32 001 variation code 001 = receptacle 002 = plug-card 005 = plug-board varicon ? series 8218 ? 0.050" staggered dual row features ? high contact density ? for parallel or perpendicular p.c. card mounting ? high mounting density (.050" centers, minimum) ? nylon end sections for mounting and card guidance ? mounting hardware supplied with connector ? mates with 8219 series technical specifications ordering code 00 8218 076 000 contact code current rating: 5 amperes, maximum contact resistance: 0.005 ohm, maximum contact material and plating: phosphor bronze nickel plate, 30 to 50 microinches followed by gold plate, 10 to 20 microinches insulator material: diallyl phthalate, glass-filled, flame resistant, end guides: nylon insulation resistance: 5,000 megohms, minimum dielectric withstanding voltage: sea level: 1000 volts rms 3.4" hg: 500 volts rms insertion/withdrawal force: 2 to 16 ounces per contact variant 002 right angled contacts 000 = 60 8200 16 33 p.c. tail 000 = 60 8200 16 63 p.c. tail variants 001 and 005 722 = 60 8200 16 13 wire hole tail 736 = 60 8200 16 33 p.c. tail (x = 9/32", y = 1/4") 753 = 60 8200 16 53 p.c. tail (x = 1/8", y = 3/32") 771 = 60 8200 16 63 p.c. tail (x = 31/64", y = 29/64") with keying pins 011 = receptacle 012 = plug-card/pin inserted in odd position 013 = plug-card/pin inserted in even position 017 = plug-board with keying holes 021 = receptacle 022 = plug-card/pin inserted in odd position 023 = plug-card/pin inserted in even position 027 = plug-board number of contacts 002 to 076 for connectors without center guide
33 varicon ? series 8218 ? 0.050" staggered dual row receptacle 001 ? mates with plugs 002 and 005 mounting layout dimensions variation 001 and 005 variation 002 receptacle variation 001 plug variation 002 plug variation 005 determine polarization pin location from views. p = specify location by contact # where polarizing pin must be inserted. h = specify location by contact # where contact must be omitted for mating. typical example: 00-8218-024-721-001-p17 (polarizing pin mtd. in position 17) 00-8218-024-721-005-h17 (polarizing hole is in position 17) polarization keying ordering no. 60-8218-4715-00-152 minimum center to center spacing for adjustment plugs abcde (no. of contacts x ?a? dimension ?a? dimension ?a? dimension ?a? dimension 0.050") - 0.050" + 0.300" + 0.440" + 0.550" + 0.690" (inches)
|