embedded touch modules features specifcations touch technology resistive type host site interface usb: conforms to usb 1.1 rs-232 serial: 8 data bits, 1 stop bit, no parity, and full duplex host site connector 2.0 mm, 10-pin, male header for combo interface (usb and rs-232) communication baud rate 9,600 (default) host site connector 2.0 mm, 10-pin, male header for combo interface (usb and rs-232) touch screen connector 4-wire: 1.0 mm, 4-pin, ffc/fpc header support voltage and current + 5.0 v, 100 ma touch resolution 2048 x 2048, size independent conversion time max. 20 ms per coordinate set dimensions (l x w x h) 75 x 20 x 10 mm o.s support windows 2000/ xp/ vista/ 7, wince 5.0/ 6.0/ 7.0, linux, temperature ranges operation: -25 to +8 c storage: -25 to +85 c power consumption (*) sleep mode (usb suspend): < 2.5 ma idle mode (un-touch): < 20 ma working mode (touch): < 70 ma dimensions (l x w x h) 75 x 20 x 10 mm (*) the power consumption may be different with the above if the resistance of sensor is different. rohs compliant 2002/95/ec ETM-RES05C new ? resistive touch technology, supports 4-wire touch screen ? supports usb and rs-232 interface ? resolution support to 2048 x 2048 ? high reliability and fast conversion time resistive type single-touch module ordering information part no. product description ETM-RES05C-eeh4ee resistive type touch module, single touch, 4-wire all product specifications are subject to change without notice last updated : 25-jun-2012
|