data sheet doc. no : qw0905- rev. : date : 10 - feb. - 2006 a LSBI5232 rectangle type led lamps LSBI5232 ligitek electronics co.,ltd. property of ligitek only lead-free parts pb
2.54typ 1.0min note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation + - 7.0 25.0min 0.5 typ 1.5max 2.0 5.0 package dimensions LSBI5232 part no. ligitek electronics co.,ltd. property of ligitek only 1/5 page 50% 75% 100%50% 0 25%25%75%100% -30 -60 30 60 0
page 2/5 unit sbi ratings ligitek electronics co.,ltd. property of ligitek only ma mw ma a v 30 120 70 i f pd i fp 50 500 ir t opr esd -20 ~ +80 tstg -30 ~ +100 viewing angle 2 1/2 (deg) luminous intensity @20ma(mcd) 10.0 5.0 typ. min. dominant wave length dnm spectral halfwidth nm 3.8 65 465 typ. max. 4.7 forward voltage @20ma(v) parameter peak forward current duty 1/10@10khz forward current reverse current @5v electrostatic discharge( * ) power dissipation operating temperature storage temperature material blue ingan/sic emitted LSBI5232 part no color lens symbol absolute maximum ratings at ta=25 note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. typical electrical & optical characteristics (ta=25 ) white diffused 146 peak wave length pnm 430 static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. * LSBI5232 part no.
100 45 fig.5 forward current vs. ambient temperature fig.3 relative intensity vs. forward current 5 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve f o r w a r d c u r r e n t ( m a d c ) 10 0 0 20 30 ambient temperature ( ) 50 2575 r e l a t i v e i n t e n s i t y ( % ) 40 0 0 5 25 forward current (ma dc) 15 10 2035 30 40 50 25 75 125 100 20 f o r w a r d c u r r e n t ( m a d c ) 0 1 5 10 15 forward voltage(v) 2 3 4 30 25 sbi chip r e l a t i v e i n t e n s i t y lead temperature ( ) 0 025 50 75 100 fig.4 relative intensity vs. lead temperature 1 10 3/5 page r e l a t i v e i n t e n s i t y ( % ) 480 wavelength (nm) 380 0 430 0.5 630 530 580 680 fig.2 relative intensity vs. wavelength 1.0 ligitek electronics co.,ltd. property of ligitek only LSBI5232 part no.
page 4/5 ligitek electronics co.,ltd. property of ligitek only soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to body) 2.wave soldering profile dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 260 c3sec max 5 /sec max 260 120 temp( c) time(sec) 150 50 100 2 /sec max 25 0 preheat 0 60 seconds max LSBI5232 part no.
page 4/4 reference standard test condition test item reliability test: ligitek electronics co.,ltd. property of ligitek only description mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-202:103b jis c 7021: b-11 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 high temperature storage test low temperature storage test high temperature high humidity test 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs thermal shock test solder resistance test solderability test 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.t.sol=230 5 2.dwell time=5 1sec the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. the purpose of this test is the resistance of the device under tropical for hours. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. this test intended to see soldering well performed or not. operating life test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 LSBI5232 part no.
|
