c10439 series photodiode modules are high-precision photodetectors that integrate a si photodiode and a current-to-voltage ampl ifier. the output from these photodiode modules is an analog voltage and can be easily checked with a voltmeter, etc. since their sensitivity is switchable between two ranges (high/low), highly accurate output can be obtained by selecting the proper sensitivity range that matches the light level to be detected. c10439 series is available with three different active areas. features l precision photometry l light source power monitors l fluorescence detection of printed matter l illuminometers l color difference meters l refractometer l flowmeters, etc. applications l voltage output for easy handling l two-range (high/low) switching function l only half size of a business card l can be mounted on optical bench rod (m4) l choice of active areas C10439-01: 2.4 2.4 mm c10439-02: 5.8 5.8 mm c10439-03: 10 10 mm module photodiode module integrates a si photodiode for precision photometry with low-noise amp c10439 series 1 absolute maximum ratings (ta=25 c) parameter symbol value unit supply voltage vcc max. 13 v operating temperature * 1 topr 0 to +50 c storage temperature * 1 tstg -10 to +60 c *1: no condensation recommended operating range parameter symbol min. typ. max. unit supply power voltage vcc 5 - 12 v electrical and optical characteristics (ta=25 c, vcc=12 v, unless otherwise noted) parameter symbol condition min. typ. max. unit spectral response range - 190 to 1100 - nm peak sensitivity wavelength p - 960 - nm high range, = p - 23 - saturation input optical power low range, = p - 2360 - nw high range, = p - 500 - photo sensitivity s low range, = p - 5 - mv/nw high range dc 10 - frequency bandwidth (-3 db) fc low range dc 1000 - hz high range - 1 10 9 - conversion impedance zt low range - 1 10 7 - v/a maximum output amplitude v fs vcc=5 to 12 output current io=1 ma +vcc - 0.5 +vcc - 0.2 - v dark voltage vd dark state -5 - +5 mv time drift (drift over time) - dark state ta=25 c * 2 -0.5 - +0.5 mv/day output noise voltage width vn dark state, within frequency band - 2 5 mvp-p capacitive load c l 500 - - pf output resistance zo - 100 - ? current consumption icc dark state - - 2 ma *2: dark voltage variation per day, measured at 25 c after a 10-minute warm-up after power-on.
photodiode module c10439 series 2 kaccb0153ea (typ. ta=25 ?c) wavelength (nm) photo sensitivity (mv/nw) 200 400 600 800 1000 1200 1 1000 100 10 low range high range spectral response block diagram output voltage vs. input light kaccc0364ea input light (nw) output voltage (v) (typ. ta=25 ? c, vcc=12 v, = p) 0.001 0.01 0.1 1 10 100 1000 10000 100 10 1 0.1 0.01 high range low range kaccb0172ea pd +vcc out gnd -vcc i-v conversion amplifier rf range selector switch
photodiode module c10439 series 3 dimensional outlines (unit: mm, torelance: 0.2 mm unless otherwise noted) C10439-01 c10439-02 c10439-03 46 19 59 34 52 44 12.6 * 14.3 * 14.1 * m4 depth 4.5 * 0.15 high/low range selector switch connector: bnc connector: hr10a-7r-4p (2 ) m3 depth 4 active area 2.4 2.4 kacca0203ea kacca0204ea 46 19 59 34 52 44 12.6 * 14.3 * 14.1 * m4 depth 4.5 * 0.15 high/low range selector switch connector: bnc connector: hr10a-7r-4p (2 ) m3 depth 4 active area 5.8 5.8 46 19 59 34 52 44 12.6 * 14.3 * 14.1 * m4 depth 4.5 * 0.15 high/low range selector switch connector: bnc connector: hr10a-7r-4p (2 ) m3 depth 4 active area 10 10 kacca0205ea
hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184, www.hamamats u.com u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 08152 -3750, fax: (49) 08152-2658 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv ? gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8-509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. ?2008 hamamatsu photonics k.k. photodiode module c10439 series cat. no. kacc1139e02 feb. 2008 dn 4 accessory cable for power supply: length 1 m (no connector on one end) connection examples connection with dc voltmeter, oscilloscope, etc. connection with signal processing unit for photodiode module kaccc0365ea kaccc0366ea connection cable for photodiode module * voltmeter, oscilloscope, etc. 5 to 12 v power supply * accessory of photodiode module +v -v gnd nc photodiode module c10439 series secure with optical bench rod, etc. bnc cable signal processing unit for photodiode module c10475 rs-232c cable bnc cable connection cable for pd module ac 100 to 240 v 50/60 hz photodiode module c10439 series secure with optical bench rod, etc. ac adapter (not needed when c10475 operates on battery) pc (with supplied software installed)
|
