specifications subject to change without notice t apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com t1 picod series subminiature pushwheel switches features picod specifications panel mounting hole: height .590"(15mm) width .300"(7.62mm) installed depth with p.c. board: short .945"(24mm) long 1.358"(34.5mm) insertion from front yes insertion from rear no codes code positions marking 111 decimal 10 0-9 see truth tables 131 bcd 10 0-9 see truth tables 137 bcd comp 10 0-9 see truth tables 301 hexadecimal 16 0-9, a-f(0-15) see truth tables 307 hexadec.comp. 16 0-9, a-f(0-15) see truth tables 400 change-over 10 +,-,+,-,etc.. see truth tables electrical data operating voltage: 40 v max. contact load, static: 0.5 a max. contact load, dynamic: 100 ma max. contact resistance (type ak): less than 100 mohm technical data operating temperature range: -20c to 60c electric life, min. switching cycles 100,000 actuation force, approx (oz.): 11 weight, approx. (grams): 2 character height: 10 digit .122" (3.1mm) 16 digit .094" (2.4mm) audible click yes vibration din iec 68, parts 2-6 yes shock din 40046, part 7 yes materials body: ppo pc board: fr 4 din 40802 iec 249-2, contact surface gold over nickel on copper sliding contact: gold over nickel on copper alloy standard colors housing,drum,printing 2 = black 3 = white 2,2,3 other special features are available upon request including: factory set stops red digits decimal point special codes or printing gray housing see sockets at end of pushwheel section. small panel mounting pushwheel switches. models available with esd protection - consult factory. snap action detent with audible click. black housing and drum with white printing. gangable front mounting models with spacers and side covers. gold wiping action contacts. p.c. board options include solderable lands.
specifications subject to change without notice t apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com t2 picod series subminiature pushwheel switches code 137 bcd comp. c1 2 4 8 0 1 2 3 4 5 6 7 8 9 code 400 change-over ca+a- + - + - + - + - + - truth tables n = number of switches pin connections mechanical outline with panel cut-out & mounting 131 1248c 137 28c14 301 c1 2 4 8 307 c1 2 4 8 400 -+c 301 c1 2 4 8 131 1248c 137 28c14 the switching mode is shorting - i.e. - even during actuation, at least one output is connected to input c. code 111 decimal c0123456789 0 1 2 3 4 5 6 7 8 9 code 301 hexadecimal 1248c 0 1 2 3 4 5 6 7 8 9 a b c d e f code 307 hexadec. comp. c1 2 4 8 0 1 2 3 4 5 6 7 8 9 a b c d e f code 131 bcd c1 2 4 8 0 1 2 3 4 5 6 7 8 9 98765 111 01234c 307 code available with ak p.c. option only. 111 code available with al p.c. option only.
specifications subject to change without notice t apem , 63 neck road, haverhill, ma usa 01835-0788 toll free: (877) 246-7890 fax: (978) 372-3534 e-mail: info@apem.com t3 picod series subminiature pushwheel switches printed circuit options p.c. boards have .039" (1mm) holes and are suitable for soldering or socket connection (with the exception of led illumination option). ak short p.c. board al long p.c. board for decimal alu long p.c. board version (solder terminal) 'build your own switch' order format ordering information: below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from available options shown and filling in the boxes. consult factory for fully assembled switches. 111 decimal 131 bcd 137 bcd comp. 301 hexadecimal 307 hexadecimal comp. 400 change-over ak short al long al u long (rt. angle) al d long (interrupted) black housing & drum, white lettering. series model code p.c. board terminations standard colors example of complete model no.: PICOD131AL2 accessories order separately picodp2 pair of side covers picoda2 spacer ald long (interrupted) p.c. board al long p.c. board ls p.c. board w/solder pins pi cod picodpk2 pair of side covers picodah2 spacer picodl2 dummy housing picord switches for rear mounting available on request. 2 note: for code 111, only model picod111al2 is available. (none) ls with p.c. solder pins picodl2 dummy switches these are empty plastic housings with the same dimensions as picod model (see outline). use to fill hole where switch is not needed. dimensions are the same as al . space allows customer to add resistors, diodes, ect.
|
