spec no: dsad2296 rev no: v.5 date: dec/02/2005 page: 1 of 4 approved: j. lu checked: joe lee drawn: y.w.wang erp:1 301000746 package dimensions & internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. 20.32mm (0.8inch) single digit numeric display description the green source color devices are made with gallium phosphide green light emitting diode . p / n : sc08 - 11gwa green features 0.8 inch digit height. low current operation. excellent character appearance. easy mounting on p.c. boards or sockets. i.c. compatible. categorized for luminous intensity. mechanically rugged. standard : gray face, white segment. rohs compliant.
spec no: dsad2296 rev no: v.5 date: dec/02/2005 page: 2 of 4 approved: j. lu checked: joe lee drawn: y.w.wang erp:1 301000746 selection guid e electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. part no. dice lens type iv (ucd) @ 10ma min. typ. sc08 - 11gwa green(gap) white diffused 1900 10500 common cathode,rt. hand decimal. description parameter green units power dissipation 105 mw dc forward current 25 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature - 40c to +85c lead solder temperature [2] 260c for 5 seconds symbol parameter device typ. max. test conditions units peak peak wavelength green 565 nm i f =20ma d dominant wavelength green 568 nm i f =20ma ? 1/2 spectral line half - width green 30 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.2 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v
spec no: dsad2296 rev no: v.5 date: dec/02/2005 page: 3 of 4 approved: j. lu checked: joe lee drawn: y.w.wang erp:1 301000746 green sc08 - 11gwa
spec no: dsad2296 rev no: v.5 date: dec/02/2005 page: 4 of 4 approved: j. lu checked: joe lee drawn: y.w.wang erp:1 301000746 packing & label specifications sc08 - 11gwa remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
