specification control drawing tyco electronics corporation 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: soldersleeve device shield termination with braid unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] document no.: s03-06/-10-r tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. prod. rev.: see table doc. issue: 3 date: 21-aug-00 drawn by: m. foronda cage code: 06090 replaces: d982099 dcr number: d000418 scale: none size: a sheet: 1 of 1 if this document is printed it becomes uncont rolled. check for the latest revision. ? 2004 tyco electronics corporation. all rights reserved product revision component di mensions shall accommodate with cable dimensions product name ident. code l 1.75 (l 0.07) ?b min ?c min h min ?e max ?f min ?d max s03-06-r c s0306r 16.50 (0.650) 1.90 (0.070) 2.65 (0.105) 8.25 (0.325) 2.65 (0.105) 0.90 (0.035) 1.90 (0.075) s03-07-r c s0307r 16.50 (0.650) 2.65 (0.105) 3.68 (0.145) 8.25 (0.325) 3.68 (0.145) 1.40 (0.055) 2.65 (0.105) s03-08-r c s0308r 16.50 (0.650) 4.30 (0.170) 5.08 (0.200) 8.25 (0.325) 5.08 (0.200) 2.15 (0.085) 4.30 (0.170) s03-09-r c s0309r 19.10 (0.750) 5.95 (0.235) 6.45 (0.255) 8.25 (0.325) 6.45 (0.255) 3.30 (0.130) 5.95 (0.235) s03-10-r c s0310r 19.10 (0.750) 7.00 (0.275) 7.60 (0.300) 8.25 (0.325) 7.60 (0.300) 4.30 (0.170) 7.00 (0.275) materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. solder preform with flux and thermal indicator solder: ty pe sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: color change violet to colorless. 3. meltable rings: stabilized thermoplastic. color - blue. 4. pre-installed braid: nickel plated copper strands. cma 654. application 1. these parts are designed to provide an environmen t protected shield termination on cables, rated for 125 c minimum, meeting the dimensional criteria listed and having tin or silver plat ed shields and insulation compatible with the insert material. for compatible insulations, see mil-s-83519/2 or consult raychem. 2. when installed per raychem proce ss standard rcps-100-70, assemblies will m eet those requirements of raychem specification rt-1404 and mil-s-83519/2 which do not require electrical testing while parts are immersed in water. 3. temperature range: -55 c to +150 c. 4. parts shall be marked with identification code per table. for best results, prepare the cable as shown: soldersleeve is a trademark of tyco electronics corporation
|