.079" cl insulation displacement socket IDS-2 series 23 apr 07 major league electronics .079" cl insulation displacement socket pins per row IDS-2 ordering information lf - - - - lead free - xx d 02 xx xx - xxx double style 02 = black polarized position 006 - 068 leave blank if not needed options 01 = with strain relief 02 = without strain relief only available in: 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 15, 16, 17, 18, 19, 20, 22, 24, 25, 28, 30, 32, 34 plating options - 10 gold on contact area g standard plating = ft - gold flash over entire pin f - gold flash on contact area / matte tin on remainder - 30 gold on contact area ft h 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com insulator contact insulation resistance contact resistance pbt, glass reinforced, rated ul 94v-0 phosphor bronze 3000 m ? min. 30 m ? max. current rating dielectric withstanding operating temperature terminated with 1 amp 500v ac for one minute -40c to +105c .039" [1.0mm] pitch flat ribbon cable mates with: shstl-2, shbstc-2, shbstcm-2, shtshc-2, shtshr-2, shtshsm-2 products cut to specific sizes are uncancellable/nonreturnable parts are subject to change without notice pins per row dimension ab 3 .440 [11.2] .157 [4.0] 4 .519 [13.2] .236 [6.0] 5 .598 [15.2] .315 [8.0] 6 .677 [17.2] .394 [10.0] 7 .755 [19.2] .472 [12.0] 8 .834 [21.2] .551 [14.0] 9 .913 [23.2] .629 [16.0] 10 .992 [25.2] .708 [18.0] 11 1.070 [27.2] .787 [20.0] 12 1.149 [29.2] .866 [22.0] 13 1.228 [31.2] .945 [24.0] 15 1.385 [35.2] 1.102 [28.0] 16 1.464 [37.2] 1.181 [30.0] 17 1.543 [39.2] 1.260 [32.0] 18 1.622 [41.2] 1.339 [34.0] 19 1.700 [43.2] 1.417 [36.0] 20 1.779 [45.2] 1.496 [38.0] 22 1.937 [49.2] 1.653 [42.0] 24 2.094 [53.2] 1.811 [46.0] 25 2.173 [55.2] 1.890 [48.0] 28 2.409 [61.2] 2.126 [54.0] 30 2.566 [65.2] 2.283 [58.0] 32 2.724 [69.2] 2.441 [62.0] 34 2.881 [73.2] 2.598 [66.0]
.079" cl insulation displacement socket IDS-2 series 23 apr 07 revisions revision c - (3rd mar 2011) contact plating amended. revision b ft - gold flash on contact area / matte tin on tail revision c ft - gold flash on contact area / matte tin on remainder revision b - (3rd feb 2011) amendment to plating opti ons in ordering grid. revision a g - 10 gold on contact area/flash on tail gt - 10 gold on contact area/matte tin on tail ft - 3 selective gold t - matte tin all over f - gold flash over entire pin (standard plating = t) revision b ft - gold flash on contact area / matte tin on tail f - gold flash over entire pin g - 10u gold on contact area h - 30u gold on contact area (standard plating = ft ) width dimension (inclusive of polarization bump) changed: was: .185 (4.70) now: .193 (4.90) dimension table changed: was: dimension a - xx.1 (eg 3 pins per row, dim a was 11.1, dim a is now 11.2) now: dimension a - xx.2 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com
|
