15 allied components interna tional 714-665-1 140 www.a llie d c o m pone n ts. c o m rohs 12/02/11 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) 1 . 000(2 5 . 40) 0 . 395(10. 03) 0 . 260(6. 60) m a x 0 . 020 (0. 50) 0 . 300(7. 62) 0 . 118(3 . 00) 0 . 900(22. 86) 0 . 100 (2. 5 4 ) p i n 1 allied dat e c ode AHTA-2003BS all specifications subject to change without notice. mechanical 10/100 base t dual port transformer AHTA-2003BS cw/w: 50pf typ @ 100khz, 200mv polarity: 1-20, 4-17, 6-15, 9-12, in-phase ll: 0.5h max @ 100khz, 200mv dcr: 0.9 operating temp: 0oc to 70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv t urns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHTA-2003BS 350 1ct :1ct(tx)/1ct:1ct(rx) -1.1 -18 -14.4 60-80mhz -12 50mhz -13.1 part number AHTA-2003BS electrical speci?cations @ 25c cross t alk (db min) hi-pot (vrms) -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -33 0.3-30mhz -42 60mhz isolation ?
|