View HMC698LP510_5781183.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 1 general description features functional diagram typical applications 7 ghz integer n synthesizer (n = 12 - 259) hmc698lp5 / 698lp5e v03.0709 the h mc698lp5(e) is a frequency synthesizer with a wideband reversible polarity digital pfd and lock detect output. the divider operates unconditionally from 80 - 7000 m h z with a continuous integer division ratio of 12 to 259. the h mc698lp5(e) high frequency operation along with ultra low phase noise foor make possible synthesizers with wide loop bandwidth and low n resulting in fast settling and very low phase noise. when used in conjunction with a differential loop flter, the h mc698lp5(e) can be used to phase lock a vco to a reference oscillator. ultra low ss b phase noise floor: -153 dbc/ h z @ 10 k h z offset @ 100 m h z reference frequency. programmable divider (n= 12 - 259) operating up to 7 g h z open collector output buffer amplifers for interfacing w/ op-amp based loop filter reversible polarity pfd w/ lock detect output 32 lead 5x5mm s mt package: 25mm 2 electrical specifcations, t a = +25 c, vcc = vcc1 = vcc2 = vcc3 = vcc_pd = 5v the h mc698lp5(e) is ideal for: ? s atellite communication s ystems ? point-to-point radios ? military applications ? s onet clock generation parameter conditions min. typ. max. units maximum ref. input frequency s ine or s quare wave input [1] 1300 m h z minimum ref. input frequency s quare wave input [2] 10 m h z reference input power range 100 m h z frequency -5 +5 dbm maximum vco input frequency 7000 m h z minimum vco input frequency 80 m h z vco input power range 100 m h z input frequency -10 +5 dbm pfd output voltage 2000 mv, pk - pk pfd gain gain = vpp / 2 rad. 0.32 v/rad. ss b phase noise @ 10 k h z offset @ 100 m h z s quare wave ref. input pin= 0 dbm -153 dbc/ h z total s upply current 310 ma [1] maximum frequencies may be limited by available counter division ratio. [2] s quare wave input achieves best phase noise at lower ref. frequency (see sine & square wave comparison plots)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 2 -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) hmc698lp5 / 698lp5e v03.0709 9tphetc835p5(t8t)i83h5)cs5(t a8tftrqtutqncy fdiglt8zsgltmnzz-t krmkqmkpm (l1tft)s lt2iflztlrrtftwj9nl fdiglt8zsgltmnzz-t krmkqmkpm (l1tft)s lt2iflztlrrtftnl -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) 7315/m 315+6mm05 cy )15u5fs7015715225u5o 7315/m 315+6mm05 cy )15u5fs7015715225u5 7315/m 315+6mm05 cy )15u5f 815715225u5y 7315/m 315+6mm05 cy )15u5fs7015715225u5y -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 -10 dbm -5 dbm 0 dbm +5 dbm ssb phase noise (dbc/hz) offset frequency (hz) [1] phase noise floor vs offset frequency with varying ref power level [2] fin= 7000 m h z @ 0 dbm, ref frequency = 100 mhz, n = 70 [3] phase noise floor remains constant beyond 100 k h z offset frequency
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 3 hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 +25c +85c -45c ssb phase noise (dbc/hz) offset frequency (hz) phase noise floor vs offset frequency with varying fin @ 0 dbm, ref = 100 mhz square wave @ 5 dbm, vcc = 5v [3] -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 1000 mhz 7000 mhz ssb phase noise (dbc/hz) offset frequency (hz) -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 +25c +85c -45c ssb phase noise (dbc/hz) offset frequency (hz) phase noise floor [1][2][3] ref = sine wave @ 5 dbm, vcc = 5v phase noise floor [1][2][3] ref = square wave @ 5 dbm, vcc = 5v [1] phase noise floor vs offset frequency over temperature [2] fin= 7000 m h z @ 0 dbm, ref frequency = 100 mhz, n = 70 [3] phase noise floor remains constant beyond 100 k h z offset frequency
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 4 typical dc characteristics @ vcc = +5v s ymbol characteristics +25c units min. typ. max. icc power s upply current 280 310 340 ma voh output h igh voltage, (nu, nd) 5 5 5 v vol output low voltage, (nu, nd) 2.9 3.0 3.1 v absolute maximum ratings rf input (vcc= +5v) +10 dbm s upply voltage (vcc) +5.5v logic inputs -0.5v to (0.5v + vcc) junction temperature (tc) 135 c continuous pdiss (t = 85 c) (derate 78 mw/ c above 85 c) 3.9 w thermal resistance (junction to ground paddle) 12.90 c/w s torage temperature -65 to +150 c operating temperature -40 to +85 c typical supply current vs. vcc vcc (vdc) icc (ma) 4.75 294 5.00 310 5.25 342 note: h mc698lp5 will work over full voltage range above. electro s tatic s en s itive device ob s erve h andling precaution s hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 5 outline drawing part number package body material lead finish m s l rating package marking [3] h mc698lp5 low s tress injection molded plastic s n/pb s older m s l1 [1] h 698 xxxx h mc698lp5(e) ro hs -compliant low s tress injection molded plastic 100% matte s n m s l1 [2] h 698 xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx package information note s : 1. leadframe material: copper allo y 2. dimen s ion s are in inc h e s [millimeter s ]. 3. lead s pacing tolerance i s non-cumulative 4. pad burr lengt h sh all be 0.15mm maximum. pad burr h eig h t sh all be 0.05mm maximum. 5. package warp sh all not exceed 0.05mm. 6. all ground lead s and ground paddle mu s t be s oldered to pcb rf ground. 7. refer to h ittite application note for s ugge s ted pcb land pattern. hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 6 pin description pin number function description interface schematic 1 ld pulsed output. average low = unlocked. average h ig h = locked 2 inv pfd invert function cmo s compatible input control bit logic low = normal logic h ig h = invert 4, 5, 18, 25 vcc1, vcc3, vcc2, vcc_pd s upply voltage 5v 0.25v 9 - 14 n0 - n5 cmo s compatible control input bit 0 (l s b) - 5 15 fin (these pins are ac coupled and must be dc blocked externally.) frequency input frequency input complement 16 nfin 22, 23 s 1, s 0 cmo s compatible control input bit 0 (l s b) -1 hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 7 pin number function description interface schematic 28 ref reference input reference input complement (these pins are ac coupled and must be dc blocked externally.) 27 nref 30 nd down output 31 nu up output 3, 6 - 8, 17, 19 - 21, 24, 26, 29, 32 n/c no connection. these pins may be connected to rf/dc ground. performance will not be affected. ground paddle gnd package bottom has an exposed ground paddle that must be connected to rf/dc ground hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259) pin description (continued)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 8 hmc698lp5(e) programming truth table division ratio n n counter n counter decimal s et s wallow s counter s wallow s decimal s et (l s b) n0 n1 n2 n3 n4 n5 (l s b) s 0 s 1 12 3 2 0 0 0 1 0 0 0 0 0 0 13 3 2 1 1 0 1 0 0 0 0 1 0 14 3 2 2 2 0 1 0 0 0 0 0 1 15 3 2 3 3 0 1 0 0 0 0 1 1 16 4 3 0 0 1 1 0 0 0 0 0 0 17 4 3 1 1 1 1 0 0 0 0 1 0 18 4 3 2 2 1 1 0 0 0 0 0 1 19 4 3 3 3 1 1 0 0 0 0 1 1 20 5 4 0 0 0 0 1 0 0 0 0 0 21 5 4 1 1 0 0 1 0 0 0 1 0 22 5 4 2 2 0 0 1 0 0 0 0 1 23 5 4 3 3 0 0 1 0 0 0 1 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 63 62 0 0 0 1 1 1 1 1 0 0 253 63 62 1 1 0 1 1 1 1 1 1 0 254 63 62 2 2 0 1 1 1 1 1 0 1 255 63 62 3 3 0 1 1 1 1 1 1 1 256 64 63 0 0 1 1 1 1 1 1 0 0 257 64 63 1 1 1 1 1 1 1 1 1 0 258 64 63 2 2 1 1 1 1 1 1 0 1 259 64 63 3 3 1 1 1 1 1 1 1 1 n = int (n/p) s = mod (n/p) where: n = desired division ratio p = prescaler value = 4 n = counter n value (counter decimal set is n - 1) hmc698lp5(e) programming truth table, non-continuous division ratios division ratio n n counter n counter decimal s et s wallow s counter s wallow s decimal s et (l s b) n0 n1 n2 n3 n4 n5 (l s b) s 0 s 1 8 2 1 0 0 1 0 0 0 0 0 0 0 9 2 1 1 1 1 0 0 0 0 0 1 0 10 2 1 2 2 1 0 0 0 0 0 0 1 n = int (n/p) s = mod (n/p) where: n = desired division ratio p = prescaler value = 4 n = counter n value (counter decimal set is n - 1) hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 9 hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259) evaluation pcb circuit
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 10 evaluation pcb list of materials for evaluation pcb 122625 [1] item description j1 - j4 pc mount s ma rf connector j5 - j6 2mm dc h eader c1 - c5, c8 - c10 1000 pf capacitor, 0402 pkg c6 - c7 100 pf capacitor, 0402 pkg c15 1000 pf capacitor, 0603 pkg c16 4.7 f tantalum capacitor case a d led green, 0603 pkg r1 10k ohm, resistor, array r8, r9 10k ohm, resistor, 0402 pkg. r11 1k ohm, resistor, 0402 pkg. r12 100 ohm, resistor, 0402 pkg. u1 h mc698lp5(e) s ynthesizer pcb [2] 116106 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the fnal application should use rf circuit design techniques. s ignal lines should have 50 ohm impedance while the package backside ground paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from h ittite upon request. note: the evaluation pcb for the h mc698lp5 contains 10k ohm pull up resistors for each of the 9 control inputs. programming the 251 distinct division ratios consists of installing or removing jumpers n0 through n5 and s 0, s 1. note: 0 = jumper installed. 1 = jumper not installed. evaluation pcb truth table (see programming truth table) hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 11 typical pll application circuit using hmc698lp5 pll application shown for a 13.0 g h z fout. contact h mc to discuss your specifc application. hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com pll - integer- n sy nt h e s i z er - s mt 6 6 - 12 cmos/ttl input characteristics maximum input logic 0 voltage (v il maximum ) = 1.1v @ 1 a. minimum input logic 1 voltage (v i h minimum ) = 1.8v @ 50 a. input iv characteristics for the logic inputs (n0 - n5, s 0 - s 1) are shown below: -0.1 0 0.1 0.2 0.3 0.4 0 1 2 3 4 5 input current (ma) input voltage (v) v il max v ih min hmc698lp5 / 698lp5e v03.0709 7 ghz integer n synthesizer (n = 12 - 259) typical application showing spurious performance typical application 13 ghz measured phase noise [1] -180 -170 -160 -150 -140 -130 -120 -110 -100 10 2 10 3 10 4 10 5 10 6 10 7 measured calculated ssb phase noise (dbc/hz) offset frequency (hz) [1] phase noise floor remains constant beyond 100 k h z offset frequency. measured phase noise using agilent 5500 with 2 unit measurement technique and corresponding calculated phase noise foor.

▲Up To Search▲

Price & Availability of HMC698LP510

	To Download HMC698LP510 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .