Part Number Hot Search : 
KBPC2500 B5A45VI MC3403 B5A45VI KRC854E EV1050 MAX1720 10X10
Product Description
Full Text Search
 

To Download S095B7-5AP1-TR40B Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hshm press-fit socket 2 mm type b19, 95 signal contac ts, 5 rows, right angle hshm series physical performance environmental metpak is a trademark of 3m company. insulation material: high temperature th ermoplastic (lcp) flammability: ul 94v-0 contact material: copper alloy plating: tr30 or tr40b mechanical normal force (nominal): 0.57 n [ 58 g ] signal, 0.74 n [ 75 g ] shield engagement force (nominal): 0.32 n [ 33 g ] signal, 0.22 n [ 22 g ] shield separation force (nominal): 0.20 n [ 20 g ] signal, 0.20 n [ 20 g ] shield wipe (nominal, shortest contact): 2.67 mm [ 0.105 in. ] signal, 1.57 mm [ 0.062 in ] shield durability: 250 cycles with tr40b plating application: this module is not suitable for stand-alone use electrical data rate: 5 gb/s characteristic impedance: 50 ? single-ended, 100 ? differential current rating (fully loaded): 1 a at 70 c signal insulation resistance: 10 4 m ? at 100 v dc withstanding voltage: 750 v rms temperature rating: -55 c to 125 c ts-2221-b sheet 1 of 3 date modified: august 22, 2007 ? up to 5 gb/s data rates ? low crosstalk at high frequencies ? 50/100 ? (single-ended /differential) impedance ? modular/scalable fo rmat iec 61076-4-101 ? 63 mated lines per linear inch ? dual beam contact constr uction for high reliability ? end-to-end stackable with 5 row 3m? metpak? cp2, hm and hshm sockets ? mates with 3m? metpak? hshm headers ? see regulatory inform ation appendix (ria) for chemical complia nce information ul file no.: e68080
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hshm press-fit socket 2 mm type b19, 95 signal contac ts, 5 rows, right angle hshm series 0 0.0 0.00 mm 3 0.3 0.13 mm [inch] tolerance unless noted [ ] dimensions for reference only ordering information hshm - s095bx - 5ap1 - xxxxx high speed option: 1 = row differential applications 4 = coaxial and column differential applications 7 = stripline applications (75 ? ) plating m [ " ]: tg30 = 0.76 [ 30 ] min. au contact area 2.54 [ 100 ] min. snpb terminal area 1.27 [ 50 ] min. ni all over (ria e2 & c2 apply) tr40b = 0.127 [ 5 ] min. hard au contact area 1.02 [ 40 ] min. pdni contact area 0.10 [ 4 ] min. pd strike contact area 2.54 [ 100 ] min. snpb terminal area 1.27 [ 50 ] min. ni all over (ria e2 & c2 apply) ts-2221-b sheet 2 of 3
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hshm press-fit socket 2 mm type b19, 95 signal contacts , 5 rows, right angle hshm series ts-2221-b sheet 3 of 3 finished hole dia. ( "d" ) cu. thickness snpb thickness drilled hole dia. 0.457 - 0.559 [.0180 - .0220] 0.025 - 0.045 [.0010 - .0018] 0.008 -0.018 [.0003 - .0007] 0.584 - 0.625 [.0230 - .0246] hole plating table mm [in.]
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed . unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217b-b
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice ll tatement tecnical inormation and recommendation related to prodct are baed on inormation belieed to be reliable bt te accracy or completene i not aranteed. eore in ti prodct yo mt ealate it and determine i it i itable or yor intended application. o ame all ri and liability aociated it c e. ny tatement related to te prodct ic are not contained in crrent pblication or any contrary tatement contained on yor prcae order all ae no orce or eect nle eprely areed pon in ritin by an atoried ocer o . warranty; limited remedy; limited liability. i prodct ill be ree rom deect in material and manactre or a period o one year rom te time o prcae. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defectie within the warranty period stated aboe, your exclusie remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. 3m . all rights resered. riabb 3 3m electronics interconnect products rier place bld. austin, t u.s.a. 33 3m is a trademar of 3m company.


▲Up To Search▲   

 
Price & Availability of S095B7-5AP1-TR40B

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X