a52 fpc connectors for cardbus pc cards ic13 series pc card standard compliant designed so that screw heads do not protrude from main body card in ejected condition features 1. thinner equipment designs are possible (1) connections are made to the main board via the fpc ( * note 1) which permits the pc card slot to be attached directly to the equipment case. the main board can be located at an arbitrary position in the thick direction of the pc card slot which permits thinner equipment designs compared to the on-board type. (2) designed so that the screw ( * note 2) heads do not protrude from the main body when fastening to the equipment case. * note 1: in combination with multiple contact, 0.3 mm pitch fpc connectors of the 80-contact type (fh16 series) * note 2: when m2 screws are used 2. high performance ground (1) configured with 10 cardbus grounds for use with fpc patterns and fpc connectors. (2) the entire back surface of the fpc is configured with a ground mesh pattern. 3. high performance, dual-end, 2-point push card ejection mechanism these connectors use a dual-end, 2-point push ejection mechanism that pushes the edge surface of the pc card horizontally. this ejection mechanism does not place a stressful load such as a rotational force on the pc card at the time of card ejection and thereby achieves a high level of reliability compared to the 1-point push ejection mechanism. 4. long card ejection makes card removal easy (see photograph to the right.) applications notebook computers, pda, etc.
a53 materials product specifications part card connection portion for ground clips ground plate eject metal fitting metal fitting fpc insulatior contacts material pbt brass stainless steel phosphor bronze stainless steel stainless steel polyamide base finish black contact: gold plating ---------- contact: gold plating ---------- ---------- contact: solder plating remarks ul94v-0 ---------- ---------- ---------- ---------- ---------- ul94v-0 part number ic13t-68d-fej * weight 14.2g item specification conditions 1. withstanding voltage 2. insulation resistance 3. contact resistance 4. mating/un-mating forces 5. mechanical operation no flashover or insulation breakdown. 500 m ohms min. 40 m ? max. (excluding conductor resistance) mating: 39.2n max. un-mating: 6.67n to 39.2n (1) contact resistance:20 m ? max.from initial value (2) no damage, cracks, or parts looseness. 90 v ac/1 minute 100 v dc 1 ma with corresponding connector 10000 cycles at 400 to 600 cycles per hour note 1:includes temperature rise caused by current flow. note 2:the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. ratings operation temperature voltage rating current rating -55 ? to +85 ? (note 1) no. 1 to 68: 30 v ac no. 17, 18, 51, 52: 0.5 a, others: 0.1 a storage temperature operation humidity -40 ? to +70 ? (note 2) relative humidity 95% or less (no condensation)
a54 ordering information corresponding fpc connector mounted condition part number fh16-80s-0.3shw cl no. 586-0613-7 ic13 t - 68 d - fej l 1 3 4 6 2 5 series name: ic13 fpc type: t number of contacts: 68 contact surface of fpc contact portion d: upper surface (fpc connector board lower surface mounting) eject button type fej: foldering type eject button position l: left r: right 1 2 3 5 6 4 note: please refer to the fh16 series catalog for specification details.
a55 left button type part number IC13T-68D-FEJL cl no. 640-1201-6
a56 right button type part number ic13t-68d-fejr cl no. 640-1202-9
a57 b pcb mounting pattern left button type right button type
a58 cn 10 44 11 45 12 46 13 gnd 47 14 48 15 49 16 50 17 51 p 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 cn 1(gnd) 35(gnd) 2 36 3 37 4 38 5 39 6 gnd 40 7 41 8 42 9 43 gnd p 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 p 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 cn 18 52 19 53 20 54 21 55 22 gnd 56 23 57 24 58 25 59 p 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 b fpc connector land no. b connection table cn gnd 26 60 27 61 28 62 29 gnd 63 30 64 31 65 32 66 33 67 34(gnd) 68(gnd) note: see the fh16-80s-0.3shw catalog for the land dimensions.
a59 b method of mounting to the equipment 1. insert the ic13 fpc portion to the fh16 connector (i.e., fpc connector) on an upward angle. 3. fasten the pc card slot to the case with screws. (m2 screws are recommended.) be careful that a load is not placed upon the fpc and fh16 at this time. 2. fasten the lock of the fh16 connector (i.e., fpc connector) and connect the fpc portion. 4. completion note: see the fh16 series catalog for details about the fpc insertion and removal methods. when handling, please hold the portion indicated by the arrow marks with the button pulled out as illustrated in the diagram be low. if the portion connected to the ejection fitting is held with the button pushed in, the fitting might come loose.
|
