infrared detector modules with preamps high sensitivity modules of easy-to-use metal dewar type www.hamamatsu.com 1 these devices combine a dewar type detector with a compatible preampli er, and easily operate to detect infrared radiation just by connecting to a dc power supply. ingaas and insb detectors are provided as standard devices (liquid nitrogen cooling). custom- designed devices with different active areas, fov or ampli er gain, etc. are also available to meet your speci c needs. accessories compact integral detector unit infrared detection optimum connections between the detector element and pre- ampli er allow ampli ed signals to be easily obtained. cable (for dc power supply): 2 m (connector installed at one end) a4372-02 bnc-bnc coaxial cable (for signal output): 2 m instruction manual speci cations / absolute maximum ratings electrical and optical characteristics (typ.) type no. detector element active area external power supply * 1 absolute maximum ratings supply voltage (v) supply capacitance external input voltage operating temperature topr storage temperature tstg (mm) min. typ. max. (ma) (v) (c) (c) g7754-01 ingaas 1 12.0 15.0 17.5 23 18 0 to +40 -20 to +50 g7754-03 3 p7751-01 insb (p5968-060) 0.6 30 p7751-02 insb (p5968-200) 2 * 1: use only an analog power supply. note: nitrogen hold time: 12 hours or more (at the time of shipment) exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. always be sure to use the product within the absolute maximum ratings. type no. measurement condition peak sensitivity wavelength p cut-off wavelength c photo sensitivity s = p * 2 noise equivalent power nep = p cutoff frequency fc output impedance maximum output voltage r l =1 k maximum current consumption * 3 element temperature t (c) ( m) ( m) (v/w) (w/hz 1/2 ) (hz) ( ) (v) (ma) g7754-01 -196 2.0 2.4 2 10 9 3 10 -14 2 to 500 50 10 15 g7754-03 5 10 8 1.5 10 -13 2 to 500 10 15 p7751-01 * 4 5.3 5.5 3 10 8 3 10 -13 5 to 10000 10 20 p7751-02 * 4 1.5 10 8 1 10 -12 5 to 12000 10 20 * 2: f=100 hz (g7754-01, g7754-03), f=1.2 khz (p7751-01, p7751-02) * 3: vs=15 v * 4: fov=60 required power supply speci cations g7754 series, p7751 series: 15 v (12.0 to 17.5 v can also be used) current capacity: 1.5 times or more of each module's maximum current consumption ripple noise: 5 mvp-p or less analog power supply only recommended dc power supplies: e3620a, e3630a (agilent technologies) features applications
infrared detector modules with preamps metal dewar type 2 spectral response dimensional outline (unit: mm) wavelength (m) d * ( , 1200, 1) (cm hz 1/2 /w) 10 9 0 10 10 10 12 10 11 10 13 12345678910111213 (typ. t=-196 c) 14 15 p7751-01/-02 g7754-01/-03 11.5 1 ln 2 fill port amp 11 1 127.5 1 51 1 70.0 1 6.5 1 18 1 32 1 37 1 12 2 window insb, mct 12 0.5 ingaas 14.3 0.5 63.5 1 90.5 2 10 2 172 2 signal output (bnc) dc input voltage 15 v (4-pin connector) foam polystyrene plug pump-out pipe 49.5 1 photosensitive surface kirdb0076ef kirda0010ee
cat. no. kird1024e09 nov. 2012 dn www.hamamatsu.com hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152- 375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: thorshamnsgatan 35 16440 kista, sweden, telephone: (46) 8-509-031-00, fax: (46) 8- 509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese, (milano), italy, telephone: (39) 02-935-81- 733, fax: (39) 02-935-81-741 china: hamamatsu photonics (china) co., ltd.: 1201 tower b, jiaming center, no.27 dongsanhuan beilu, chaoyang district, beijing 100020, china, telephone: (86) 10-6586-6006, fax: (86) 10-6586-2866 product specifications are subject to change without prior notice du e to improvements or other reasons. before assembly into fi nal products, please contact us for the delivery specification sheet to check the latest information. t ype numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(x)" which means preliminary specifications or a suffix "(z)" which means developmental specifications. t he product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. however, even if within the warranty period we accept absolutely no liability for any loss caused by natural d isasters or improper product use. copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. information described in this material is current as of november, 2012. infrared detector modules with preamps metal dewar type precaution for use the detector should not be placed horizontally during use. using these detectors in an environment subjected to vibration may cause microphonic noise. take measures to prevent vibration as needed. 2000 100 27 70 10 10 3 solder processing connector: hr10-7p-4p (made by hirose electric) shielded wire (4 conductors) 11 4.8 1.1 pin connection pin no. -vs lead color blue gnd black/white/blue stranded wire gnd +vs white cable (for dc power supply) a4372-02 kirda0196eb 3 the p7751-01 conforms to european emc directives: en 61326-1 class b.
|
