key features and benefits pre-polished fiber stub eliminates polishing steps, speeding installation vfl verification during provides installer with a visual signal when optimal crimp process continuity is made and the crimp step can be performed fj interface independent greater reliability; ensures physical fiber contact for consistent free-floating ferrules low return loss, unlike unitary multi-fiber ferrule connectors mechanical crimp cable consistently provides higher than industry standard cable retention retention; requires no adhesive, speeding installation small form factor double the port density in one module space connector at the outlet and in the telecommunications room proven 2.5mm uses standard termination tools and procedures; provides ceramic ferrules strength and reliability robust design protects fibers from mechanical and environmental stress non-optical disconnect network reliability; maintains data transmission under tensile loads rj-45 form factor familiar to end-users, snaps into all m ini -c om outlets and modular patch panels field terminable jack allows assembly of special length patch cords on site module and plug adapterless fewer components to order and inventory flush mount unused ports do not protrude from the wall; can be used with shuttered faceplates focis-6 compliant ensures intermatability with all focis-6 compliant components exceeds tia/eia-568-b.3 network reliability assured as defined by tia keyed solution available provides mechanical network security; limits access to highly sensitive, classified and segregated networks fiber compatibility: 62.5/125m and 50/125m multimode versions available fiber cable type: tight-buffered cable only (3.0mm jacketed or 900m) ferrule type: zirconia ceramic with a pre-polished fiber stub insertion loss: 0.3db typical (62.5/125m), 0.35db typical (50/125m) return loss: greater than 20db visit our website at: www.panduit.com/ncg network connectivity group spec sheet specifications technical information applications small form factor fiber optic jack modules shall be compliant with the tia focis-6 fiber jack interface specification. rj-45 style module shall be field terminable in one module space with no adapter. the jack module shall contain a factory terminated pre-polished multimode fiber, requiring no field polishing and no adhesive. the fibers shall terminate in 2.5mm ferrules with a non-optical disconnect and typical insertion loss of 0.3db (62.5/125m) or 0.35db (50/125m) per connector. ? fiber-to-the-desk: the pre-polished mechanical crimp version of m ini -c om fj fiber optic jack module is the ultimate desktop fiber connector. elimination of end face polishing and adhesive provides for faster installation, especially in remote areas and confined spaces. this reduces installation time over standard field polish fj duplex jack modules by 70%. the 2.5mm ferrule provides robustness required for this demanding environment. the fj interface design is familiar to the end user and is polarized to prevent mismatch of transmit and receive cables. because there is no adapter, unused ports remain flush with the wall and away from damage. the modularity with copper connectors allows for the complete data-communications solution to every workstation in one outlet. keyed network security: four color-coded, keyed configurations of the jack module and plug are available to provide mechanical and visual differentiation to prevent unintentional insertion into adjacent ports. the keyed design provides network security for military, government, financial and educational applications. a universal keyed plug is available for testing purposes. telecommunications room: the high port density of the fj jack module reduces space requirements for fiber terminations in the telecommunications room. this allows the end user to use less rack space and purchase fewer fiber enclosures. the multiple color options allow color coding of different networks or areas of the building for easier troubleshooting. fj o pti -c rimp multimode duplex jack modules 62.5/125m: fjjsmm5c** 50/125m: fjjsmm50c** fj multimode duplex plugs 62.5/125m or 50/125m: fjepgm5c** plug to plug coupler plug to plug coupler: fjgccei (primarily used in testing) replacement ferrule assemblies for fj o pti -c rimp jack modules 62.5/125m: fjjsmmfrl-x 50/125m: fjjsmm50frl-x x = bag of 10 ferrule assemblies, crimp sleeves and dust caps. multimode duplex patch cords and pigtails fj plug to fj plug: f^d6p-6pm? 3mm jacketed fj jack module pigtail: f^d6j-nm? 900mbuffered fj jack module pigtail: f^b6j-nm? fj plug to sc: f^d6p-3m? fj plug to st*: f^d6p-2m? fj plug (keyed w) to sc: f^d6pw-3m? all key type (w, x, y, z) patch cords available. ^available in 62.5/125m (6) and 50/125m (5). ?patch cords are available in 1, 2, 3, 5 and 10 meter lengths, and pigtails are available in 1, 2 and 3 meter lengths. o pti -c rimp termination tooling termination kit: fjmvkit to upgrade from fjkitg, purchase fjqcvr fiber cleaver tool and fvflkit visual fault locator kit. to upgrade from fjmkit, purchase fvflkit visual fault locator kit. m ini -c om ? fj ? o pti -c rimp ? fiber optic jack module ? pre-polished crimp installer tips terminate on tight- buffered cable only. always use fvfl visual fault locator during termination. *st is a registered trademark of lucent technologies. **substitute for colors: ei = electric ivory bl = black bu = blue iw = off white aw = arctic white keyed colors: wbl = keyed w in black xrd = keyed x in red yor = keyed y in orange zyl = keyed z in yellow
m ini -c om ? fj ? o pti -c rimp ? fiber optic jack module ? pre-polished crimp standards compliant connector performance note: multimode tests performed at 850 and 1300nm. tia 455 description test procedure and tia/eia-568-b.3 required performance typical performance 1 flex 100 cycles; -180 to 180 degrees; max. insertion loss 0.75db, min. return loss 20db <0.2db additional loss 2 impact 8 drops from 1.8m; max. insertion loss 0.75db, min. return loss 20db <0.1db additional loss 4 high temperature 4 days at 60c followed by post-conditioning fotp-6; max. insertion loss 0.75db, min. return loss 20db <0.2db additional loss 21 durability 500 mate/unmate cycles; max. insertion loss 0.75db, min. return loss 20db <0.1db additional loss 36 tw i s t 10 cycles; 2.5 cw, 5 ccw, 2.5 cw; max. insertion loss 0.75db, min. return loss 20db <0.1db additional loss 185 coupling strength 7.4 lbs. at 0 degrees; max. insertion loss 0.75db, min. return loss 20db <0.1db additional loss 188 low temperature 4 days at 0c; max. insertion loss 0.75db, min. return loss 20db max. change during test 0.3db <0.1db additional loss 34 insertion loss max. insertion loss 0.75db 0.3db typical (62.5/125m) 0.35db typical (50/125m) 107 return loss 20db minimum return loss >20db 5 humidity 4 days at 90-95% rh and 40c; max. insertion loss 0.75db, min. return loss 20db max. change during test 0.4db <0.1db additional loss 6 cable retention 11.24 lbs. at 0 degrees, 4.4 lbs. at 90 degrees; max. insertion loss 0.75db, min. return loss 20db max. change during test 0.5db <0.2db additional loss 2.17 [55.0] .71 [18.0] .53 [13.4] .25 [6.4] .26 [6.7] .48 [12.1] .48 [12.2] .26 [6.6] .25 [6.4] 1.96 [49.7] keyed w - black keyed x - red keyed y - orange keyed z - yellow dimensions are in inches (dimensions in brackets are in millimeters) panduit corp. tinley park, illinois 60477-3091 customer service: 800-777-3300 technical support: 866-405-6654 email: ncginfo@panduit.com website: www.panduit.com/ncg panduit canada markham, ontario phone: 800-777-3300 panduit europe ltd. london, uk phone: 44 208-601-7200 panduit japan tokyo, japan phone: (81) (3) 3767-7011 panduit asia pacific pte. ltd. republic of singapore phone: (65) 6379 6700 panduit australia pty. ltd. victoria, australia phone: (61) 3-9794 9020 panduit latin america jalisco, mexico phone: (52) (333) 666-2501 network connectivity group contact your local authorized panduit distributor for pricing. for your local sales office call 800-777-3300 for a copy of panduit product warranties, log on to www.panduit.com/warranty for a full line catalog (sa-nc10cb01a), email us at csteam@panduit.com or call customer service at 800-777-3300. ww-fbsp05 07/2003 ? panduit corp. 2003 all rights reserved printed in u.s.a. worldwide subsidiaries and sales offices
|
