108 (axr1) coaxial connectors rf (coaxial) connectors for cellular phone plug receptacle features 1. space-saving receptacle with low pro?e the connector is provided with a large- diameter guide that can absorb up to ?mm horizontal mating deviation while having the compact dimensions of 7.5mm (w) x 5.9mm (l) x 3.0mm (h). 2. excellent frequency characteristics suitable for 2ghz operation and for use in next-generation mobile phones. ?vswr: max. 1.30 (1 to 2 ghz) ?insertion loss: max. 0.35db (1 to 2 ghz) ?isolation: min. 26.2db (1 to 2 ghz) 3. floating mechanism absorbs mating deviation the ?ating mechanism absorbs mating deviation in the horizontal and vertical directions of ?mm and ?mm respectively on the plug side. the receptacle is equipped with an over- stroke stopper and guides to facilitate equipment design. receptacle 4. switching function includes a switching function that can be used to switch the hands-free goods to the vehicle antenna, and for switching circuits with automatic inspection equipment. 5. design prevents solder ?x from creeping up. applications 1. connecting mobile phones to hands- free goods. 2. automatic inspection equipment used in mobile phone assembly processes. one-touch-installable to product enclosures (hands-free goods or inspection jigs) 5.8 3.0 5.9 7.5 directionally-distinguishable shape (protection from mounting in the wrong direction) large-diameter guide for reliable fitting of a roughly inserted plug vertical: 2.0mm the following dimensional limits apply when fitting to the receptacle horizontal: 1.0mm contact floating section body fixing section contact floating in the shaft direction 2mm body fixing section floating section (shaft) over-stroke stopper guide mated a contact a contact b contact b contact terminal holder is equipped with a flux hold. bottom surface has a molded cover construction. product types product part no. packing quantity inner carton outer carton receptacle AXR111221V 3,000 pcs. (1 reel) 15,000 pcs. plug (set) axr112225 2,000 pcs. axr1.fm 108 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@?????p?q???s?a
109 (axr1) specifications 1. characteristics 2. material and surface treatment mm general tolerance: 0.3 item speci cations conditions electrical characteristics insulation resistance (initial) min. 1,000m ? using 500v dc megger (applied for 1min.) initial breakdown voltage 250 v ac for 1min. rated voltage is applied for one minute and check for short circuit or damage with a detection current of 1ma. contact resistance (initial) common to n.c. max. 50m ? measured based on the hp4338b measurement method of jis c 5402. common to n.o.: without conductor resistance of plug s cord. common to n.o. max. 70m ? shield to shield max. 10m ? high frequency characteristics nominal impedance 50 ? vswr (initial) common to n.c. max. 1.30 (to 2ghz) measurement method in accordance with matsushita electric works standards. common to n.o. max. 1.30 (to 2ghz) measurement method in accordance with matsushita electric works standards. insertion loss (initial) common to n.c. max. 0.35db (to 2ghz) measurement method in accordance with matsushita electric works standards. common to n.o. max. 0.45db (to 2ghz) measurement method in accordance with matsushita electric works standards. isolation (initial) min. 26.2db (to 2ghz) measurement method in accordance with matsushita electric works standards. environmental characteristics ambient temperature 40 to +85 c no freezing at low temperature lifetime characteristics insertion and removal life mechanical: 30,000 times applicable wire rg174 or equivalent portion material surface receptacle resin-molding portion heat resistant resin (ul94v-0) black metallic parts copper alloy contact portion: au plating over ni substrate terminal portion: au plating over ni substrate (except for cut surface of the terminal) plug body plug case heat resistant resin (ul94v-0) black plug metal case copper alloy au plating over ni substrate plug post copper alloy au plating over ni substrate centering guide copper alloy ni plating case copper or zinc alloy ni plating coil spring stainless steel ring copper alloy ni plating cover stainless steel dimensions receptacle aa 0.9 0.6 4.7 0.9 0.6 5.50 common terminal 5.0 dia. n.c. terminal 7.5 5.8 1.55 0.40 3.0 2.0 0.1 1.25 axr1.fm 109 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@?????p?q???s?a
110 (axr1) mm general tolerance: 0.3 plug (assembled condition) 7.0 4.7 10.0 dia. ( 16.5 ) 9.2 4.3 7.3 1.3 3.1 dia. 1.3 2.3 dia. 8.8 dia. 9.9 c 0.3 0.4 dia. (plug post diameter) mm embossed tape and reel tape dimensions reel dimensions ( 4.0 ) ( 2.0 ) ( 7.5 ) pull-out direction 16.0 0.3 1.75 0.1 8.0 0.1 1 .5 d ia . + 0 .1 0 top cover tape embossed carrier tape 370 dia. 16.4 +2 0 connector orientation with respect to direction of progress of embossed tape receptacle type direction of tape progress axr1.fm 110 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@?????p?q???s?a
111 (axr1) notes 1. receptacle 1) about attaching the cover the construction of this product is not drip proof or dustproof. we recommend that you cover the receptacle to prevent entry of foreign matter such as dust and dirt, and liquids such as perspiration. the cover should be durable enough to withstand repeated, long-term use, and should not detach readily from the unit. 2) pcb design use the recommended design to ensure that the mechanical strength of the soldered section of the receptacle terminal is maintained. 2. plug 1) the amount of oating on the plug side of the product is 1.0mm in the radial direction, and 0.4mm to 2.0mm in the axial direction. when designing the bodies of hands-free goods or inspection jigs, the clearance with the receptacle on the body of the mobile phone must be within these limits. also, use a construction for the body that prevents over stroke in the axial direction. 2) when designing hands-free goods and inspection jigs, provide a means of securing the cord so that stress does not act on the plug body if the cord is pulled. 3) the construction is such that the edge section of the plug is exposed when the plug is xed to the hands-free goods. provide warnings in the instruction manual to alert users to the fact that excessive force applied to the edge section of the plug can cause damage. 4) soldering take care to ensure that solder ux does not adhere to the contacts. this can result in a poor electrical connection. take care not to melt the resin sections with the soldering iron. take care to avoid formation of solder bulbs, and to avoid shorting the plug post to the case (3) with solder. 5) before soldering the coaxial cable, crimp the cable to the case using the ring to secure it and ensure that no load is applied to the soldered parts of the coaxial cable. 6) this product is designed so that it can be secured to either hands-free goods or an inspection jig with a one-touch operation. when it is installed to the body of such a unit, ensure that it is secured rmly. regarding general notes please refer to page 8 and page 9. case (3) plug post axr1.fm 111 ?y?[?w ?q?o?o?r?n?p?q???q?q??@???j??@?????p?q???s?a
|