09-2010, rev. 0910 www.tycoelectronics.com ? 2010 tyco electronics ltd. datasheets and product specifcation ac - cording to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.tycoelectronics.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 1 potter & brumfeld general purpose relays pcb relays n up to 12a switching capacity n ul class f coil insulation system n 1 form a (no) and 1 form c (co) contact arrangement typical applications appliances, hvac, offce machines approvals ul e22575, tuv r50140298 technical data of approved types on request contact data contact arrangement 1 form a (no), 1 form c (co) rated voltage 240vac, 24vdc max. switching voltage 240vac, 24vdc rated current 10a contact material agcdo, ag min. recommended contact load 100ma at 5vdc frequency of operation 360 ops./h operate/release time max. 10/5ms electrical endurance 10a 240vac / 24vdc res, -30 to +85c, 600ops/hr 100x10 3 ops. contact ratings 10a mechanical endurance, dc coil 5x10 6 operations coil data coil voltage range 3 to 48vdc operative range, iec 61810 2 coil insulation system according ul class f coil data (continued) coil versions, dc coil coil rated operate release coil rated coil code voltage voltage voltage resistance power vdc vdc vdc ?10% mw 03 3 2.25 0.15 25 360 05 5 3.75 0.25 69.4 360 06 6 4.5 0.3 100 360 09 9 6.75 0.45 225 360 12 12 9.0 0.6 400 360 24 24 18.0 1.2 1600 360 48 48 36.0 2.4 4517 510 all fgures are given for coil without pre-energization, at ambient temperature +23c. insulation data initial dielectric strength between open contacts 750v rms between contact and coil 1500v rms clearance/creepage between contact and coil >1.6/3.2mm miniature pcb relay t7c 440 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) www.tycoelectronics.com technical support: refer to inside back cover. features ? up to 12 amp switching capacity. ? ul class f (155 c) coil insulation system. ? 1 form a and 1 form c contact arrangements. ? ideal for domestic appliances, hvac and security. ? resists high temperature and various chemical solutions. coil data @ 20 c voltage: 3 to 48vdc. nominal power: 360 milliwatts. 510 milliwatts for 48vdc coil. coil temperature rise: 35c max, at rated coil voltage. max. coil voltage: 130% of nominal. duty cycle: continuous. t7c series 5 - 12 amp miniature power pc board relay file e22575 file lr48471 initial insulation resistance between mutually insulated elements: 10 8 ohms min. @ 500vdc. mechanical data termination: printed circuit terminals. enclosure (94v-0 flammability ratings): t7cs: immersion cleanable with knock-off nib. t7cv: vented, flux-tight, plastic cover with knock-off nib. weight: 0.42 oz. (12g). coil data @ 20 c operate data @ 20 c operate time: 10 ms (excluding bounce). release time: 5 ms (excluding bounce). environmental data temperature range: storage: -40 c to +130 c. operating: -40 c to +85 c. vibration, mechanical: 10 to 55 hz., 1.5mm double amplitude operational: 10 to 55 hz., 1.5mm double amplitude. shock, mechanical: 100g min. operational: 10g min. operating humidity: 45 to 85% rh. initial dielectric strength between open contacts: 750vac 50/60 hz. (1 minute). between coil and contacts: 1,500vac 50/60 hz. (1 minute). rated coil coil resistance must operate must release voltage (ohms) +10% voltage voltage (vdc) (vdc) (vdc) 3 25 2.25 0.15 5 70 3.50 0.25 6 100 4.50 0.30 9 225 6.75 0.45 12 400 9.00 0.60 24 1,600 18.00 1.20 48 4,500 36.00 2.40 contact data @ 20 c arrangements: 1 form a (spst-no) and 1 form c (spdt). material: silver-cadmium oxide or silver. max. switching rate: 300 ops./min. (no load). 30 ops./min. (rated load). expected mechanical life: 10 million operations. expected electrical life: 100,000 operations. minimum load: 10ma @ 5vdc initial contact resistance: ag: 100 milliohms max. @ 100ma, 6vdc. agcdo: 100 milliohms max. @ 1a, 6vdc. silver cadmium oxide contact ratings @ 20 c with relay properly vented. remove vent nib after soldering and cleaning. contact ul/csa ratings type operations arrang. 1 & 5 1/3hp no @ 120vac motor 6,000** tv-2 no @ 120vac tungsten 25,000** 5.4lra/0.9fla no @ 240vac motor 30,000*** 10lra/1.5fla @ 120vac motor 30,000*** 12a no @ 120vac resistive/gp 100,000* 34.8lra/6fla no @ 120vac motor 100,000** 10a/5a @ 240vac resistive/gp 100,000** 10a/5a @ 28vdc resistive 100,000** 240va, 240vac pilot duty 100,000** 4lra/4fla no @ 120vac motor 100,000**** 4lra/2fla nc @ 120vac motor 100,000**** 6lra/6fla no @ 120vac motor 100,000*** 7a @ 277vac resistive/gp 100,000 10lra/2.5fla no @ 277vac motor 100,000 consult factory for other ratings. *denotes test at 60 c ambient temperature. **denotes test at 70 c ambient temperature. ***denotes test at 85 c ambient temperature. ****denotes test at 105 c ambient temperature. silver contact ratings @ 20 c with relay properly vented. remove vent nib after soldering and cleaning. contact ratings type operations arrang. 1 & 5 5a @ 120vac resistive 6,000 5a @ 28vdc resistive 6,000 12 10 8 6 4 2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 coil power (w) time (msec) release time operate time time (msec) -30 -10 ambient temp. ( c) 20 % of supplying voltage to coil 10 30 50 70 90 110 40 60 80 100 120 140 160 0 180 130 150 operating voltage range pick-up voltage hot coil 10a applied maximum allowable coil voltage 100 2 contact current (a) operation (x 10 4 ) 10 1 4 6 8 10 12 0 24vdc resistive 240vac resistiv e cool coil figure 1 - coil temperature rise operate time life expectancy note: graphical data should not be used as a substitute for specific application verification. to be used for estimates only. graphi cal data applicable to model with silver cadmium oxide contacts. users should thoroughly review the technical data before selecting a product part number. it is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. coil operative range operate time 440 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) www.tycoelectronics.com technical support: refer to inside back cover. features ? up to 12 amp switching capacity. ? ul class f (155 c) coil insulation system. ? 1 form a and 1 form c contact arrangements. ? ideal for domestic appliances, hvac and security. ? resists high temperature and various chemical solutions. coil data @ 20 c voltage: 3 to 48vdc. nominal power: 360 milliwatts. 510 milliwatts for 48vdc coil. coil temperature rise: 35c max, at rated coil voltage. max. coil voltage: 130% of nominal. duty cycle: continuous. t7c series 5 - 12 amp miniature power pc board relay file e22575 file lr48471 initial insulation resistance between mutually insulated elements: 10 8 ohms min. @ 500vdc. mechanical data termination: printed circuit terminals. enclosure (94v-0 flammability ratings): t7cs: immersion cleanable with knock-off nib. t7cv: vented, flux-tight, plastic cover with knock-off nib. weight: 0.42 oz. (12g). coil data @ 20 c operate data @ 20 c operate time: 10 ms (excluding bounce). release time: 5 ms (excluding bounce). environmental data temperature range: storage: -40 c to +130 c. operating: -40 c to +85 c. vibration, mechanical: 10 to 55 hz., 1.5mm double amplitude operational: 10 to 55 hz., 1.5mm double amplitude. shock, mechanical: 100g min. operational: 10g min. operating humidity: 45 to 85% rh. initial dielectric strength between open contacts: 750vac 50/60 hz. (1 minute). between coil and contacts: 1,500vac 50/60 hz. (1 minute). rated coil coil resistance must operate must release voltage (ohms) +10% voltage voltage (vdc) (vdc) (vdc) 3 25 2.25 0.15 5 70 3.50 0.25 6 100 4.50 0.30 9 225 6.75 0.45 12 400 9.00 0.60 24 1,600 18.00 1.20 48 4,500 36.00 2.40 contact data @ 20 c arrangements: 1 form a (spst-no) and 1 form c (spdt). material: silver-cadmium oxide or silver. max. switching rate: 300 ops./min. (no load). 30 ops./min. (rated load). expected mechanical life: 10 million operations. expected electrical life: 100,000 operations. minimum load: 10ma @ 5vdc initial contact resistance: ag: 100 milliohms max. @ 100ma, 6vdc. agcdo: 100 milliohms max. @ 1a, 6vdc. silver cadmium oxide contact ratings @ 20 c with relay properly vented. remove vent nib after soldering and cleaning. contact ul/csa ratings type operations arrang. 1 & 5 1/3hp no @ 120vac motor 6,000** tv-2 no @ 120vac tungsten 25,000** 5.4lra/0.9fla no @ 240vac motor 30,000*** 10lra/1.5fla @ 120vac motor 30,000*** 12a no @ 120vac resistive/gp 100,000* 34.8lra/6fla no @ 120vac motor 100,000** 10a/5a @ 240vac resistive/gp 100,000** 10a/5a @ 28vdc resistive 100,000** 240va, 240vac pilot duty 100,000** 4lra/4fla no @ 120vac motor 100,000**** 4lra/2fla nc @ 120vac motor 100,000**** 6lra/6fla no @ 120vac motor 100,000*** 7a @ 277vac resistive/gp 100,000 10lra/2.5fla no @ 277vac motor 100,000 consult factory for other ratings. *denotes test at 60 c ambient temperature. **denotes test at 70 c ambient temperature. ***denotes test at 85 c ambient temperature. ****denotes test at 105 c ambient temperature. silver contact ratings @ 20 c with relay properly vented. remove vent nib after soldering and cleaning. contact ratings type operations arrang. 1 & 5 5a @ 120vac resistive 6,000 5a @ 28vdc resistive 6,000 12 10 8 6 4 2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 coil power (w) time (msec) release time operate time time (msec) -30 -10 ambient temp. ( c) 20 % of supplying voltage to coil 10 30 50 70 90 110 40 60 80 100 120 140 160 0 180 130 150 operating voltage range pick-up voltage hot coil 10a applied maximum allowable coil voltage 100 2 contact current (a) operation (x 10 4 ) 10 1 4 6 8 10 12 0 24vdc resistive 240vac resistiv e cool coil figure 1 - coil temperature rise operate time life expectancy note: graphical data should not be used as a substitute for specific application verification. to be used for estimates only. graphi cal data applicable to model with silver cadmium oxide contacts. users should thoroughly review the technical data before selecting a product part number. it is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. 440 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) www.tycoelectronics.com technical support: refer to inside back cover. features ? up to 12 amp switching capacity. ? ul class f (155 c) coil insulation system. ? 1 form a and 1 form c contact arrangements. ? ideal for domestic appliances, hvac and security. ? resists high temperature and various chemical solutions. coil data @ 20 c voltage: 3 to 48vdc. nominal power: 360 milliwatts. 510 milliwatts for 48vdc coil. coil temperature rise: 35c max, at rated coil voltage. max. coil voltage: 130% of nominal. duty cycle: continuous. t7c series 5 - 12 amp miniature power pc board relay file e22575 file lr48471 initial insulation resistance between mutually insulated elements: 10 8 ohms min. @ 500vdc. mechanical data termination: printed circuit terminals. enclosure (94v-0 flammability ratings): t7cs: immersion cleanable with knock-off nib. t7cv: vented, flux-tight, plastic cover with knock-off nib. weight: 0.42 oz. (12g). coil data @ 20 c operate data @ 20 c operate time: 10 ms (excluding bounce). release time: 5 ms (excluding bounce). environmental data temperature range: storage: -40 c to +130 c. operating: -40 c to +85 c. vibration, mechanical: 10 to 55 hz., 1.5mm double amplitude operational: 10 to 55 hz., 1.5mm double amplitude. shock, mechanical: 100g min. operational: 10g min. operating humidity: 45 to 85% rh. initial dielectric strength between open contacts: 750vac 50/60 hz. (1 minute). between coil and contacts: 1,500vac 50/60 hz. (1 minute). rated coil coil resistance must operate must release voltage (ohms) +10% voltage voltage (vdc) (vdc) (vdc) 3 25 2.25 0.15 5 70 3.50 0.25 6 100 4.50 0.30 9 225 6.75 0.45 12 400 9.00 0.60 24 1,600 18.00 1.20 48 4,500 36.00 2.40 contact data @ 20 c arrangements: 1 form a (spst-no) and 1 form c (spdt). material: silver-cadmium oxide or silver. max. switching rate: 300 ops./min. (no load). 30 ops./min. (rated load). expected mechanical life: 10 million operations. expected electrical life: 100,000 operations. minimum load: 10ma @ 5vdc initial contact resistance: ag: 100 milliohms max. @ 100ma, 6vdc. agcdo: 100 milliohms max. @ 1a, 6vdc. silver cadmium oxide contact ratings @ 20 c with relay properly vented. remove vent nib after soldering and cleaning. contact ul/csa ratings type operations arrang. 1 & 5 1/3hp no @ 120vac motor 6,000** tv-2 no @ 120vac tungsten 25,000** 5.4lra/0.9fla no @ 240vac motor 30,000*** 10lra/1.5fla @ 120vac motor 30,000*** 12a no @ 120vac resistive/gp 100,000* 34.8lra/6fla no @ 120vac motor 100,000** 10a/5a @ 240vac resistive/gp 100,000** 10a/5a @ 28vdc resistive 100,000** 240va, 240vac pilot duty 100,000** 4lra/4fla no @ 120vac motor 100,000**** 4lra/2fla nc @ 120vac motor 100,000**** 6lra/6fla no @ 120vac motor 100,000*** 7a @ 277vac resistive/gp 100,000 10lra/2.5fla no @ 277vac motor 100,000 consult factory for other ratings. *denotes test at 60 c ambient temperature. **denotes test at 70 c ambient temperature. ***denotes test at 85 c ambient temperature. ****denotes test at 105 c ambient temperature. silver contact ratings @ 20 c with relay properly vented. remove vent nib after soldering and cleaning. contact ratings type operations arrang. 1 & 5 5a @ 120vac resistive 6,000 5a @ 28vdc resistive 6,000 12 10 8 6 4 2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 coil power (w) time (msec) release time operate time time (msec) -30 -10 ambient temp. ( c) 20 % of supplying voltage to coil 10 30 50 70 90 110 40 60 80 100 120 140 160 0 180 130 150 operating voltage range pick-up voltage hot coil 10a applied maximum allowable coil voltage 100 2 contact current (a) operation (x 10 4 ) 10 1 4 6 8 10 12 0 24vdc resistive 240vac resistiv e cool coil figure 1 - coil temperature rise operate time life expectancy note: graphical data should not be used as a substitute for specific application verification. to be used for estimates only. graphi cal data applicable to model with silver cadmium oxide contacts. users should thoroughly review the technical data before selecting a product part number. it is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. electrical endurance t u
09-2010, rev. 0910 www.tycoelectronics.com ? 2010 tyco electronics ltd. datasheets and product specifcation ac - cording to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.tycoelectronics.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 2 potter & brumfeld general purpose relays pcb relays miniature pcb relay t7c (continued) other data material compliance: eu rohs/elv, china rohs, reach, halogen content refer to the product compliance support center at www.tycoelectronics.com/customersupport/rohssupportcenter ambient temperature -30c to +85c category of environmental protection iec 61810 rtii - fux proof rtiii - wash tight shock resistance (functional) 10g shock resistance (destructive) 100g weight 12g resistance to soldering heat tht iec 60068-2-20 rtii: 270c/10s rtiii: 260c/5s packaging unit tube/40 pcs., carton box/1000 pcs. accessories product code description 27e1064 socket, rated 10a at 300vac. ul recognized for us and canada. designed to ft same suggested board layout as relay. 20c430 spring is designed to secure t7c relay in 27e1064 socket. 441 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) t7cv5d-05 t7cv5d-06 our authorized distributors are more likely to maintain the following items in stock for immediate delivery. t7cv5d-12 t7cv5d-24 t7cs5d-05 t7cs5d-06 t7cs5d-12 t7cs5d-24 1 form a suggested pc board layouts (bottom views) 1 form a wiring diagrams (bottom views) 1 form c 1 form c outline dimensions .795 .02 (20.2 .5) .65 (16.50) .795 .02 (20.2 .5) .197 max. (5.0) movable contact terminal: .012 x.039 (0.3 x 1.0) stationary contact terminals: .012 x .039 (0.3 x 1.0) coil terminals: .022 x .022 (.56 x .56) 2-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) 3-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) ordering information typical part number b t7c v 5 d -24 1. basic series: t7c = miniature power relay. 2. enclosure: v = vented (flux-tight)* s = immersion cleanable case with knock-off nib. 3. contact arrangement: 1 = 1 form a (spst-no) 5 = 1 form c (spdt) 4. coil input: d = dc voltage 5. contact material: leave blank = silver cadmium oxide (12a max. rating) 2 = silver (5a max. rating) 6. coil voltage: 03 = 3vdc 05 = 5vdc 06 = 6vdc 09 = 9vdc 12 = 12vdc 18 = 18vdc 24 = 24vdc 48 = 48vdc * not suitable for immersion cleaning processes. socket hold-down spring .167 max. (4.25) .270 max. (6.85) .916 max. (23.35) .660 max. (16.75) .016 typ. (.40) 27e1064 socket is rated 10a @ 300vac. ul recognized for us and canada. designed to fit same suggested board layout as relay. 20c430 spring is designed to secure t7c relay in 27e1064 socket. terminal assignment bottom view on solder pins 441 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) t7cv5d-05 t7cv5d-06 our authorized distributors are more likely to maintain the following items in stock for immediate delivery. t7cv5d-12 t7cv5d-24 t7cs5d-05 t7cs5d-06 t7cs5d-12 t7cs5d-24 1 form a suggested pc board layouts (bottom views) 1 form a wiring diagrams (bottom views) 1 form c 1 form c outline dimensions .795 .02 (20.2 .5) .65 (16.50) .795 .02 (20.2 .5) .197 max. (5.0) movable contact terminal: .012 x.039 (0.3 x 1.0) stationary contact terminals: .012 x .039 (0.3 x 1.0) coil terminals: .022 x .022 (.56 x .56) 2-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) 3-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) ordering information typical part number b t7c v 5 d -24 1. basic series: t7c = miniature power relay. 2. enclosure: v = vented (flux-tight)* s = immersion cleanable case with knock-off nib. 3. contact arrangement: 1 = 1 form a (spst-no) 5 = 1 form c (spdt) 4. coil input: d = dc voltage 5. contact material: leave blank = silver cadmium oxide (12a max. rating) 2 = silver (5a max. rating) 6. coil voltage: 03 = 3vdc 05 = 5vdc 06 = 6vdc 09 = 9vdc 12 = 12vdc 18 = 18vdc 24 = 24vdc 48 = 48vdc * not suitable for immersion cleaning processes. socket hold-down spring .167 max. (4.25) .270 max. (6.85) .916 max. (23.35) .660 max. (16.75) .016 typ. (.40) 27e1064 socket is rated 10a @ 300vac. ul recognized for us and canada. designed to fit same suggested board layout as relay. 20c430 spring is designed to secure t7c relay in 27e1064 socket. dimensions pcb layout bottom view on solder pins 441 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) t7cv5d-05 t7cv5d-06 our authorized distributors are more likely to maintain the following items in stock for immediate delivery. t7cv5d-12 t7cv5d-24 t7cs5d-05 t7cs5d-06 t7cs5d-12 t7cs5d-24 1 form a suggested pc board layouts (bottom views) 1 form a wiring diagrams (bottom views) 1 form c 1 form c outline dimensions .795 .02 (20.2 .5) .65 (16.50) .795 .02 (20.2 .5) .197 max. (5.0) movable contact terminal: .012 x.039 (0.3 x 1.0) stationary contact terminals: .012 x .039 (0.3 x 1.0) coil terminals: .022 x .022 (.56 x .56) 2-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) 3-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) ordering information typical part number b t7c v 5 d -24 1. basic series: t7c = miniature power relay. 2. enclosure: v = vented (flux-tight)* s = immersion cleanable case with knock-off nib. 3. contact arrangement: 1 = 1 form a (spst-no) 5 = 1 form c (spdt) 4. coil input: d = dc voltage 5. contact material: leave blank = silver cadmium oxide (12a max. rating) 2 = silver (5a max. rating) 6. coil voltage: 03 = 3vdc 05 = 5vdc 06 = 6vdc 09 = 9vdc 12 = 12vdc 18 = 18vdc 24 = 24vdc 48 = 48vdc * not suitable for immersion cleaning processes. socket hold-down spring .167 max. (4.25) .270 max. (6.85) .916 max. (23.35) .660 max. (16.75) .016 typ. (.40) 27e1064 socket is rated 10a @ 300vac. ul recognized for us and canada. designed to fit same suggested board layout as relay. 20c430 spring is designed to secure t7c relay in 27e1064 socket. 1 form c (co) 1 form a (no) 1 form c (co) 1 form a (no) 441 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) t7cv5d-05 t7cv5d-06 our authorized distributors are more likely to maintain the following items in stock for immediate delivery. t7cv5d-12 t7cv5d-24 t7cs5d-05 t7cs5d-06 t7cs5d-12 t7cs5d-24 1 form a suggested pc board layouts (bottom views) 1 form a wiring diagrams (bottom views) 1 form c 1 form c outline dimensions .795 .02 (20.2 .5) .65 (16.50) .795 .02 (20.2 .5) .197 max. (5.0) movable contact terminal: .012 x.039 (0.3 x 1.0) stationary contact terminals: .012 x .039 (0.3 x 1.0) coil terminals: .022 x .022 (.56 x .56) 2-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) 3-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) ordering information typical part number b t7c v 5 d -24 1. basic series: t7c = miniature power relay. 2. enclosure: v = vented (flux-tight)* s = immersion cleanable case with knock-off nib. 3. contact arrangement: 1 = 1 form a (spst-no) 5 = 1 form c (spdt) 4. coil input: d = dc voltage 5. contact material: leave blank = silver cadmium oxide (12a max. rating) 2 = silver (5a max. rating) 6. coil voltage: 03 = 3vdc 05 = 5vdc 06 = 6vdc 09 = 9vdc 12 = 12vdc 18 = 18vdc 24 = 24vdc 48 = 48vdc * not suitable for immersion cleaning processes. socket hold-down spring .167 max. (4.25) .270 max. (6.85) .916 max. (23.35) .660 max. (16.75) .016 typ. (.40) 27e1064 socket is rated 10a @ 300vac. ul recognized for us and canada. designed to fit same suggested board layout as relay. 20c430 spring is designed to secure t7c relay in 27e1064 socket. 441 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. p&b catalog 1308242 issued 3-03 (pdf rev. 3-04) t7cv5d-05 t7cv5d-06 our authorized distributors are more likely to maintain the following items in stock for immediate delivery. t7cv5d-12 t7cv5d-24 t7cs5d-05 t7cs5d-06 t7cs5d-12 t7cs5d-24 1 form a suggested pc board layouts (bottom views) 1 form a wiring diagrams (bottom views) 1 form c 1 form c outline dimensions .795 .02 (20.2 .5) .65 (16.50) .795 .02 (20.2 .5) .197 max. (5.0) movable contact terminal: .012 x.039 (0.3 x 1.0) stationary contact terminals: .012 x .039 (0.3 x 1.0) coil terminals: .022 x .022 (.56 x .56) 2-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) 3-.051 ? (1.3) 2-.043 ? (2-1.1) .236 .008 (6 .2) .48 .008 (12.2 .2) .079 .008 (2 .2) .236 .008 (6 .2) ordering information typical part number b t7c v 5 d -24 1. basic series: t7c = miniature power relay. 2. enclosure: v = vented (flux-tight)* s = immersion cleanable case with knock-off nib. 3. contact arrangement: 1 = 1 form a (spst-no) 5 = 1 form c (spdt) 4. coil input: d = dc voltage 5. contact material: leave blank = silver cadmium oxide (12a max. rating) 2 = silver (5a max. rating) 6. coil voltage: 03 = 3vdc 05 = 5vdc 06 = 6vdc 09 = 9vdc 12 = 12vdc 18 = 18vdc 24 = 24vdc 48 = 48vdc * not suitable for immersion cleaning processes. socket hold-down spring .167 max. (4.25) .270 max. (6.85) .916 max. (23.35) .660 max. (16.75) .016 typ. (.40) 27e1064 socket is rated 10a @ 300vac. ul recognized for us and canada. designed to fit same suggested board layout as relay. 20c430 spring is designed to secure t7c relay in 27e1064 socket. movable contact terminal: .012x.039 (0.3x1.0) stationary contact terminals: .012x.039 (0.3x1.0) coil terminals: .022x.022 (.56x.56)
09-2010, rev. 0910 www.tycoelectronics.com ? 2010 tyco electronics ltd. datasheets and product specifcation ac - cording to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.tycoelectronics.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 3 potter & brumfeld general purpose relays pcb relays miniature pcb relay t7c (continued) product code enclosure cont.arrangement coil input contact material coil voltage part number t7cs1d-05 wash tight 1 form a (no) dc coil agcdo 5vdc 1393190-7 t7cs1d-12 12vdc 1-1393190-0 t7cs1d-24 24vdc 1-1393190-2 t7cs1d2-05 ag 5vdc 1-1393190-4 t7cs1d2-09 9vdc 1-1440006-1 t7cs1d2-12 12vdc 1-1393190-5 t7cs1d2-24 24vdc 1-1393190-6 t7cs5d-05 1 form c (co) agcdo 5vdc 1-1393190-8 t7cs5d-09 9vdc 2-1393190-0 t7cs5d-12 12vdc 2-1393190-2 t7cs5d-24 24vdc 2-1393190-8 t7cs5d-48 48vdc 3-1393190-1 t7cv1d-24 flux proof 1 form a (no) 24vdc 4-1393190-3 t7cv5d-05 1 form c (co) 5vdc 4-1393190-6 t7cv5d-06 6vdc 4-1393190-7 t7cv5d-12 12vdc 5-1393190-3 t7cv5d-24 24vdc 6-1393190-0 product code structure typical product code t7c v 5 d 2 -24 type t7c miniature pcb relay t7c enclosure v flux proof s wash tight, immersion cleanable case with knock-off nib contact arrangement 1 1 form a (no) contact 5 1 form c (co) contact coil input d dc coil contact material blank agcdo 2 ag coil voltage coil code: please refer to coil versions table (e.g. 05=5vdc) other types on request
|
