north america: 1-800-366-2266 visit www.macom.com for complete contact and product information. S11 10 to 500 mhz thin film spst switch ? low insertion loss: < 2.5 db (typ.) ? high on/off ratio: 60 db (typ.) ? low vswr: 1.6:1 (typ.) ? ttl compatable specifications (rev. date: 3/02)* guaranteed characteristics typical 0 to 50 c -54 to +85 c insertion loss (max.) 10-100 mhz < 1. 7 db 2.3 db 2.7 db 100-300 mhz < 2.0 db 2.6 db 3.0 db 300-500 mhz < 2.5 db 4.0 db 4.5 db isolation 10-100 mhz > 67 db 54 db 52 db 100-300 mhz > 62 db 50 db 48 db 300-500 mhz > 48 db 39 db 36 db vswr input/output (max.) in on state 10-500 mhz 1.9:1 2.4:1 2.6:1 switching speed (10-90%) 8 ns 20ns 20 ns dc current (max.) at +5v 45 ma 55 ma 60 ma *measured in a 50-ohm system at +5 vdc nominal. absolute maximum ratings ambient operating temperature -54 to +125 c storage temperature -62 c to +125 c max. case temperature 125 c max. dc voltage +6 volts max. continuous rf input power +10 dbm max. short term rf input power 100 mw max. peak power (1 minute max.) 1 w ?s? series burn-in temperature (case) 125 c switching conditions input pins on state off state a 0 1 1 0 b 0 1 0 1 outline drawings package to-8 figure be model S11 schematic diagram m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without not ice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com as sume any liability whatsoever arising out of the use or application of any product(s) or information.
S11 north america: 1-800-366-2266 visit www.macom.com for complete contact and product information. typical performance at 25 c typical automatic test data
|
