z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) specification SSC-UR202 (rev 1.0, general) customer approval approval dra w n ssc
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) [ contents ] 1. absolute maximum ratings 2. electro-optical characteristics 3. characteristic diagr a m 4. soldering prof ile 5. outline dimension 6. packing 7. reel packing structure 8. precaution for use
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) SSC-UR202 SSC-UR202 ? 3 . 0 x 1. 5 x 1.4 m m ? i nn e r len s t y pe , cl e a r m o ld ? w a v e l eng t h : 640 nm features description - s mall si z e suitable for compact applian c es - s urface-mount ed and leadless ch ip led d e vice - h i g h brigh t ness, wi de vari ety of c o lor s are availab l e - t ape and reel packing - i n c rea s es t h e lif e tim e of batt ery applications ?c e l l u l a r p h o n e ? s keypad l i g h t n i ng ?o t h e r d e c o r a t i o n li gh t i ng
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) 1. absolute maximum ratings 2. e l ectro-opt i cal characteris t ics st or ag e temper atu r e v 5 v r r e verse vo ltage mw 66 p d po we r dissi patio n o p e r atio n temper atu r e ma 50 i fm *1 p e ak f o r w ar d curren t ma 30 i f for w ar d current un i t value symb ol pa ra meter (ta=2 5 ) *1 i fm cond it io n s : pu ls e w i dt h tw min - 160 10 2.2 max 70 20 640 120 - 1.9 typ ? ? 1/2 viewing angle *3 nm i f =20 ? wav e le n g th v i f =20 ? f o rwa r d vo ltage nm i f =20 ? ? spec tr al b a ndwi dth mcd i f =20 ? luminous i n t e nsity *2 ? revers e current un i t c o n d iti o n symb o l pa ra meter (ta=2 5 ) * 2 th e lu m i n o u s in t e n s ity iv is m e as ur ed at th e peak of the spat i a l p attern w h ic h m a y not be alig n e d wi t h t h e m e c h a n ica l axis of the l e d packa g e . *3
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) 3. characteris t ic diagram f o rwa r d curre nt vs fo rwa r d v o ltage r e lative in te nsity vs fo rwa r d cu r r e nt 1.6 1 .7 1.8 1 .9 2.0 1 10 100 f o rward cu rre nt i f (m a) f o r w ar d vo l t a ge v f (v) 0 5 1 0 15 20 25 30 3 5 0 20 40 60 80 10 0 12 0 14 0 r e l a tive inte ns ity i v (%) f o r w a r d c u rre n t i f (m a ) for w ar d current vs der a t i n g curve r a d i atio n diag ra m - 2 5 0 25 50 7 5 1 0 0 0 10 20 30 40 fo rw ard curre n t i f (m a ) a m bi e n t t e m p er at ur e ta( o c w ? r y w ? r [ w ? r ] w ? r _ w ? r ` w ? ` w ? [ w ? _ w ? ] w ? t y w ? x u w w u \
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) 4. s o lde r ing pro f ile reflow sol d eri n g con d it ions/ profi l e (1) lead solder ? p reliminary heat in g t o be at 150 max. for 2 minu t e s ma x. ? s ol deri ng h e at t o be at 240 max. for 5 sec o n d s max. (2) lead - f ree solder ? p reliminary heat in g t o be at 150 max. for 2 minu t e s ma x. ? s ol deri ng h e at t o be at 260 max. for 10 sec o nds max. (3) hand solder ing condition ? n ot mor e t h an 3 sec o n d s @max28 0 , under s o ld ering ir on. [n ote] i n case t h e so ld ered prod ucts are reu s ed i n so lder in g process, we do n?t g u arantee th e prod ucts.
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) 5. outline d i mension tolerance: 0.1, unit: L 6. packin g tolerance: 0.2, unit: L (1 ) quantit y: 3,000pcs ./reel (2 ) cumul a t i ve toleran c e: cumul a tive toleran c e/10pi t ch es to be 0.2mm (3 ) adhes i on str e ng th of cover ta pe: adh e s i on str e ng th t o b e 0.1-0.7n when th e over tape is turned off from t h e carrier tap e at 10 ? ang l e t o be th e carr ier tap e . (4 ) pac k age: p / n, manu facturing data code no. and quantit y to b e ind i cat e d on a damp proof package.
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) 7. ree l packing st ructure ## w v u g a g j j j j j j j j j j s ? ? g u ? g g g j j j j j j j j j j * material: paper(sw3b (b)) s ize(mm) chip led a b outer box c chip led type 7 inch a 245 b 220 142 c ## s ? ? g u ? g g g j j j j j j j j j j w v u g a g j j j j j j j j j j aluminum vinyl bag reel
z-power led x10490 z-power led x10490 technical data sheet ssc ssc - - ur202 ur202 revision 1.0 revision 1.0 www.zled.com www.zled.com document no. : ssc-qp-7-07-24 (rev.00) 8. precaution for use (1 ) storage in order to avoid t h e abs o rp t i o n of mo is tu re, it is rec o mm end e d t o s t or e in t h e dry box (or des i c c at or) with a desic c ant. oth e rwise, to s t ore th em in t h e followi ng en vi ronment is recommended. temp eratur e : 5 ~30 hum i d i ty : 60%hr max. (2 ) att e nt ion after opened how e v e r l e d is c o rr e s p o n d ed s m d, wh en l e d be s o ld e r ed di p, in t e rf ac ial separat i on may a f fect t h e li ght transmissi on efficien cy, caus ing t h e light int e n s it y t o drop. at t e n t ion in followed. a . after open ed and moun t e d, the soldering shall be quickl y. b . keepi n g of a fr act i on temp eratur e : 5 ~ 40 hu mid i t y : le ss t h a n 30% (3 ) in case of more than 1 week p a ssed aft e r op e n ing or chang e c o lo r of indicat o r on d e s i ccan t c o mp on en ts sha l l be d r ied 10-12hr. at 60 5 . (4 ) in case of supp os ed the c o mp onent s is hu mid, shall be dried d i p-s o ld er ju s t bef o re. 100hr at 80 5 or 12hr at 100 5 . (5 ) an y mechan i c al force or any excess vi brat ion shall n o t be ac c e pt ed t o app l y durin g cooling proc ess t o no rmal t e mp. after soldering. (6 ) qui c k c ooli n g shall not be avoid. (7) c o mp on en ts s h all n o t be m o u n t ed o n warped d i re c t io n of pc b. (8 ) anti radioac t ive ray des i gn is n o t c o ns id er ed for th e p r odu c ts list e d h e r e in. ( 9 ) galli u m arse n i d e is u s ed in s o m e of t h e products list e d i n th is publicat ion. these prod uc ts are dang er ou s if they are burned or sma s h e d in th e pro c es s of disp osa l . i t is al s o dan g er o u s t o drin k t h e l i q u id or inhale th e gas g e n e rat e d by such prod uc ts when ch emic ally disp os ed. (10) thi s devi ce sh ou ld not be used in an y ty pe of fl ui d such as water, oi l , organ i c s o lv e n t an d et c. wh en wash in g is requ ir ed, ip a sh ou ld b e u s ed. ( 11) wh en t h e l e d s are il lu mi n a t i n g , opera t in g cu rren t sh o u ld b e de c i d e d af t e r c o ns id er ing th e amb i en t maximum t e mp eratur e . (12) le ds mus t be s t o r ed t o ma in ta in a clean atm o sp h e re. if the l e ds are st or ed for 3 mon t h s or more after bei n g shi p pe d from ssc, a sealed con t ai n e r wi th a nitrogen at mosph e re shou ld be used for st orage. (1 3 ) t h e l e ds m u st b e so lde r ed wi thi n se ven days a f ter open i n g th e moi s ture-proof packing. (14) repack unused products wi th anti -moi stu r e packi n g, fol d t o close any open i n g and th en st ore in a dry plac e. (15) the appearan c e and spec ifica t ions of the prod uc t may be modif i ed for i m provement wi th out not i ce.
|
