series 536 plcc test & burn-in zero insertion force sockets note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. features: ? a choice of several pin count devices can be inserted with- out bending or otherwise damaging the legs, since no force is required to either insert or remove the component from the socket. ? compatible with pick and place operations. ? corner posts provide positive package registration. ? socket accepts jedec types mo-047, mo-016, and other ceramic, leadless or j-lead packages (shims required). consult factory. specifications: ? socket body is black ul 94v-0 glass-filled polyphenylene sulfide (pps). ? contacts are beryllium copper alloy 172. ? contact plating is 12 [.30 m] min. gold per mil-g-45204 over 50 [1.27 m] min. nickel per sae-ams-qq-n-290. ? hardware is stainless steel. ? contact current rating=1 amp. ? contact resistance=30 mohms max. (initial). ? insulation resistance=1000 mohms min. ? dielectric strength=700 vac cont. for 1 minute. ? self inductance=8.9 h max. at 10 mhz. ? operating temperature=-67f to 338f [-55c to 170c]. ? life cycle: 10,000 insertions minimum. mounting considerations: ? see data sheet no. 10007. no. of pins dim. "a" dim. "b" dim. "c" dim. "d" dim. "e" dim. "f" dim. "g" dim. "h" 20 1.024 [26.0] 1.457 [37.0] 2.087 [53.0] 1.748 [44.4] 0.752 [19.1] 0.618 [15.7] 1.256 [31.9] 1.358 [34.5] 28 1.181 [30.0] 1.610 [40.9] 2.213 [56.2] 1.791 [45.5] 0.787 [20.0] 0.669 [17.0] 1.417 [36.0] 1.519 [38.6] 32 1.175 [29.8] 1.585 [40.3] 2.291 [58.2] 1.772 [45.0] 0.720 [18.3] 0.689 [17.5] 1.378 [35.0] 1.488 [37.8] 44 1.339 [34.0] 1.772 [45.0] 2.480 [63.0] 1.941 [49.3] 0.787 [20.0] 0.787 [20.0] 1.575 [40.0] 1.673 [42.5] 52 1.500 [38.1] 1.921 [48.8] 2.787 [70.8] 2.091 [53.1] 0.819 [20.8] 0.827 [21.0] 1.700 [43.2] 1.823 [46.3] 68 1.653 [42.0] 2.343 [59.5] 3.047 [77.4] 2.425 [61.6] 0.925 [23.5] 0.906 [23.0] 1.929 [49.0] 2.244 [57.0] 84 1.890 [48.0] 2.579 [65.5] 3.370 [85.6] 2.645 [67.2] 0.925 [23.5] 1.063 [27.0] 2.173 [55.2] 2.484 [63.1] ordering informa tion xx-536-11 no. of pins (see table ) series gold over nickel plating solder tail pin all dimensions : inches [ millimeters ] all tolerances .005 [.13] unless otherwise specified printouts of this document may be out of date and should be considered uncontrolled 10006 rev.d latch design may differ from size to size see data sheet no. 10007 for mounting considerations north america frenchtown, nj usa tel: (908) 996-6841 fax:(908) 996-3891 europe tel: +44 870 240 0249 fax: +44 871 919 6033 europe@arieselec.com http://www.arieselec.com ? info@arieselec.com abc
|