nh 2%, 5%, 10% 24 58 77 3.6 ghz 0.120 ? 640 ma l-07w13njv4t 13.0 nh 2%, 5%, 10% 24 60 77 3.5 ghz 0.210 ? 560 ma l-07w15njv4t 15.0 nh 2%, 5%, 10% 24 61 86 3.3 ghz 0.172 ? 560 ma l-07w16njv4t 16.0 nh 2%, 5%, 10% 24 58 77 3.1 ghz 0.220 ? 560 ma l-07w18njv4t 18.0 nh 2%, 5%, 10% 24 58 77 3.1 ghz 0.230 ? 420 ma l-07w19njv4t 19.0 nh 2%, 5%, 10% 24 58 77 3.0 ghz 0.202 ? 480 ma l-07w20njv4t 20.0 nh 2%, 5%, 10% 24 54 74 3.0 ghz 0.250 ? 420 ma l-07w22njv4t 22.0 nh 2%, 5%, 10% 24 54 73 2.7 ghz 0.300 ? 400 ma l-07w23njv4t 23.0 nh 2%, 5%, 10% 24 55 73 2.7 ghz 0.214 ? 400 ma l-07w24njv4t 24.0 nh 2%, 5%, 10% 24 54 74 2.7 ghz 0.300 ? 400 ma l-07w27njv4t 27.0 nh 2%, 5%, 10% 24 55 75 2.5 ghz 0.298 ? 400 ma l-07w30njv4t 30.0 nh 2%, 5%, 10% 24 52 64 2.3 ghz 0.300 ? 400 ma l-07w33njv4t 33.0 nh 2%, 5%, 10% 24 52 64 2.3 ghz 0.350 ? 400 ma l-07w36njv4t 36.0 nh 2%, 5%, 10% 24 52 64 2.3 ghz 0.403 ? 320 ma l-07w39njv4t 39.0 nh 2%, 5%, 10% 24 51 48 2.1 ghz 0.550 ? 320 ma l-07w40njv4t 40.0 nh 2%, 5%, 10% 24 51 48 2.3 ghz 0.438 ? 320 ma l-07w43njv4t 43.0 nh 2%, 5%, 10% 24 50 46 2.0 ghz 0.810 ? 100 ma l-07w47njv4t 47.0 nh 2%, 5%, 10% 22* 50 46 2.1 ghz 0.830 ? 100 ma l-07w51njv4t 51.0 nh 2%, 5%, 10% 22* 49 n/a 1.7 ghz 0.820 ? 100 ma l-07w56njv4t 56.0 nh 2%, 5%, 10% 22* 49 n/a 1.7 ghz 0.970 ? 100 ma l-07w68njv4t 68.0 nh 2%, 5%, 10% 22* 42 n/a 1.6 ghz 1.120 ? 100 ma l-07w82njv4t 82.0 nh 2%, 5%, 10% 16** 39 n/a 1.5 ghz 1.250 ? 100 ma l-07wr10jv4t 100.0 nh 2%, 5%, 10% 16** 36 n/a 1.3 ghz 2.520 ? 100 ma l-07wr12jv4t 120.0 nh 2%, 5%, 10% 14** 35 n/a 1.1 ghz 2.660 ? 100 ma * 200 mhz ** 150 mhz note: most inductance values between those listed above are available on request.
3 www.johansontechnology.com www.johansontechnology.com parts shown are for one tolerance only. tolerances available are as shown in the ?tolerance? column. note: most inductance values between those listed above are available on request. 0603 i nductance r ange / e lectrical c haracteristics part number inductance l/q test tolerance q (min.) srf (min.) dc resistance rated current @ l/q freq. freq. @l/q freq @l/q freq (max.) (max.) l-14w1n6sv4e 1.6 nh 250 mhz 0.2 nh, 0.3 nh 14 7.0 ghz 0.080 ? 700 ma l-14w2n0sv4e 2.0 nh 250 mhz 0.2 nh, 0.3 nh 16 6.9 ghz 0.080 ? 700 ma l-14w3n6sv4e 3.6 nh 250 mhz 0.2 nh, 0.3 nh 20 6.0 ghz 0.080 ? 700 ma l-14w3n9sv4e 3.9 nh 250 mhz 0.2 nh, 0.3 nh 22 5.9 ghz 0.080 ? 700 ma l-14w4n3sv4e 4.3 nh 250 mhz 0.2 nh, 0.3 nh 22 5.8 ghz 0.060 ? 700 ma l-14w4n7sv4e 4.7 nh 250 mhz 0.2 nh, 0.3 nh 20 5.8 ghz 0.110 ? 700 ma l-14w5n1sv4e 5.1 nh 250 mhz 0.2 nh, 5%, 10% 23 5.4 ghz 0.110 ? 700 ma l-14w6n8jv4e 6.8 nh 250 mhz 0.2 nh, 5%, 10% 30 4.6 ghz 0.110 ? 700 ma l-14w8n2jv4e 8.2 nh 250 mhz 0.2 nh, 5%, 10% 30 4.8 ghz 0.100 ? 700 ma l-14w8n7jv4e 8.7 nh 250 mhz 2%, 5%, 10% 30 4.6 ghz 0.120 ? 700 ma l-14w10njv4e 10.0 nh 250 mhz 2%, 5%, 10% 31 4.0 ghz 0.130 ? 700 ma l-14w12njv4e 12.0 nh 250 mhz 2%, 5%, 10% 35 4.0 ghz 0.130 ? 700 ma l-14w15njv4e 15.0 nh 250 mhz 2%, 5%, 10% 35 3.1 ghz 0.170 ? 700 ma l-14w18njv4e 18.0 nh 250 mhz 2%, 5%, 10% 38 3.0 ghz 0.170 ? 700 ma l-14w22njv4e 22.0 nh 250 mhz 2%, 5%, 10% 38 3.0 ghz 0.220 ? 700 ma l-14w27njv4e 27.0 nh 250 mhz 2%, 5%, 10% 40 2.8 ghz 0.220 ? 600 ma l-14w33njv4e 33.0 nh 250 mhz 2%, 5%, 10% 43 2.3 ghz 0.220 ? 600 ma l-14w39njv4e 39.0 nh 250 mhz 2%, 5%, 10% 43 2.2 ghz 0.250 ? 600 ma l-14w47njv4e 47.0 nh 200 mhz 2%, 5%, 10% 40 2.0 ghz 0.280 ? 600 ma l-14w56njv4e 56.0 nh 200 mhz 2%, 5%, 10% 40 1.9 ghz 0.310 ? 600 ma l-14w68njv4e 68.0 nh 200 mhz 2%, 5%, 10% 40 1.7 ghz 0.340 ? 600 ma l-14w72njv4e 72.0 nh 150 mhz 2%, 5%, 10% 35 1.7 ghz 0.490 ? 400 ma l-14w82njv4e 82.0 nh 150 mhz 2%, 5%, 10% 35 1.7 ghz 0.540 ? 400 ma l-14wr10jv4e 100.0 nh 150 mhz 2%, 5%, 10% 35 1.4 ghz 0.630 ? 400 ma l-14wr12jv4e 120.0 nh 150 mhz 2%, 5%, 10% 35 1.3 ghz 0.650 ? 300 ma l-14wr15jv4e 150.0 nh 150 mhz 2%, 5%, 10% 35 1.0 ghz 0.920 ? 280 ma l-14wr18jv4e 180.0 nh 100 mhz 2%, 5%, 10% 30 1.0 ghz 1.25 ? 240 ma l-14wr22jv4e 220.0 nh 100 mhz 2%, 5%, 10% 30 1.0 ghz 1.70 ? 200 ma l-14wr27jv4e 270.0 nh 100 mhz 2%, 5%, 10% 30 1.0 ghz 1.80 ? 170 ma
4 www.johansontechnology.com www.johansontechnology.com 0805 i nductance r ange / e lectrical c haracteristics part number inductance l test tolerance q (min.) q test srf (min.) dc resistance rated current @l test freq. freq. @ l test freq. @q test freq. freq. (max.) (max.) l-15w2n2sv4e 2.2 nh 250 mhz 0.2 nh, 0.3 nh 50 1000 mhz >6000 mhz 0.06 ? 800 ma l-15w2n7sv4e 2.7 nh 250 mhz 0.2 nh, 0.3 nh 35 1000 mhz >6000 mhz 0.08 ? 800 ma l-15w3n3sv4e 3.3 nh 250 mhz 0.2 nh, 0.3 nh 60 1000 mhz >6000 mhz 0.08 ? 800 ma l-15w3n9sv4e 3.9 nh 250 mhz 0.2 nh, 0.3 nh 60 1000 mhz >6000 mhz 0.06 ? 600 ma l-15w4n7sv4e 4.7 nh 250 mhz 0.2 nh, 0.3 nh 60 1000 mhz 5800 mhz 0.06 ? 600 ma l-15w5n6jv4e 5.6 nh 250 mhz 0.2 nh, 5%, 10% 60 1000 mhz 5800 mhz 0.08 ? 600 ma l-15w6n8jv4e 6.8 nh 250 mhz 0.2 nh, 5%, 10% 60 1000 mhz 5500 mhz 0.06 ? 600 ma l-15w8n2jv4e 8.2 nh 250 mhz 0.2 nh, 5%, 10% 60 1000 mhz 5500 mhz 0.06 ? 600 ma l-15w10njv4e 10.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 4800 mhz 0.08 ? 600 ma l-15w12njv4e 12.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 4100 mhz 0.08 ? 600 ma l-15w15njv4e 15.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 3600 mhz 0.08 ? 600 ma l-15w18njv4e 18.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 3400 mhz 0.08 ? 600 ma l-15w22njv4e 22.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 3300 mhz 0.10 ? 600 ma l-15w27njv4e 27.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 2600 mhz 0.12 ? 600 ma l-15w33njv4e 33.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 2400 mhz 0.15 ? 500 ma l-15w39njv4e 39.0 nh 250 mhz 2%, 5%, 10% 60 500 mhz 2100 mhz 0.18 ? 500 ma l-15w47njv4e 47.0 nh 200 mhz 2%, 5%, 10% 60 500 mhz 1700 mhz 0.15 ? 500 ma l-15w56njv4e 56.0 nh 200 mhz 2%, 5%, 10% 60 500 mhz 1600 mhz 0.25 ? 500 ma l-15w68njv4e 68.0 nh 200 mhz 2%, 5%, 10% 60 500 mhz 1450 mhz 0.27 ? 500 ma l-15w82njv4e 82.0 nh 150 mhz 2%, 5%, 10% 60 500 mhz 1350 mhz 0.32 ? 500 ma l-15wr10jv4e 100 nh 150 mhz 2%, 5%, 10% 60 250 mhz 1200 mhz 0.43 ? 500 ma l-15wr12jv4e 120 nh 150 mhz 2%, 5%, 10% 50 250 mhz 1100 mhz 0.48 ? 500 ma l-15wr15jv4e 150 nh 100 mhz 2%, 5%, 10% 50 250 mhz 950 mhz 0.56 ? 400 ma l-15wr18jv4e 180 nh 100 mhz 2%, 5%, 10% 50 250 mhz 900 mhz 0.78 ? 400 ma l-15wr22jv4e 220 nh 100 mhz 2%, 5%, 10% 50 250 mhz 860 mhz 1.00 ? 400 ma l-15wr27jv4e 270 nh 100 mhz 2%, 5%, 10% 45 250 mhz 850 mhz 1.46 ? 350 ma l-15wr33jv4e 330 nh 100 mhz 2%, 5%, 10% 45 250 mhz 800 mhz 1.65 ? 300 ma l-15wr39jv4e 390 nh 100 mhz 2%, 5%, 10% 45 250 mhz 780 mhz 2.20 ? 210 ma l-15fr47jv4e 470 nh 25 mhz 5%, 10% 45 100 mhz 375 mhz 0.95 ? 500 ma l-15fr56jv4e 560 nh 25 mhz 5%, 10% 45 100 mhz 340 mhz 1.10 ? 450 ma l-15fr68jv4e 680 nh 25 mhz 5%, 10% 35 100 mhz 188 mhz 1.20 ? 400 ma l-15fr82jv4e 820 nh 25 mhz 5%, 10% 35 100 mhz 215 mhz 1.50 ? 300 ma l-15f1r0jv4e 1000 nh 25 mhz 5%, 10% 35 50 mhz 200 mhz 2.13 ? 180 ma l-15f1r2jv4e 1200 nh 8 mhz 5%, 10% 15 8 mhz 200 mhz 2.38 ? 150 ma l-15f1r5jv4e 1500 nh 8 mhz 5%, 10% 15 8 mhz 200 mhz 2.90 ? 130 ma l-15f1r8jv4e 1800 nh 8 mhz 5%, 10% 15 8 mhz 120 mhz 3.00 ? 120 ma l-15f2r2jv4e 2200 nh 8 mhz 5%, 10% 15 8 mhz 110 mhz 3.10 ? 110 ma l-15f2r7jv4e 2700 nh 8 mhz 5%, 10% 15 8 mhz 100 mhz 3.50 ? 100 ma l-15f3r3jv4e 3300 nh 8 mhz 5%, 10% 15 8 mhz 70 mhz 2.30 ? 210 ma l-15f3r9jv4e 3900 nh 8 mhz 5%, 10% 15 8 mhz 60 mhz 2.50 ? 200 ma l-15f4r7jv4e 4700 nh 8 mhz 5%, 10% 15 8 mhz 50 mhz 2.80 ? 180 ma l-15f5r6jv4e 5600 nh 8 mhz 5%, 10% 15 8 mhz 45 mhz 3.00 ? 160 ma l-15f6r8jv4e 6800 nh 8 mhz 5%, 10% 15 8 mhz 45 mhz 3.20 ? 130 ma l-15f8r2jv4e 8200 nh 8 mhz 5%, 10% 15 8 mhz 40 mhz 3.50 ? 120 ma l-15f10rjv4e 10000 nh 8 mhz 5%, 10% 10 8 mhz 40 mhz 5.00 ? 80 ma parts shown are for one tolerance only. tolerances available are as shown in the ?tolerance? column. note: most inductance values between those listed above are available on request.
5 www.johansontechnology.com www.johansontechnology.com rf c haracteristics c haracteristics (t ypical ) q / esr measured with an agilent 4287a impedance analyzer and a 16193a fixture. srf measured with a hp 8720c vector network analyzer using a series-through fixture. q vs frequency for 0402 size 0 20 40 60 80 100 120 140 160 180 100 1000 10000 frequency (mhz) q 2.2 nh 3.3 nh 5.6 nh 8.2 nh 15 nh 36 nh l vs frequency for 0402 size 0 10 20 30 40 50 60 100 1000 10000 frequency (mhz) inductance (nh) 2.2 nh 3.3 nh 5.6 nh 8.2 nh 15 nh 36 nh q vs frequency for 0603 size 0 20 40 60 80 100 120 100 1000 10000 frequency (mhz) q 2.0 nh 10 nh 22 nh 100 nh 180 nh l vs frequency for 0603 size 0 50 100 150 200 250 300 350 400 100 1000 10000 frequency (mhz) inductance (nh) 2.0nh 10 nh 22 nh 100 nh 180 nh
6 www.johansontechnology.com item condition specification operating temperature range ceramic core: -40c to +125c ferrite core: -40c to +85c coefficient of expansion ceramic core: 7.2 x 10 -6 / deg. c (typ.) ferrite core: 10 x 10 -6 / deg. c (typ.) inductance and tolerance measuring frequency : as shown in product table measuring temperature : + 25 c within specified tolerance quality factor insulation resistance measured at 100v dc between inductor terminals and center of case. 1000 mega ohms minimum dielectric withstanding voltage measured at 500v ac between inductor terminals and center of case for a maximum of 1 minute. no damage occurs when the test voltage is applied. temperature coefficient of induc- tance (tcl) over - 40 c to + 85c at frequency specified in product table. ceramic core: +25 to +125 ppm / c ferrite core: +25 to +500 ppm / c l1 - l2 l1(t1-t2) component adhesion (push test) the component shall be reflow soldered onto a p. c. board ( 230 c 5c for 20 seconds ). then a dynometer force gauge shall be applied to any side of the component. 0402 series - 350g 0603 series - 1.0kg 0805 series - minimum 2kg for ceramic core parts and 1 kg for ferrite core parts. drop test the inductor shall be dropped two times on a concrete floor or a vinyl tile from a 1 meter height. change in inductance: no more than 5% change in q: no more than 10% change in appearance: without distinct damage thermal shock test each cycle shall consist of 30 minutes at -40 c followed by 30 minutes at +85 c with a 20-second maximum transition time between temperature extremes. test duration is 10 cycles. m echanical & e nvironmental c haracteristics x 10 6 (ppm /c) tcl =
7 www.johansontechnology.com item condition specification solderability dip pads in flux and dip in solder pot (63sn / 37pb) at 230 c 5c for 5 seconds. a minimum of 80% of the metalized area must be covered with solder. resistance to soldering heat dip the components into flux and dip into solder pot containing 63sn / 37pb at 260 c 5 c for 5 2 seconds. change in inductance: no more than 5% change in q: no more than 10% change in appearance: without distinct damage vibration (random) inductors shall be randomly vibrated at amplitude of 1.5mm and frequency of 10 - 55 hz: 0.04 g / hz for a minimum of 15 minutes per axis for each of the three axes. cold temperature storage inductors shall be stored at temperature of -40 c 2 c for 48 2 hours. then inductors shall be subjected to standard atmospheric conditions for 1 hour. after that, measurement shall be made. high temperature storage inductors shall be stored at temperature of 125 c 2 c for 48 2 hours. then inductors shall be subjected to standard atmospheric conditions for 1 hour. after that, measurement shall be made. moisture resistance inductors shall be stored in the chamber at 45 c at 90 - 95 r. h. for 240 hours. then inductors are to be tested after 2 hours at room temperature. inductors shall not have a shorted or open winding. high temperature with loaded inductors shall be stored in the chamber at +85 c for 1000 hours with rated current applied. inductors shall be tested at the beginning of test at 500 hours and 1000 hours. then inductors are to be tested after 1 hour at room temperature. static humidity subjected to 85c, 85% relative humidity for 100 hours. inductors are to be tested after being air dried for two hours. inductance must not change more than the stated tolerance. resistance to solvent must withstand 6 minutes of alcohol or water. there must be no case deformation,change in dimensions, or obliteration of marking. m echanical & e nvironmental c haracteristics
8 www.johansontechnology.com packing quantity reel dimensions type pcs / reel l-07 10,000 l-14 3,000 l-15 2,000 13 178 2 2 0.5 70 min dimensions (unit: m/m) tape dimensions type a b t l-07 0.70 1.20 0.70 l-14 1.25 1.80 1.20 l-15 1.42 2.26 1.40 t 0.05 0.3 0.05 a 0.1 4 0.1 4 0 .1 2 0.05 8 0.2 3.50 0.05 1.75 0.05 b 0.1 dimensions (unit: m/m) recommended pattern type a b c l-07 1.20 0.45 0.65 l-14 1.90 0.65 1.00 l-15 2.60 0.75 1.20 c b a - remark: 1) blank length: 160 mm minimum for loading. 2) blank length: 80 mm minimum for unloading. p acking i nformation
|
