View OSSRD2001D_6513100.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 1 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a description: the ossr solid state relay series are electronic controlled switches, they contain no moving parts. when voltage is applied to the input, a light emitting diode or led illuminates a photosensor which controls the internal output circuit. the output circuit is utilized to drive high current loads. the input and output are optically isolated. the ossr series incorporates a zero crossing circuit which minimizes current and noise surges due to resistive and inductive loads. optek provides three different electrical configurations of the ossr series: dc input ? ac output, ac input ? ac output and dc input ? dc output. these configurations meet most industry applications. the OSSRD2001D and ossrd2002a are offered in a standard 4-pin sip, single in-line package, for pcb mounting applications. the package offers a light weight, compact and robust molded epoxy body with extended operating temperature range of up to 100c. the OSSRD2001D input circuit features a dc range from 4 to 24 vdc. the output consists of a photo darlington circuit featuring a load current rating of 3 amps and a maximum load voltage of 100vdc and 30 watts with normally open output. the ossrd2002a input circuit features a dc range from 4 to 32 vdc. the output consists of a triac circuit featuring a load current rating of 3 to 40 amps and a maximum load voltage of 250vac with normally open output. features: ? molded epoxy package ? zero crossing circuit ? high input/output optical isolation 4k vrms ? small size and light weight ? can be installed directly on the p.c. board ? fast switching time ? non-contact switch approval agency: ? ul certification no: e321810 applications: ? temperature controlled systems ? office equipment ? motor controls ? industrial equipment ? light controls systems ? heater control ? appliances ? hvac temperature control ? plastic molding ? packaging industry
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 2 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a part number pin # 1 2 3 4 OSSRD2001D a k c e (dar.) ossrd2002a a k a1 (+) a2 (-) package outline dimensions: 4-pin sip schematic: top view OSSRD2001D ossrd2002a - + - + input load pin configuration: - + - + input load all dimensions in inches [millimeters] tolerance: 0.2mm [millimeters]
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 3 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a part number symbolization vdc input with vdc/vac output devices ordering information part number input min. tgr current ift max. output current min. ouput current max. vout min. vout output type br. vol. configuration input to output OSSRD2001D 4-24vdc 100ma 3a 0.05a 100vdc - dc 4000vac a k?c e (darl.) ossrd2002a 4-32vdc 50ma 3a 0.05a 250vac 50vac ac 4000vac a k?a1(+) a2(-) configuration: definition of terms led identification?sens or identification configuration information led a = anode k = cathode sensor c = collector e = emitter a1(+) and a2(-) = main terminals of triac
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 4 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a absolute maximum ratings (t a = 25 o c unless otherwise noted) storage temperature OSSRD2001D, ossrd2002a -30 c to +125 c operating temperature OSSRD2001D, ossrd2002a -30 c to +100 c isolation voltage (input to output) OSSRD2001D, ossrd2002a 4,000 vrms input diode input signal voltage?( v in ) OSSRD2001D ossrd2002a 4?24 vdc 4?32 vdc drop-out voltage?(vdo) OSSRD2001D, ossrd2002a 1 vdc output triac rms on-state current - ( i t ) ossrd2002a 3 arms peak one cycle surge current - (i surge) OSSRD2001D @ 50s ossrd2002a @ 8.3ms 9 a 30 a repetitive peak-off state voltage?( v drm ) ossrd2002a 600 v operating frequency?(f) ossrd2002a 47?70 hz critical rate of rise of on-state current?(di/dt) ossrd2002a 50 a/s load supply voltage?( v out ) ossrd2002a 250 vrms ac soldering temperature 10 sec. OSSRD2001D, ossrd2002a 260 c output power dissipation?(pc) OSSRD2001D 30 w collector voltage - ( v ceo ) OSSRD2001D 100 vdc output current - (io) OSSRD2001D 3 a output photo darlington
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 5 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a electrical characteristics (t a = 25 o c unless otherwise noted) symbol parameter min typ max units test conditions input diode v pu pick-up voltage OSSRD2001D, ossrd2002a - - 4 vdc i t = 1arms i in input current OSSRD2001D ossrd2002a - 5 - - 25 12 ma v in = 4 - 24 v v in = 4 - 32 v output triac v t on-state voltage ossrd2002a - - 1.5 vrms i t = 1arms i op operating current ossrd2002a 50 - - marms vout = 240vrms i leak leakage current ossrd2002a - - 7 marms vout = 240vrms dv/dt critical rate of rise of off-state voltage ossrd2002a 50 200 - v/s see note 1. - zero-cross voltage ossrd2002a - yes - - - v out load voltage rating ossrd2002a 50 - 280 vac i t = 50marms min i ft minimum trigger current ossrd2002a - - 10 25 ma v drm = 600 v riso isolation resistance input to output ossrd2002a 10^10 - - dc500 v t on turn-on time ossrd2002a - - 8.3 ms 60hz ac t off turn-off time ossrd2002a - - 8.3 ms 60hz ac rth (j-c) l thermal resistance (between junction and case) - 1.3 - c/w ? c t terminal capacitance OSSRD2001D - 30 - pf v=0, f=1khz note1: output (dv/dt) protection is provided in all models, and they are designed to switch resistive or inductive loads to 0.2 factor . the dv/dt rating is based on source impedance of 50 ohms.
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 6 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a electrical characteristics (t a = 25 o c unless otherwise noted) symbol parameter min typ max units test conditions output photodiode bv ceo collector-emitter breakdown voltage ossrd0001d 100 - - vrms i f = 0ma i leak output leakcurrent ossrd0001d - - 1.5 a i f = 0ma, v=100v i c collector current ossrd0001d 0.05 - 3 a i f = 1ma, v ce =2v v ce(sat) collector-emitter saturation voltage ossrd0001d - yes - - i f = 20ma, i c =100ma riso isolation resistance ossrd0001d 10 10 - - dc500 v cr floating capacitance ossrd0001d - - 3 pf v=0, f=1mhz f c cut-off frequency ossrd0001d 2 - - hz v ce = 2v, i c =200ma, r l =200ma t f response time (rise) ossrd0001d - - 500 s v ce = 2v, i c =20ma, r l =200ma t r response time (fall) ossrd0001d - - 200 s v ce = 2v, i c =20ma, r l =200ma
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 7 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a OSSRD2001D characteristic data curves
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 8 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a ossrd2002a characteristic data curves
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 9 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a label identification: description: size: 3? (7.4 cm) x 2.2? (5.5 cm) lettering shall be black on white background. format shall be as: notes: 1. the date code is a 4-digit code for date of manufacture where yy is the last two digits of the year, and ww is week number of manufacture. 2. the lot i.d. is the manufacturing location lot identification where y is the year of manufacture, nnnn is a sequential lot identifier, and ddd is the day of the year of manufacture. ? or use equivalent label format. parameter failure criteria test conditions room temperature operating life (for light emitting diodes only) 20% t a = 25c, i f = 60ma or max. rated, time = 1000 hours high humidity, high temperature reverse bias 20% jedec, method a101-b t a = 85c, humidity = 85%rh, time = 1000 hours high temperature forward bias 20% jedec, method a108-a t a = 70c, i f = 20ma, time = 1000 hours autoclave 0 fail t a = 121c, pressure = 15psi, humidity = 100% ir reflow / solderability test 0 fail jedec (j-std-020) / mil-std-883e, method 2003.7 mttf @ 90% confidence 150, 000 min. @ 25c, 25madc moisture sensitivity level msl 1 per jdec stnd j-std-020b glass transition of body 125 c min. dsc test method temperature humidity-bias 20% 85c, 85%rh, 500hrs, 80% min iceo temperature cycle 20% per method 1010.7 of mil-std-883e high temperature storage 20% 85c, 500hrs quality and reliability requirements
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 10 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a packaging information: tray and carton packaging specifications: tube packaging dimensions all dimensions in millimeters
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 11 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a tray and carton packaging specifications (cont.): carton packaging dimensions inner carton all dimensions in millimeters medium carton all dimensions in millimeters
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.3 11/09 page 12 of 12 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. solid state relays 4-pin sip package?vdc input?vac/vdc output OSSRD2001D and ossrd2002a tray and carton packaging specifications (cont.): carton packaging dimensions large carton all dimensions in millimeters

▲Up To Search▲

Price & Availability of OSSRD2001D

	To Download OSSRD2001D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .