specifications subject to change without notice. all dimensions in inches. ? copyright 2008 the connor-winfield corporation bulletin sm118 page 1of2 revision 09 date 04 apr 2009 2111 comprehensive drive aurora, illinois 60505 phone: 630- 851- 4722 fax: 630- 851- 5040 www.conwin.com us headquarters: 630-851-4722 european headquarters: +353-61-472221 description features: 5.0x7.0mm surface mount lvcmos clock oscillator series the connor winfield xxxx - series is a 5.0x7.0mm surface mount, lvcmos, fixed frequency crystal controlled oscillator (xo) designed for applications requiring tight frequency stability, wide temperature range and low jitter. operating at 2.5v or 3.3v supply voltage, the xxxx - series provides an lvcmos output with enable / disable function. the surface mount package is designed for high-density mounting and is optimum for mass production. model xxxx - series 5.0 x7.0mm surface mount package 2.5v or 3.3v operation lvcmos output logic frequency stabilities available: x14x / x24x : +/-20ppm x / x : ppm x / 2x : 0ppm temperature ranges available: x1xx series: 0 to 70c x2xx series: -40 to 85c low jitter <1ps rms tri-state enable/disable tape and reel packaging rohs compliant / lead free / x34x / x44x x11 x21 / x31x / x41x +/-25 x12 x2 / x32x / x42x +/-5 x13x / x23x / x33x / x43x: +/-100ppm x3xx series: 0 to 85c x4xx series: -20 to 70c cw 0704 x123 133.33m model specifications absolute maximum ratings table 1 parameter units minimum nominal maximum units note storage temperature -55 - 125 c supply voltage (vcc) -0.5 - 5.0 vdc operating specifications table 2 parameter minimum nominal maximum units note frequency range (fo) models xx4x, xx1x series 20 - 200 mhz 1 models xx2x, xx3x series 20 - 225 mhz total frequency tolerance (see table 9 for full part number) model xx4x (see table 9) -20 - 20 ppm 2 model xx1x (see table 9) -25 - 25 ppm 2 model xx2x (see table 9) -50 - 50 ppm 2 model xx3x (see table 9) -100 - 100 ppm 2 operating temperature range model x1xx (see table 9) 0 - 70 c model x2xx (see table 9) -40 - 85 c model x3xx (see table 9) 0 - 85 c model x4xx (see table 9) -20 - 70 c supply voltage (vcc) model xxx2 (see table 9) 2.375 2.500 2.625 vdc model xxx3 (see table 9) 3.135 3.3 3.465 vdc supply current (icc) 40 to 79.999 mhz - - 15 ma 80 to 89.999 mhz - - 26 ma 90 to 124.999 mhz - - 36 ma 125 to 164.999 mhz - - 46 ma 165 to 225 mhz - - 61 ma input characteristics table 3 parameter minimum nominal maximum units note enable voltage (high) (vih) 0.7vcc - - vdc 3 disable voltage (low) (vil) - - 0.3vcc vdc 3 enable time - - 2 ms disable time - - 200 ns output disable current (standby current) (icc) - - 10 ua lvcmos output characteristics table 4 parameter minimum nominal maximum units note load - - 15 pf voltage (high) (voh) vcc-0.4 - - vdc (low) (vol) - - 0.4 vdc current (high) (ioh) -8 - -ma (low) (ioh) - - 8 ma duty cycle at 50% of vcc 45 50 55 % rise / fall time 10% to 90% - 1 2 ns start-up time - - 2 ms period jitter - 3 5 ps rms phase jitter (bw=12khz to 20mhz) - 0.5 1 ps rms jitter: peak to peak (bw=10hz to 20mhz) - - 25 ps pk tp pk ssb phase noise at 10hz offset - -60 - dbc/hz ssb phase noise at 100hz offset - -90 - dbc/hz ssb phase noise at 1khz offset - -125 - dbc/hz ssb phase noise at 10khz offset - -140 - dbc/hz ssb phase noise at 100khz offset - -145 - dbc/hz
2111 comprehensive drive aurora, illinois 60505 phone: 630-851-4722 fax: 630-851-5040 www.conwin.com specifications subject to change without notice. all dimensions in inches. ? copyright 2008 the connor-winfield corporation us headquarters: 630-851-4722 european headquarters: +353-61-472221 bulletin page revision date sm118 2of2 09 02 apr 2009 package characteristics environmental characteristics table 6 vibration: vibration per mil std 883e method 2007.3 test condition a shock: mechanical shock per mil std 883e method 2002.4 test condition b. soldering: smd product suitable for convection reflow soldering. peak temperature 260 c. maximum time above 220 c, 60 seconds. solderability solderability per mil std 883e method 2003 1 tape and reel specifications 120c 150c 180c 260c 0 220c 360 sec. max. 120 s max. 10 s 60 s max. time temperature 260c 90% 50% 10% lvcmos output waveform example: x123-133.33m = lvcmos clock, 0 to 70c, 50ppm, 3.3v @ 133.33 mhz ordering information package outline solder profile suggested pad layout pad connections - enable / disable function model matrix notes cw 0704 x123 133.33m .060 (1.50mm) maximum .275 (7.00mm) .197 (5.00mm) table 9 frequency tolerance 20ppm frequency tolerance 25ppm frequency tolerance 50ppm frequency tolerance 100ppm supply voltage temperature range x142 x112 x122 x132 2.5vdc 0 to 70c x242 x212 x222 x232 2.5vdc -40 to 85c x342 x312 x322 x332 2.5vdc 0 to 85c x442 x412 x422 x432 2.5vdc -20 to 70c x143 x113 x123 x133 3.3vdc 0 to 70c x243 x213 x223 x233 3.3vdc -40 to 85c x343 x313 x323 x333 3.3vdc 0 to 85c x443 x413 x423 x433 3.3vdc -20 to 70c table 7 pad connection 1 enable/disable 2 ground 3 output 4vcc table 8 enable / disable function (pad 1) output high or open enable low disable (high impedance) 1) maximum output frequency for the +/-20ppm and the +/-25ppm models is 200 mhz. 2) inclusive of calibration @ 25c, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 3) when the oscillator is disabled, the outputs are at high impedance. output is enabled with no connection on pad 1. 3 type: clock series 5x7mm supply voltage: 2 = 2.5vdc. 3 = 3.3vdc. temperature range: 1=0to 2 = -40 to 85 3=0to85 4 = -20 to 70 c c c 70 c frequency stability: 4 = +/-20 1 = +/- 2 = +/-50 3 = +/-100 ppm 25 ppm ppm ppm x 1 2 133.33m - output frequency: frequency format -xxx.xm min.* -xxx.xxxxxxm max.* *amount of numbers after the decimal point. m = mhz table 5 package ceramic surface mount package moisture sensitive level msl - 1 termination finish 0.7um gold over 2.5um nickel
|
