ferrite ceramics d a t a sh eet product speci?cation supersedes data of march 1999 file under ferrite ceramics, ma01 1999 dec 23 rm5 rm cores and accessories
1999 dec 23 2 philips components product speci?cation rm cores and accessories rm5 core sets effective core parameters symbol parameter value unit s (i/a) core factor (c1) 1.01 mm - 1 v e effective volume 450 mm 3 i e effective length 21.4 mm a e effective area 21.2 mm 2 a min minimum area 14.8 mm 2 m mass of set ? 3.0 g handbook, halfpage mgc049 12.3 0 0.5 2.6 6.8 6.3 0 0.4 6 14.9 max m1.4 2.04 0.06 0 o 4.9 0 0.2 o 10.4 0.1 10.2 0.4 0 0.4 0 o 9.1 0.2 2 fig.1 rm5 core set. dimensions in mm. core sets for ?lter applications clamping force for a l measurements, 25 10 n. grade a l (nh) m e air gap ( m m) type number (with nut) type number (without nut) 3d3 40 3% ? 33 ? 700 rm5-3d3-e40/n rm5-3d3-e40 63 3% ? 51 ? 400 rm5-3d3-e63/n rm5-3d3-e63 100 3% ? 82 ? 300 rm5-3d3-e100/n rm5-3d3-e100 800 25% ? 630 ? 0 - rm5-3d3 3h3 160 3% ? 130 ? 200 rm5-3h3-a160/n rm5-3h3-a160 250 3% ? 200 ? 120 rm5-3h3-a250/n rm5-3h3-a250 315 3% ? 250 ? 90 rm5-3h3-a315/n rm5-3h3-a315 400 5% ? 320 ? 70 rm5-3h3-a400/n rm5-3h3-a400 1650 25% ? 1310 ? 0 - rm5-3h3
1999 dec 23 3 philips components product speci?cation rm cores and accessories rm5 inductance adjusters general data parameter specification material of head and thread polypropylene (pp), glass fibre reinforced maximum operating temperature 125 c handbook, halfpage mbe079 7.8 3.05 m 1.4 2.13 o 0.07 0 1.5 min 0.5 fig.2 rm5 inductance adjuster. dimensions in mm. inductance adjuster selection chart note 1. maximum adjustment range. grade a l (nh) types for low adjustment d l/l % (1) types for medium adjustment d l/l % (1) types for high adjustment d l/l % (1) 3h3 63 ---- adj-rm4/rm5-red 23 100 -- adj-rm4/rm5-red 15 adj-rm4/rm5-brown 24 160 adj-rm4/rm5-red 11 adj-rm4/rm5-brown 15 adj-rm4/rm5-grey 28 250 adj-rm4/rm5-red 6 adj-rm4/rm5-brown 10 adj-rm4/rm5-grey 17 315 adj-rm4/rm5-brown 7 adj-rm4/rm5-grey 13 -- 400 adj-rm4/rm5-brown 5 adj-rm4/rm5-black 14 -- 3d3 40 -- adj-rm4/rm5-green 15 adj-rm4/rm5-red 30 63 ---- adj-rm4/rm5-red 20 100 -- adj-rm4/rm5-red 14 --
1999 dec 23 4 philips components product speci?cation rm cores and accessories rm5 coil former general data winding data for 4-pins rm5 coil former parameter specification coil former material phenolformaldehyde (pf), glass-reinforced, ?ame retardant in accordance with ul 94v-0 ; ul ?le number e167521(m) pin material copper-tin alloy (cusn), tin-lead alloy (snpb) plated maximum operating temperature 180 c, iec 60085 class h resistance to soldering heat iec 60068-2-20 , part 2, test tb, method 1b, 350 c, 3.5 s solderability iec 60068-2-20 , part 2, test ta, method 1 number of sections number of pins pin positions used winding area (mm 2 ) winding width (mm) average length of turn (mm) type number 1 4 all 9.5 4.8 25 csv-rm5-1s-4p 2 4 all 2 4.35 2 2.2 25 csv-rm5-2s-4p handbook, full pagewidth mgc052 2.54 0.05 1 0.15 0 0.65 0.8 0 0.1 6.1 0 0.15 (4.8 min) 0.4 0.4 0.5 o 5 5.95 o 0 0.2 10.1 o 0 0.2 5.08 10.16 3 4 2 1 7 5 0.15 0 0.6 fig.3 rm5 coil former; 4-pins. dimensions in mm.
1999 dec 23 5 philips components product speci?cation rm cores and accessories rm5 general data coil former winding data for 6-pins rm5 coil former parameter specification coil former material unsaturated polyester (up), glass-reinforced, ?ame retardant in accordance with ul 94v-0 ; ul ?le number e61040 (m) solder pad material copper-tin alloy cusn), tin-lead alloy (snpb) plated maximum operating temperature 180 c, iec 60085 class h resistance to soldering heat iec 60068-2-20 , part 2, test tb, method 1b, 350 c, 3.5 s solderability iec 60068-2-20 , part 2, test ta, method 1 number of sections number of pins winding area (mm 2 ) winding width (mm) average length of turn (mm) type number 1 6 9.2 4.68 24.9 cpv-rm5-1s-6p-g handbook, full pagewidth 0.1 cbw511 10.16 5.08 6.9 min. 5 +0.15 0 0.7 min. ? 10.1 0 - 0.2 ? 5.95 0 - 0.2 6.15 0 - 0.2 4.68 min. 0.52 0.75 0.75 ? 0.5 5 0.45 1 +0.15 0 2.54 fig.4 coil former for rm5; 6-pins dimensions in mm.
1999 dec 23 6 philips components product speci?cation rm cores and accessories rm5 mounting parts general data item specification clamping force ? 12 n clip material steel clip plating silver (ag) solderability iec 60068-2-20 , part 2, test ta, method 1 type number cli/p-rm4/5 handbook, halfpage mbe080 10.1 8.5 4 0.7 1.3 2.0 fig.5 mounting clip for rm5. dimensions in mm.
|
