|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
gs71108atp/u 128k x 8 1mb asynchronous sram 7, 8, 10, 12 ns 3.3 v v dd center v dd and v ss tsop, fp-bga commercial temp industrial temp rev: 1.10 3/2009 1/13 ? 2001, gsi technology specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. features ? fast access time: 7, 8, 10, 12 ns ? cmos low power operation: 140/120/95/80 ma at minimum cycle time ? single 3.3 v power supply ? all inputs and outputs are ttl-compatible ? fully static operation ? industrial temperature option: ? 40 to 85c ? package line up tp: 400 mil, 32-pin tsop type ii package gp: rohs-compliant 400 mil, 32-pin tsop type ii package u: 6 mm x 8 mm fine pitch ball grid array package gu: rohs-compliant 6 mm x 8 mm fine pitch ball grid array package description the gs71108a is a high speed cmos static ram organized as 131,072 words by 8 bits. static design eliminates the need for external clocks or timing strobes. the gs 71108 operates on a single 3.3 v power supply and all inputs and outputs are ttl-compatible. the gs71108a is available in the 6 mm x 8 mm fine pitch bga package and 400 mil tsop type-ii packages. tsop-ii 128k x 8- pin configuration package tp fine pitch bga 128k x 8-bump configuration package u 6 mm x 8 mm, 0.75 mm bump pitch top view pin descriptions symbol description a 0 ? a 16 address input dq 1 ? dq 8 data input/output ce chip enable input we write enable input oe output enable input v dd +3.3 v power supply v ss ground nc no connect 1 2 3 4 5 6 a nc oe a 2 a 6 a 7 nc b dq 1 nc a 1 a 5 ce dq 8 c dq 2 nc a 0 a 4 nc dq 7 d v ss nc nc a 3 nc v dd e v dd nc nc nc nc v ss f dq 3 nc a 14 a 11 dq 5 dq 6 g dq 4 nc a 15 a 12 we a 8 h nc a 10 a 16 a 13 a 9 nc 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 a 3 a 2 a 1 a 0 ce dq 1 dq 2 v dd v ss dq 3 dq 4 we a 16 a 15 a 14 a 13 a 4 a5 a6 a 7 oe dq 8 dq 7 v ss v dd dq6 dq 5 a 8 a 9 a 10 a 11 a 12 400 mil tsop ii
gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 2/13 ? 2001, gsi technology block diagram note: x: ?h? or ?l? truth table ce oe we dq 1 to dq 8 v dd current h x x not selected isb 1 , isb 2 l l h read i dd l x l write l h h high z memory array row decoder column decoder address input buffer control i/o buffer a 0 ce we oe dq 1 a 16 dq 8 gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 3/13 ? 2001, gsi technology note: permanent device damage may occur if absolute maximum ratings ar e exceeded. functional operation shall be restricted to recomme nded operating conditions. exposure to higher than recommended voltages for extended peri ods of time could affect device reliability . notes: 1. input overshoot voltage should be less than v dd +2 v and not exceed 20 ns. 2. input undershoot voltage should be greater than ? 2 v and not exceed 20 ns. absolute maximum ratings parameter symbol rating unit supply voltage v dd ? 0.5 to +4.6 v input voltage v in ? 0.5 to v dd +0.5 ( ?? 4.6 v max.) v output voltage v out ? 0.5 to v dd +0.5 ( ?? 4.6 v max.) v allowable power dissipation pd 0.7 w storage temperature t stg ? 55 to 150 o c recommended oper ating conditions parameter symbol min typ max unit supply voltage for -7/-8/-10/-12 v dd 3.0 3.3 3.6 v input high voltage v ih 2.0 ? v dd +0.3 v input low voltage v il ? 0.3 ? 0.8 v ambient temperature, commercial range t ac 0 ? 70 o c ambient temperature, industrial range t a i ? 40 ? 85 o c gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 4/13 ? 2001, gsi technology notes: 1. tested at t a = 25c, f = 1 mhz 2. these parameters are sampled and are not 100% tested. capacitance parameter symbol test condition max unit input capacitance c in v in = 0 v 5 pf output capacitance c out v out = 0 v 7 pf dc i/o pin characteristics parameter symbol test conditions min max input leakage current i il v in = 0 to v dd ? 1 ua 1 ua output leakage current i lo output high z v out = 0 to v dd ? 1 ua 1 ua output high voltage v oh i oh = ? 4 ma 2.4 ? output low voltage v ol i lo = +4 ma ? 0.4 v power supply currents parameter symbol test conditions 0 to 70c ?40 to 85c 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns operating supply current i dd ce ?? v il all other inputs ?? v ih or ?? v il min. cycle time i out = 0 ma 140 ma 120 ma 95 ma 80 ma 145 ma 125 ma 100 ma 85 ma standby current i sb1 ce ?? v ih all other inputs ? v ih or ? v il min. cycle time 25 ma 20 ma 20 ma 15 ma 30 ma 25 ma 25 ma 20 ma standby current i sb2 ce ?? v dd ? 0.2 v all other inputs ? v dd ? 0.2 v or ?? 0.2 v 2 ma 5 ma gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 5/13 ? 2001, gsi technology ac test conditions ac characteristics * these parameters are sampled and are not 100% tested read cycle parameter symbol -7 -8 -10 -12 unit min max min max min max min max read cycle time t rc 7 ? 8 ? 10 ? 12 ? ns address access time t aa ? 7 ? 8 ? 10 ? 12 ns chip enable access time ( ce ) t ac ? 7 ? 8 ? 10 ? 12 ns output enable to output valid ( oe ) t oe ? 3 ? 3.5 ? 4 ? 5 ns output hold from address change t oh 3 ? 3 ? 3 ? 3 ? ns chip enable to output in low z ( ce ) t lz * 3 ? 3 ? 3 ? 3 ? ns output enable to output in low z ( oe ) t olz * 0 ? 0 ? 0 ? 0 ? ns chip disable to output in high z ( ce ) t hz * ? 3.5 ? 4 ? 5 ? 6 ns output disable to output in high z ( oe ) t ohz * ? 3 ? 3.5 ? 4 ? 5 ns dq vt = 1.4 v 50 ? 30pf 1 dq 3.3 v output load 1 output load 2 589 ? 434 ? 5pf 1 notes: 1. include scope and jig capacitance. 2. test conditions as specified with output loading as shown in fig. 1 unless otherwise noted. 3. output load 2 for t lz , t hz , t olz and t ohz parameter conditions input high level v ih = 2.4 v input low level v il = 0.4 v input rise time tr = 1 v/ns input fall time tf = 1 v/ns input reference level 1.4 v output reference level 1.4 v output load fig. 1& 2 gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 6/13 ? 2001, gsi technology read cycle 1: ce = oe = v il , we = v ih read cycle 2: we = v ih t aa t oh t rc address data out previous data data valid t aa t rc address t ac t lz t oe t olz ce oe data out t hz t ohz d ata valid high impedance gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 7/13 ? 2001, gsi technology * these parameters are sampled and are not 100% tested write cycle 1: we control write cycle parameter symbol -7 -8 -10 -12 unit min max min max min max min max write cycle time twc 7 ? 8 ? 10 ? 12 ? ns address valid to end of write taw 5 ? 5.5 ? 7 ? 8 ? ns chip enable to end of write tcw 5 ? 5.5 ? 7 ? 8 ? ns data set up time tdw 3 ? 4 ? 5 ? 6 ? ns data hold time tdh 0 ? 0 ? 0 ? 0 ? ns write pulse width twp 5 ? 5.5 ? 7 ? 8 ? ns address set up time tas 0 ? 0 ? 0 ? 0 ? ns write recovery time ( we ) twr 0 ? 0 ? 0 ? 0 ? ns write recovery time ( ce ) twr1 0 ? 0 ? 0 ? 0 ? ns output low z from end of write twlz * 3 ? 3 ? 3 ? 3 ? ns write to output in high z twhz * ? 3 ? 3.5 ? 4 ? 5 ns t wc address ce we data in oe data out t aw t cw t as t wp t wr t dw t dh t wlz t whz d ata valid h igh impedance gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 8/13 ? 2001, gsi technology write cycle 2: ce control t wc address ce we data in oe data out t aw t wp t as t cw t wr1 t dw t dh d ata valid h igh impedance gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 9/13 ? 2001, gsi technology 32-pin tsop-ii, 400mil d 1 32 e b q a a1 a2 y c detail a e1 e l a zd l1 notes: 1. dimension d includes mold flas h, protrusions or gate burrs. 2. dimension e does not include interlead flash 3. controlling dimension: mm symbol dimension in inch dimension in mm min nom max min nom max a 0.039 ? 0.05 ? ? 1.27 a1 0.002 ? 0.006 0.01 ? 0.15 a2 0.037 0.040 0.045 0.90 1.02 1.14 b 0.012 0.016 0.018 0.30 0.40 0.45 c 0.0047 0.0051 0.0062 0.12 0.13 0.16 d 0.820 0.825 0.830 20.82 20.95 21.08 zd ? 0.037 ? ? 0.95 ? e 0.455 0.463 0.471 11.56 11.76 11.96 e1 0.395 0.400 0.405 10.03 10.16 10.29 e ? 0.05 ? ? 1.27 ? l 0.017 0.020 0.023 0.40 0.50 0.60 l1 0.024 0.031 0.039 0.60 0.80 1.00 y 0.00 ? 0.003 0.00 ? 0.76 q 0 o ? 5 o 0 o ? 5 o gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 10/13 ? 2001, gsi technology 6 mm x 8 mm fine pitch bga c 5.25 0.75(typ). 3.75 pin a1 index 654321 a b d e f g h 0.22 0.05 1.20(max) 0.36(typ) ball dia. 0.35 pitch 0.75 d 0.10 pin a1 index bottom view top view 6.00 0.10 8.00 0.10 units: mm gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 11/13 ? 2001, gsi technology ordering information part number * package access time temp. range gs71108atp-7 400 mil tsop-ii 7 ns commercial gs71108atp-8 400 mil tsop-ii 8 ns commercial gs71108atp-10 400 mil tsop-ii 10 ns commercial gs71108atp-12 400 mil tsop-ii 12 ns commercial gs71108atp-7i 400 mil tsop-ii 7 ns industrial gs71108atp-8i 400 mil tsop-ii 8 ns industrial gs71108atp-10i 400 mil tsop-ii 10 ns industrial gs71108atp-12i 400 mil tsop-ii 12 ns industrial gs71108agp-7 rohs-compliant 400 mil tsop-ii 7 ns commercial gs71108agp-8 rohs-compliant 400 mil tsop-ii 8 ns commercial gs71108agp-10 rohs-compliant 400 mil tsop-ii 10 ns commercial gs71108agp-12 rohs-compliant 400 mil tsop-ii 12 ns commercial gs71108agp-7i rohs-compliant 400 mil tsop-ii 7 ns industrial gs71108agp-8i rohs-compliant 400 mil tsop-ii 8 ns industrial GS71108AGP-10I rohs-compliant 400 mil tsop-ii 10 ns industrial gs71108agp-12i rohs-compliant 400 mil tsop-ii 12 ns industrial gs71108au-7 6 mm x 8 mm fine pitch bga 7 ns commercial gs71108au-8 6 mm x 8 mm fine pitch bga 8 ns commercial gs71108au-10 6 mm x 8 mm fine pitch bga 10 ns commercial gs71108au-12 6 mm x 8 mm fine pitch bga 12 ns commercial gs71108au-7i 6 mm x 8 mm fine pitch bga 7 ns industrial gs71108au-8i 6 mm x 8 mm fine pitch bga 8 ns industrial gs71108au-10i 6 mm x 8 mm fine pitch bga 10 ns industrial gs71108au-12i 6 mm x 8 mm fine pitch bga 12 ns industrial note: customers requiring delivery in tape and r eel should add the character ?t? to the end of the part number. for example: gs71108a tp-8t. gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 12/13 ? 2001, gsi technology gs71108agu-7 rohs-compliant 6 mm x 8 mm fine pitch bga 7 ns commercial gs71108agu-8 rohs-compliant 6 mm x 8 mm fine pitch bga 8 ns commercial gs71108agu-10 rohs-compliant 6 mm x 8 mm fine pitch bga 10 ns commercial gs71108agu-12 rohs-compliant 6 mm x 8 mm fine pitch bga 12 ns commercial gs71108agu-7i rohs-compliant 6 mm x 8 mm fine pitch bga 7 ns industrial gs71108agu-8i rohs-compliant 6 mm x 8 mm fine pitch bga 8 ns industrial gs71108agu-10i rohs-compliant 6 mm x 8 mm fine pitch bga 10 ns industrial gs71108agu-12i rohs-compliant 6 mm x 8 mm fine pitch bga 12 ns industrial ordering information part number * package access time temp. range note: customers requiring delivery in tape and r eel should add the character ?t? to the end of the part number. for example: gs71108a tp-8t. gs71108atp/u specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.10 3/2009 13/13 ? 2001, gsi technology 1mb asynchronous datash eet revision history rev. code: old; new types of changes format or content page #/revisions/reason 71108a_r1 ? creation of new datasheet 71108a_r1; 71108a_r1_01 content ? added 6 ns speed bin to entire document 71108a_r1_01; 71108a _r1_02 content ? updated all power numbers ? changed 6 mm x 10 mm package designator from u to x 71108a_r1_02; 71108a _r1_03 content ? updated recommended operating conditions table on page 3 ? updated power supply currents table ? changed fpbga package from 6 x 10 to 6 x 8 (package u) 71108a_r1_03; 71108a _r1_04 content ? removed 6 ns speed bin from entire document ? added 7 ns speed bin to entire document 71108a_r1_04; 71108a _r1_05 content ? added missing 300 mil soj mechanical drawing 71108a_r1_05; 71108a _r1_06 content ? updated format ? added rohs-compliant information for tsop-ii package 71108a_r1_06; 71108a _r1_07 content ? added rohs-compliant information for fp-bga package 71108a_r1_07; 71108a _r1_08 content ? added rohs-compliant 400 mil, 32-pin soj 71108a_r1_08; 71108a _r1_09 content ? updated to mp in ordering information table 71108a_r1_09; 71108a _r1_10 content ? removed status column from ordering information table ? removed soj package reference from entire document |
Price & Availability of GS71108AGP-10I |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |