terminals k8-516r-d 5/16 .331 .591 .543 1.161 8.4 15.0 13.8 29.8 k8-38r-d 3/8 .413 .591 .543 1.161 10.5 15.0 13.8 29.8 k8-12r-d 1/2 .512 .787 .591 1.319 13.0 20.0 15.0 33.5 non-insulated large ring terminals catalog wire bolt dimension number range size (d2) wf l edd1t inch mm k6-10r-d #10 .209 .472 .524 1.173 5.3 12.0 13.3 29.8 k6-14r-d 1/4 .252 .472 .524 1.173 6.4 12.0 13.3 29.8 k6-516r-d 5/16 .331 .630 .559 1.280 8.4 16.0 14.2 32.5 k6-38r-d 3/8 .413 .630 .559 1.280 10.5 16.0 14.2 32.5 k6-12r-w 1/2 .512 .866 .780 1.614 13.0 22.0 19.8 41.0 .337 .283 .177 .047 8.5 7.2 4.5 1.2 .413 .354 .228 .059 10.5 9.0 5.85 1.5 6 a.w.g. 14 mm 2 8 a.w.g. 8 mm 2 k8-8r-d #8 .169 .315 .366 .846 4.3 8.0 9.3 21.5 k8-10r-d #10 .209 .346 .429 .937 5.3 8.8 10.5 23.8 k8-14r-d 1/4 .252 .472 .366 .937 6.4 12.0 9.3 23.8 box quantity: c=100; cc=200; (w)=250; (d)=500; for mylar tape, replace box quantity with (t). example: k6-10r-t. see pages in back of catalog for complete tool information. tool and die selection chart on page m42. terminal material: copper ul file #e9809 *pending ul listing ? brazed seam ? chamfered barrel ? internal barrel serrations ? ? 2002 thomas & betts corporation. specifications are subject to change without notice. www.tnb.com m11 k4-8r-w* #8 .169 .481 .594 1.307 4.3 12.2 15.1 33.2 k4-10r-w* #10 .209 .481 .594 .1.307 5.3 12.2 15.1 33.2 k4-14r-w* 1/4 .252 .481 .594 1.299 6.4 12.2 15.1 33.0 k4-516r-w* 5/16 .331 .650 .531 1.319 8.4 16.5 13.5 33.5 k4-38r-w* 3/8 .413 .650 .531 1.319 10.5 16.5 13.5 33.5 k4-12r-cc* 1/2 .512 .866 .776 1.661 13.0 22.0 19.7 42.5 k2-10r-cc* #10 .209 .602 .685 1.535 5.3 15.3 17.4 39.0 k2-14r-cc* 1/4 .252 .602 .685 1.535 6.4 15.3 17.4 39.0 k2-516r-cc* 5/16 .331 .602 .685 1.535 .551 .524 .370 .071 8.4 15.3 17.4 39.0 14.0 13.3 9.4 1.8 k2-38r-cc* 3/8 .413 .602 .685 1.535 10.5 15.3 17.4 39.0 k2-12r-cc* 1/2 .512 .866 .697 1.681 13.0 22.0 17.7 42.7 .472 .453 .303 .067 12.0 11.5 7.7 1.7 4 a.w.g. 22 mm 2 2 a.w.g. 38 mm 2 tbm6s for tooling information for nylon insulated large ring terminals, see page m37. tools used with non-insulated large ring terminals kt-2500 m spec-kon ? 412031.m01 spec 3/5 3/14/03 10:41 am page 11
|
