unisonic technologies co., ltd dtc114t npn silicon transistor www.unisonic.com.tw 1 of 3 copyright ? 2005 unisonic technologies co., ltd qw-r206-054,b npn digital transistor (built- in bias resistors) ? features * built-in bias resistors that im plies easy on/off applications. * the bias resistors are thin-film resistors with complete isolation to allow negative input. ? equivalent circuit *pb-free plating product number:dtc114tl ? ordering information ordering number pin assignment normal lead free plating package 1 2 3 packing DTC114T-AE3-R dtc114tl-ae3-r sot-23 e b c tape reel dtc114t-al3-r dtc114tl-al3-r sot-323 e b c tape reel dtc114t-an3-r dtc114tl-an3-r sot-523 e b c tape reel ? marking
dtc114t npn silicon transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r206-054,b ? absolute maximum ratings (ta=25 ) parameter symbol ratings unit collector-base voltage v cbo 50 v collector-emitter voltage v ceo 50 v emitter-base voltage v ebo 5 v collector current i c 100 ma sot-23/sot-323 200 mw collector power dissipation sot-523 p c 150 mw junction temperature t j 150 storage temperature t stg -55 ~ +150 note absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (ta=25 c, unless otherwise specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =50a 50 v collector-emitter breakdown voltage bv ceo i c =1ma 50 v emitter-base breakdown voltage bv ebo i e =50a 5 v collector-emitter satu ration voltage v ce(sat) i c =10ma, i b =1ma 0.3 v collector cut-off current i cbo v cb =50v 0.5 a emitter cut-off current i ebo v eb =4v 0.5 a dc current gain h fe v ce =5v, i c =1ma 100 300 600 input resistance r in 7 10 13 k ? current gain bandwidth product f t v ce =10v, i e =-5ma, f=100mhz 250 mhz
dtc114t npn silicon transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r206-054,b ? typical characteristics utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|