View LVE67C-T2V1-35_6616698.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lb e67c, lv e67c, lt e67c power topled ? enhanced optical power led (aton ? ) non-rohs compliant version of product will be discontinued acc. to os-pd-2005-005. the product itself will remain within rohs compliant version. 2005-04-05 1 besondere merkmale ? geh?usetyp: wei?es p-lcc-4 geh?use, farbloser klarer verguss besonderheit des bauteils: mehr licht durch erh?hten optischen wirkungsgrad; h?here umgebungstemperatur bei gleichem strom im vergleich zur topled ? m?glich wellenl?nge: 469 nm (blau), 503 nm (verde), 525 nm (true green) abstrahlwinkel: lambertscher strahler (120) technologie: ingan optischer wirkungsgrad: 3 lm/w (blau), 10 lm/w (verde), 13 lm/w (true green) gruppierungsparameter: lichtst?rke, wellenl?nge verarbeitungsmethode: fr alle smt-bestcktechniken geeignet l?tmethode: ir reflow l?ten und wellenl?ten (ttw) vorbehandlung: nach jedec level 2 gurtung: 8-mm gurt mit 2000/rolle, ?180 mm oder 8000/rolle, ?330 mm esd-festigkeit: esd-sicher bis 2 kv nach jesd22-a114-b anwendungen ampelanwendung (verde) hinterleuchtung (lcd, schalter, tasten, displays, werbebeleuchtung, allgemeinbeleuchtung) innenbeleuchtung im automobilbereich (z.b. instrumentenbeleuchtung, u. ?.) ersatz von kleinst-glhlampen markierungsbeleuchtung (z.b. stufen, fluchtwege, u.?.) signal- und symbolleuchten scanner features package: white p-lcc-4 package, colorless clear resin feature of the device: more light due to higher optical efficiency; higher ambient temperature at the same current possible compared to topled ? wavelength: 469 nm (blue), 503 nm (verde), 525 nm (true green) viewing angle: lambertian emitter (120) technology: ingan optical efficiency: 3 lm/w (blue), 10 lm/w (verde), 13 lm/w (true green) grouping parameter: luminous intensity, wavelength assembly methods: suitable for all smt assembly methods soldering methods: ir reflow soldering and ttw soldering preconditioning: acc. to jedec level 2 taping: 8 mm tape with 2000/reel, ?180 mm or 8000/reel, ?330 mm esd-withstand voltage: up to 2 kv acc. to jesd22-a114-b applications traffic lights (verde) backlighting (lcd, switches, keys, displays, illuminated advertising, general lighting) interior automotive lighting (e.g. dashboard backlighting, etc.) substitution of micro incandescent lamps marker lights (e.g. steps, exit ways, etc.) signal and symbol luminaire scanners
2005-04-05 2 lb e67c, lv e67c, lt e67c anm.: - 35 gesamter farbbereich, lieferung in einzelgruppen (siehe seite 5 ) note: - 35 total color tolerance range, delivery in single groups (see page 5 ) bestellinformation ordering information typ type emissions- farbe color of emission lichtst?rke 1) seite 17 luminous intensity 1) page 17 i f = 30 ma i v (mcd) lichtstrom 2) seite 17 luminous flux 2) page 17 i f = 30 ma v (mlm) bestellnummer ordering code lb e67c-q2s1-35 blue 90 ... 224 470 (typ.) q62703q6236 lv e67c-s2t2-35 lv e67c-t2v1-35 verde 224 ... 450 355 ... 900 1000 (typ.) 1900 (typ.) q62703q6286 q65110a0185 lt e67c-t2v1-35 true green 355 ... 900 1900 (typ.) q65110a0274
lb e67c, lv e67c, lt e67c 2005-04-05 3 grenzwerte maximum ratings bezeichnung parameter symbol symbol werte values einheit unit lb lv, lt betriebstemperatur operating temperature range t op ? 40 ? + 100 c lagertemperatur storage temperature range t stg ? 40 ? + 100 c sperrschichttemperatur junction temperature t j + 110 + 125 c durchlassstrom forward current ( t a =25c) i f 30 ma sto?strom surge current t 10 s, d = 0.005, t a =25c i fm 300 400 ma sperrspannung 3) seite 17 reverse voltage 3) page 17 ( t a =25c) v r 5 v leistungsaufnahme power consumption ( t a =25c) p tot 135 mw w?rmewiderstand thermal resistance sperrschicht/umgebung 4) seite 17 junction/ambient 4) page 17 sperrschicht/l?tpad junction/solder point r th ja r th js 350 180 k/w k/w
2005-04-05 4 lb e67c, lv e67c, lt e67c kennwerte characteristics ( t a = 25 c) bezeichnung parameter symbol symbol werte values einheit unit lb lv lt wellenl?nge des emittierten lichtes (typ.) wavelength at peak emission i f = 30 ma peak 464 501 520 nm dominantwellenl?nge 5) seite 17 dominant wavelength 5) page 17 i f = 30 ma dom 469* 6 503* 6 525* 9 nm spektrale bandbreite bei 50 % i rel max (typ.) spectral bandwidth at 50 % i rel max i f = 30 ma ? 25 30 33 nm abstrahlwinkel bei 50 % i v (vollwinkel) (typ.) viewing angle at 50 % i v 2 ? 120 120 120 grad deg. durchlassspannung 6) seite 17 (min.) forward voltage 6) page 17 (typ.) i f = 30 ma (max.) v f v f v f 3.3 3.9 4.4 3.3 3.8 4.4 3.3 3.8 4.4 v v v sperrstrom (typ.) reverse current (max.) v r = 5 v i r i r 0.01 10 0.01 10 0.01 10 a a temperaturkoeffizient von peak (typ.) temperature coefficient of peak i f = 30 ma; ?10 c t 100 c tc peak 0.05 0.03 0.04 nm/k temperaturkoeffizient von dom (typ.) temperature coefficient of dom i f = 30 ma; ?10 c t 100 c tc dom 0.04 0.05 0.05 nm/k temperaturkoeffizient von v f (typ.) temperature coefficient of v f i f = 30 ma; ?10 c t 100 c tc v ? 5.0 ? 3.6 ? 3.6 mv/k optischer wirkungsgrad (typ.) optical efficiency i f = 30 ma opt 3 10 13 lm/w * einzelgruppen siehe seite 5 individual groups on page 5
lb e67c, lv e67c, lt e67c 2005-04-05 5 wellenl?ngengruppen (dominantwellenl?nge) 5) seite 17 wavelength groups (dominant wavelength) 5) page 17 gruppe group blue verde true green einheit unit min. max. min. max. min. max. 3 463 467 497 501 516 522 nm 4 467 471 501 505 522 528 nm 5 471 475 505 509 528 534 nm helligkeits-gruppierungsschema brightness groups helligkeitshalbgruppe brightness half group lichtst?rke 1) seite 17 luminous intensity 1) page 17 i v (mcd) lichtstrom 2) seite 17 luminous flux 2) page 17 v (mlm) p2 q1 q2 r1 r2 s1 s2 t1 t2 u1 u2 v1 56 ? 71 71 ? 90 90 ? 112 112 ? 140 140 ? 180 180 ? 224 224 ? 280 280 ? 355 355 ? 450 450 ? 560 560 ? 710 710 ? 900 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) 1200 (typ.) 1500 (typ.) 1900 (typ.) 2400 (typ.) anm.: die standardlieferform von serientypen beinhaltet eine untere bzw. eine obere familiengruppe. diese besteht aus 3 bzw. 4 helligkeitshalbgruppen besteht. einzelne helligkeitshalbgruppen sind nicht bestellbar. note: the standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual brightness half groups. individual brightness half groups cannot be ordered. gruppenbezeichnung auf etikett group name on label beispiel: s2-3 example: s2-3 helligkeitshalbgruppe brightness half group wellenl?nge wavelength s2 4 anm.: in einer verpackungseinheit / gurt ist immer nur eine gruppe fr jede selektion enthalten. note: no packing unit / tape ever contains more than one group for each selection.
2005-04-05 6 lb e67c, lv e67c, lt e67c relative spektrale emission 2) seite 17 relative spectral emission 2) page 17 v( ) = spektrale augenempfindlichkeit / standard eye response curve i rel = f ( ); t a = 25 c; i f = 30 ma abstrahlcharakteristik 2) seite 17 radiation characteristic 2) page 17 i rel = f ( ? ); t a = 25 c 0 400 true green 550 450 500 600 650 nm 70 0 ohl00492 i 20 40 60 80 % 100 rel verde blue v 0 0.2 0.4 1.0 0.8 0.6 ? 1.0 0.8 0.6 0.4 0? 10? 20? 40? 30? ohl01660 50? 60? 70? 80? 90? 100? 0? 20? 40? 60? 80? 100? 120?
lb e67c, lv e67c, lt e67c 2005-04-05 7 durchlassstrom 2) seite 17 forward current 2) page 17 i f = f ( v f ); t a = 25 c relative lichtst?rke 2) 7) seite 17 relative luminous intensity 2) 7) page 17 i v / i v(30 ma) = f ( i f ); t a = 25 c relative lichtst?rke 2) seite 17 relative luminous intensity 2) page 17 i v / i v(25 c) = f ( t j ); i f = 30 ma v ohl02619 1.5 ma i f 2.5 3.5 4.5 5.5 v 6.5 f true green verde, blue 10 -1 5 10 0 10 5 1 10 5 2 i f v i v (30 ma) i ohl00036 0 10 10 1 2 10 10 -2 -1 10 10 0 1 10 ma true green verde blue 5 5 5 ohl02637 -60 0 t ?c v (25 ?c) i i v -40 -20 0 20 40 60 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 true green blue verde j
lb e67c, lv e67c, lt e67c 2005-04-05 8 dominante wellenl?nge 2) seite 17 dominant wavelength 2) page 17 lt , dom = f ( i f ); t a = 25 c dominante wellenl?nge 2) seite 17 dominant wavelength 2) page 17 lb , dom = f ( i f ); t a = 25 c dominante wellenl?nge 2) seite 17 dominant wavelength 2) page 17 lv , dom = f ( i f ); t a = 25 c i ohl00882 510 dom 0 ma nm 20 40 60 80 12 0 515 520 525 530 535 540 550 f true green i ohl10196 467 dom 0 ma nm 20 40 60 80 12 0 468 469 470 471 472 473 474 blue f i ohl10198 498 dom 0 ma nm 20 40 60 80 12 0 500 502 504 506 508 510 512 verde f
lb e67c, lv e67c, lt e67c 2005-04-05 9 maximal zul?ssiger durchlassstrom max. permissible forward current i f = f ( t ) maximal zul?ssiger durchlassstrom max. permissible forward current i f = f ( t ) true green 60 0 0 40 20 temp. ambient t a verde, f i ma blue 10 0 80 c t ohl01309 5 10 15 20 25 30 35 true green 60 0 0 40 20 temp. solder point t s verde, f i ma blue 10 0 80 c t ohl01308 5 10 15 20 25 30 35
lb e67c, lv e67c, lt e67c 2005-04-05 10 zul?ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c, lb zul?ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 25 c, lt / lv zul?ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 85 c, lb zul?ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t a = 85 c, lt / lv ohl01953 10 -5 p t f i 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s d t p t = t p t i f 0.01 0.05 0.2 0.1 0.005 0.02 0.5 d = 0.05 0.10 0.15 0.20 0.25 0.35 1 ohl01955 10 -5 p t f i 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.45 d t p t = t p t i f 0.01 0.05 0.2 0.1 0.005 0.02 0.5 d = 1 ohl01954 10 -5 p t f i 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s d t p t = t p t i f 0.01 0.05 0.2 0.1 0.005 0.02 0.5 d = 0.05 0.10 0.15 0.20 0.25 0.35 1 ohl01956 10 -5 p t f i 10 -4 10 -3 10 -2 10 -1 10 0 10 1 0 a 2 10 s 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.45 d t p t = t p t i f 0.01 0.05 0.2 0.1 0.005 0.02 0.5 d = 1
lb e67c, lv e67c, lt e67c 2005-04-05 11 ma?zeichnung 8) seite 17 package outlines 8) page 17 gewicht / approx. weight: 35 mg gurtung / polarit?t und lage 8) seite 17 verpackungseinheit 2000/rolle, ?180 mm oder 8000/rolle, ?330 mm method of taping / polarity and orientation 8) page 17 packing unit 2000/reel, ?180 mm or 8000/reel, ?330 mm marking package 4?1 gply699 1 ac c c 0.8 (0.031) 0.6 (0.024) 2.6 (0.102) 2.1 (0.083) 2.3 (0.091) 3.0 (0.118) 3.4 (0.134) 3.0 (0.118) (2.4 (0.094)) 0.5 (0.020) 1.1 (0.043) 3.7 (0.146) 3.3 (0.130) 0.12 (0.005) 0.18 (0.007) 0.1 (0.004) typ 0.4 (0.016) 0.6 (0.024) 0.9 (0.035) 0.7 (0.028) 2.1 (0.083) 1.7 (0.067) c c a c ohay0536 4 (0.157) 2.9 (0.114) 1.5 (0.059) 4 (0.157) 3 .6 (0.142) 3.5 (0.138) 2 (0.079) 1.75 (0.069) 8 (0.315) cathode/collector marking
2005-04-05 12 lb e67c, lv e67c, lt e67c empfohlenes l?tpaddesign verwendbar fr topled ? und power topled ? ir reflow l?ten 8) seite 17 recommended solder pad useable for topled ? and power topled ? ir reflow soldering 8) page 17 empfohlenes l?tpaddesign 8) seite 17 wellenl?ten (ttw) recommended solder pad 8) page 17 ttw soldering ohlpy440 padgeometrie fr verbesserte w?rmeableitung improved heat dissipation paddesign for l?tstoplack solder resist 0.8 (0.031) 3.7 (0.146) 1.1 (0.043) 2.3 (0.091) 3.3 (0.130) 1.5 (0.059) 11.1 (0.437) cu fl?che / 16 mm per pad 2 cu-area _ < 3.3 (0.130) kathode/ cathode anode fl?che darf elektrisch nicht beschaltet werden. do not use this area for electrical contact. 0.7 (0.028) fl?che darf elektrisch nicht beschaltet werden. do not use this area for electrical contact. ohay158 3 6.1 (0.240) 2.8 (0.110) 2 (0.079) 3 (0.118) 6 (0.236) 2 (0.079) 1 (0.039) 2.8 (0.110) 0.5 (0.020) solder resist l?tstoplack pcb-direction bewegungsrichtung der platine 2 (0.079) padgeometrie fr improved heat dissipation verbesserte w?rmeableitung paddesign for 2 cu fl?che / > 16 mm per pa d cu-area anode fl?che darf elektrisch nicht beschaltet werden. do not use this area for electrical contact. fl?che darf elektrisch nicht beschaltet werden. do not use this area for electrical contact. cathode kathode/
lb e67c, lv e67c, lt e67c 2005-04-05 13 l?tbedingungen vorbehandlung nach jedec level 2 soldering conditions preconditioning acc. to jedec level 2 ir-reflow l?tprofil (nach ipc 9501) ir reflow soldering profile (acc. to ipc 9501) wellenl?ten (ttw) (nach cecc 00802) ttw soldering (acc. to cecc 00802) ohly0597 0 0 50 100 150 200 25 0 50 100 150 200 250 300 t t c s 240-245 c 10-40 s 183 c 120 to 180 s defined for preconditioning: up to 6 k/s ramp-down rate up to 6 k/s ramp-up rate up to 6 k/s defined for preconditioning: 2-3 k/s ohly0598 0 0 50 100 150 200 250 50 100 150 200 250 300 t t c s 235 c 10 s c ... 260 1. welle 1. wave 2. welle 2. wave 5 k/s 2 k/s ca 200 k/s cc ... 130 100 2 k/s zwangskhlung forced cooling normalkurve standard curve grenzkurven limit curves
2005-04-05 14 lb e67c, lv e67c, lt e67c barcode-produkt-etikett (bpl) barcode-product-label (bpl) gurtverpackung tape and reel tape dimensions in mm (inch) w p 0 p 1 p 2 d 0 e f 4 0.1 (0.157 0.004) 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) 1.5 + 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 3.5 0.05 (0.138 0.002) reel dimensions in mm (inch) a w n min w 1 w 2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) s am ple oha0204 3 x - x - x (g) group: lot number (1t) lot no: (9d) d/c: date code (x) prod no: product code (6p) batch no: batch number lx xxxx product name bin1: bin information color 1 bin2: bin3: ml 2 temp st 245 c r 260 c t 2 additional text r077 demy packvar: packing type product quantity per reel (q)qty: semiconductors osram opto wavelength rank forward voltage rank brightness rank bar code bar code bar code d 0 2 p p 0 1 p w fe direction of unreeling n w 1 2 w a ohay0324 label gurtvorlauf: leader: trailer: gurtende: 13.0 direction of unreeling 0.25 160 mm 160 mm 400 mm 400 mm 8 + 0.3 ? 0.1
lb e67c, lv e67c, lt e67c 2005-04-05 15 trockenverpackung und materialien dry packing process and materials anm.: feuchteempfindliche produkte sind verpackt in einem trockenbeutel zusammen mit einem trockenmittel und einer feuchteindikatorkarte bezglich trockenverpackung finden sie weitere hinweise im internet und in unserem short form catalog im kapitel ?gurtung und verpackung? unter dem punkt ?trockenverpackung?. hier sind normenbezge, unter anderem ein auszug der jedec-norm, enthalten. note: moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. regarding dry pack you will find further information in the internet and in the short form catalog in chapter ?tape and reel? under the topic ?dry pack?. here you will also find the normative references like jedec. kartonverpackung und materialien transportation packing and materials oha00539 osram moisture-sensitive label or print barcode label desiccant humidity indicator barcode lab el osram please check the hic immidiately after bag opening. discard if circles overrun. avoid metal contact. wet do not eat. comparator check dot parts still adequately dry. examine units, if necessary examine units, if necessary 5% 15% 10% bake units bake units if wet, change desiccant if wet, humidity indicator mil-i-8835 if wet, m o istu re lev e l 3 flo or ti m e 1 68 hours moi st ure le vel 6 flo o r ti me 6 h o ur s a) humidi t y i nd ica t or c ar d i s > 1 0 % when rea d at 23 ? c 5 ?c , or r ef l ow, vap or -p h ase reflow, or eq ui va l ent p r oces si ng (peak pa c k age 2 . aft e r t h is bag is op ene d, devices th at w i ll b e subject e d to inf r ared 1. s he lf l i fe in seal e d b a g: 24 mon th s at < 40 ? c a nd < 90 % r el ati v e h um idi t y (r h ) . mois t ur e l ev el 5a at fa ct or y conditions of (if b l a nk , seal d ate i s i d entical w i th date c ode). a ) m o unted w it h in b) sto r ed at bo dy t emp. 3. d ev i ces re q uire ba ki ng , bef ore mo unt ing, i f : b ag sea l d ate m o ist u re lev e l 1 m oist ur e level 2 mo i s ture l e vel 2 a 4. i f b aki n g is re q uire d, b) 2 a or 2b i s not m e t. dat e and tim e op ened: refere nc e i pc / jedec j - std-033 for b ake p r ocedu r e. floo r t i m e s ee be l ow i f bl an k, se e ba r cod e labe l flo or ti m e > 1 ye ar f l o o r t ime 1 yea r f l o o r time 4 w e eks 1 0 % r h . _ < moi st ure l ev el 4 m oi stur e l evel 5 ?c ). opt o sem iconductors m oisture sensi tive thi s bag contai ns caution flo or t i m e 72 h o urs fl o or time 4 8 h ou r s flo or ti m e 2 4 h our s 30 ?c / 60% rh . _ < l evel i f b l a nk , see ba r c o de l a b el oha02044 packvar: r077 additional text p-1+q-1 multi topled muster osram opto semiconductors (6p) batch no: (x) prod no: 1 0 (9d) d/c: 1 1 (1t) lot no: 210021998 123gh1234 0 2 45 (q)qty: 2000 0144 (g) group: 260 c rt 240 c r 3 220 c r ml bin3: bin2: q-1-20 bin1: p-1-20 lsy t676 2 2a temp st r18 demy packvar: r077 additional text p-1+q-1 multi topled muster osram opto semiconductors (6p) batch no: (x) prod no: 1 0 (9d) d/c: 1 1 (1t) lot no: 210021998 123gh1234 0 2 45 (q)qty: 2000 0144 (g) group: 260 c rt 240 c r 3 220 c r ml bin3: bin2: q-1-20 bin1: p-1-20 lsy t676 2 2a temp st r18 demy osram barcode label packing sealing label barcode lab el moisture level 3 floor time 168 hours moisture level 6 floor time 6 hours a) humidity indicator card is > 10% when read at 23 ?c 5 ?c, or reflow, vapor-phase reflow, or equivalent processing (peak package 2. after this bag is opened, devices that will be subjected to infrared 1. shelf life in sealed bag: 24 months at < 40 ?c and < 90% relative humidity (rh). moisture level 5a at factory conditions of (if blank, seal date is identical with date code). a) mounted within b) stored at body temp. 3. devices require baking, before mounting, if: bag seal date moisture level 1 moisture level 2 moisture level 2a 4. if baking is required, b) 2a or 2b is not met. date and time opened: reference ipc/jedec j-std-033 for bake procedure. floor time see below if blank, see bar code label floor time > 1 year floor time 1 year floor time 4 weeks 10% rh. _ < moisture level 4 moisture level 5 ?c). opto semiconductors moisture sensitive this bag contains caution floor time 72 hours floor time 48 hours floor time 24 hours 30 ?c/60% rh. _ < level if blank, see bar code label
2005-04-05 16 lb e67c, lv e67c, lt e67c attention please! the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. if printed or downloaded, please find the latest version in the internet. packing please use the recycling operators known to you. we can also help you ? get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 9) page 17 may only be used in life-support devices or systems 10) page 17 with the express written approval of osram os. revision history: 2005-04-05 previous version: 2005-03-01 page subjects (major changes since last revision) date of change 7 new diagram permissible forward current 2003-06-02 9 new diagrams pulse derating 2003-06-30 1 esd norm 2003-09-02 3 ambient temperature 2003-09-02 all new template 2003-09-30 2 ordering code 2005-03-01 all discontinuation of non-rohs compliant product versions 2005-04-05
lb e67c, lv e67c, lt e67c 2005-04-05 17 fu?noten: 1) helligkeitswerte werden mit einer stromeinpr?gedauer von 25 ms und einer genauigkeit von 11% ermittelt. 2) wegen der besonderen prozessbedingungen bei der herstellung von led k?nnen typische oder abgeleitete technische parameter nur aufgrund statistischer werte wiedergegeben werden. diese stimmen nicht notwendigerweise mit den werten jedes einzelnen produktes berein, dessen werte sich von typischen und abgeleiteten werten oder typischen kennlinien unterscheiden k?nnen. falls erforderlich, z.b. aufgrund technischer verbesserungen, werden diese typischen werte ohne weitere ankndigung ge?ndert. 3) die led kann kurzzeitig in sperrichtung betrieben werden. 4) r thja ergibt sich bei montage auf pc-board fr 4 (padgr??e 16 mm 2 je pad) 5) wellenl?ngen werden mit einer stromeinpr?gedauer von 25 ms und einer genauigkeit von 1 nm ermittelt. 6) spannungswerte werden mit einer stromeinpr?gedauer von 1 ms und einer genauigkeit von 0,1 v ermittelt. 7) im gestrichelten bereich der kennlinien muss mit erh?hten helligkeitsunterschieden zwischen leuchtdioden innerhalb einer verpackungseinheit gerechnet werden 8) ma?e werden wie folgt angegeben: mm (inch) 9) ein kritisches bauteil ist ein bauteil, das in lebenserhaltenden apparaten oder systemen eingesetzt wird und dessen defekt voraussichtlich zu einer fehlfunktion dieses lebenserhaltenden apparates oder systems fhren wird oder die sicherheit oder effektivit?t dieses apparates oder systems beeintr?chtigt. 10) lebenserhaltende apparate oder systeme sind fr (a) die implantierung in den menschlichen k?rper oder (b) fr die lebenserhaltung bestimmt. falls sie versagen, kann davon ausgegangen werden, dass die gesundheit und das leben des patienten in gefahr ist. published by osram opto semiconductors gmbh wernerwerkstrasse 2, d-93049 regensburg www.osram-os.com ? all rights reserved. remarks: 1) brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) due to the special conditions of the manufacturing processes of led, the typical data or calculated correlations of technical parameters can only reflect statistical figures. these do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. if requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) driving the led in reverse direction is suitable for short term application. 4) r thja results from mounting on pc board fr 4 (pad size 16 mm 2 per pad) 5) wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 6) forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 v. 7) in the range where the line of the graph is broken, you must expect higher brightness differences between single leds within one packing unit. 8) dimensions are specified as follows: mm (inch). 9) a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 10) life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health and the life of the user may be endangered.

▲Up To Search▲

Price & Availability of LVE67C-T2V1-35

	To Download LVE67C-T2V1-35 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .