jv-n specifications compact flat power relay for heater loads jv-n relays 22 16 10.9 .866 .630 .429 compliance with rohs directive features ?high 16 a capacity the contacts are high capacity 16a, 125 v ac. ?compact, ?t type with low 10.9 mm .429 inch height compact ?t type with low surface area of 16 22 mm .630 .866 inch and height of 10.9 mm .429 inch . ?high sensitivity at 200 mw high sensitivity at 200 mw coil power consumption. ?represses contact terminal heat the contact terminals are larger and thicker compared to the existing jv relay. this limits the rise in temperature of the terminals when there is a large current ?wing to approx. 28 c 62 f (normal current of 16 a). ?conforms to the various safety standards ul/csa, t?v approved. about cd-free contacts we have introduced cadmium free type products to reduce environmental hazardous substances. (the suf? ? should be added to the part number) please replace parts containing cadmium with cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. contact coil #1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. remarks * speci?ations will vary with foreign standards certi?ation ratings. * 1 excluding contact bounce time * 2 excluding contact bounce time, without diode * 3 by resistive method; nominal voltage applied to the coil; contact carrying current: 16a, at 70 c 158 f * 4 nominal voltage applied to the coil, at 60 c 140 f * 5 half-wave pulse of sine wave: 11 ms; detection time: 10 s * 6 half-wave pulse of sine wave: 6 ms * 7 detection time: 10 s * 8 refer to 6. conditions for operation, transport and storage mentioned in ambient envi r onment . characteristics arrangement 1 form a initial contact resistance, max. (by voltage drop 6 v dc 1 a) max. 100 m ? contact material agsno 2 type rating (resistive load) nominal switching capacity 16 a 125 v ac, 10 a 277 v ac 10 a 30 v dc, 10 a 125 v ac max. switching power 2,770 va, 300 w max. switching voltage 277 v ac, 30 v dc max. switching current 16 a (ac 125 v), 10 a (dc) min. switching capacity #1 (reference value) 100 ma, 5 v dc expected life (min. ope.) mechanical (at 180 cpm) 2 10 7 electrical at resistive load (at 20 cpm) sealed type 16 a 125 v ac 3 10 4 10 a 30 v dc 10 5 flux-resistant type 10 a 125 v ac 10 5 nominal operating power 200 mw (dc 4.5 to 48 v) 600 mw (dc 100 v) max. operating speed 20 cpm operate time* 1 (at nominal voltage) max. 12 ms (dc 4.5 v to 48 v) max. 8 ms (dc 100 v) release time* 2 (at nominal voltage) max. 5 ms initial insulation resistance min. 1,000 m ? (at 500 v dc) initial breakdown voltage (detection current: 10 ma between open contacts 1,000 vrms for 1 min. between contacts and coil 2,500 vrms for 1 min. surge voltage between contact and coil 4,500 v temperature rise max. 45 c (dc 4.5 v to 48 v) * 3 max. 55 c (dc 100 v)* 4 conditions in case of operation, transport and storage* 8 ambient temperature ?0 to 70 c ?0 to 158 f (dc 4.5 to 48 v) ?0 to 60 c ?0 to 140 f (dc 100v) humidity: 5 to 85 % r.h. (note freezing and condensing at low temperature) air pressure: 86 to 106 kpa shock resistance functional 200 m/s 2 {20g}* 5 destructive 1,000 m/s 2 {100g}* 6 vibration resistance functional 10 to 55 hz * 7 at double amplitude of 1.6 mm destructive 10 to 55 hz at double amplitude of 2 mm unit weight approx. 8g .28 oz all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
jv-n types and coil data (at 20 c 68 f ) dimensions mm inch reference data part no. nominal voltage, v dc pick-up voltage v dc (max.) drop-out voltage v dc (min.) coil resistance, w ( 10%) nominal operating current, ma ( 10%) nominal operating power, mw max. allowable voltage, v dc sealed type flux-resistant type jvn1a-4.5v-f jvn1af-4.5v-f 4.5 3.375 0.23 101 44.4 200 6.75 jvn1a-6v-f jvn1af-6v-f 6 4.5 0.3 180 33.3 200 9 jvn1a-9v-f jvn1af-9v-f 9 6.75 0.45 405 22.2 200 13.5 jvn1a-12v-f jvn1af-12v-f 12 9 0.6 720 16.7 200 18 jvn1a-18v-f jvn1af-18v-f 18 13.5 0.9 1,620 11.1 200 27 jvn1a-24v-f JVN1AF-24V-F 24 18 1.2 2,880 8.3 200 36 jvn1a-48v-f jvn1af-48v-f 48 36 2.4 11,520 4.2 200 72 jvn1a-100v-f jvn1af-100v-f 100 60 4 16,600 6 600 110 typical applications ?av equipment: tv s, vtr s, etc. ?oa equipment ?ha equipment ordering informations contact arrangement protective construction ul/csa, t?v approved type is standard. please inquire about the previous products (cadmium containing parts). coil voltage (dc) 4.5, 6, 9, 12,18, 24, 48, 100 v contact material f: agsno 2 type 1a: 1 form a nil: f: sealed type flux-resistant type ex. jvn 1a 4.5 vf f 22 10.16 17.78 12.7 10.5 4 0.4 0.5 1.6 16 .866 .400 .700 .500 .413 .157 .016 .020 .063 .630 dimension: gener al toler ance max. 1mm .039 inch : 0.2 .008 1 to 5mm .039 to .197 inch : 0.3 .012 min. 5mm .197 inch : 0.4 .016 com no pc board pattern (r) (r) 10.16 2.0 1.0 2.0 17.78 2-0.9 dia. 12.7 .400 .079 .039 .079 .700 2-.035 dia. .500 1. max. switching power 2 . operate/release time sample: jvn1af-12 v-f, 6 pcs. 3. coil temperature rise sample: jvn1af-12 v-f, 6 pcs. point measured: coil inside contact current: 16 a 1 10 100 contact voltage, v contact current, a 1,000 10 16 100 ac resistive load 0 80 100 120 140 160 1 2 3 4 5 6 7 8 9 10 max. min. x max. release time coil applied voltage, %v operate & release time, ms operate time min. x ambient temperature 30 c ambient temperature 70 c coil applied voltage, %v temperature rise, c 80 100 120 140 160 20 10 30 40 50 0 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
jv-n for cautions f or us e , see rel a y t e c hnical in f ormation . 4. ambient temperature characteristics sample: jvn1af-12 v-f, 6 pcs. ?0 20 0 20 10 pick-up voltage ambient temperature, c drop-out voltage variation ratio, % ?0 ?0 20 40 60 80 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
|
